1. Introduction
The TiBurn E-Ink Smart Badge Holder T037G is an advanced identification device featuring an E-Ink display, NFC, and Bluetooth connectivity. It is designed to store and display worker qualifications, facilitate access control, and manage personnel information efficiently. This manual provides detailed instructions for setting up, operating, and maintaining your smart badge.
Image 1.1: Front and back view of the TiBurn E-Ink Smart Badge Holder. The front displays customizable information, while the back features a wireless charging symbol and an NFC tag area.
Key Features:
- E-Ink Display: Provides clear, readable information with low power consumption.
- NFC and Bluetooth Connectivity: Enables communication with smart devices and access control systems.
- Editable Information: Update badge content via a dedicated mobile application.
- Wireless Charging: Convenient and cable-free power replenishment.
- Long Battery Life: Designed for extended use between charges.
- Lightweight and Durable Design: Comfortable for daily wear.
2. Setup
2.1 Initial Charging
Before first use, ensure the smart badge is adequately charged. The device supports wireless charging. Place the badge on a compatible wireless charging pad. A full charge ensures optimal performance and battery life.
Image 2.1: The smart badge highlighting its 350mAh capacity, 6-month endurance (based on 5 NFC swipes/day), wireless charging capability, and ultra-thin design.
2.2 Mobile Application Installation
To manage and update the smart badge, download the official TiBurn application on your mobile device. The application is compatible with both iOS and Android operating systems.
- Search for the "TiBurn" app in your device's app store (Apple App Store for iOS, Google Play Store for Android).
- Download and install the application.
- Follow the on-screen prompts to create an account or log in.
2.3 Pairing the Smart Badge
The smart badge can be paired with your mobile device via NFC or Bluetooth for data synchronization.
- Ensure Bluetooth is enabled on your mobile device.
- Open the TiBurn application.
- Within the app, navigate to the device pairing section.
- Hold the smart badge near your phone for NFC pairing, or select the badge from the list of available Bluetooth devices to connect.
- Confirm the pairing request on both devices if prompted.
Image 2.2: The TiBurn mobile application interface demonstrating fast data transmission and real-time synchronization with the smart badge.
3. Operating Instructions
3.1 Updating Badge Information
The E-Ink display allows for dynamic updates of information such as names, titles, and certifications.
- Open the TiBurn application on your paired mobile device.
- Select the badge you wish to update.
- Enter or modify the desired text, graphics, or other data within the app's editing interface.
- Tap the "Update" or "Synchronize" button to transmit the new information to the badge. The E-Ink display will refresh to show the updated content.
3.2 Access Control and Check-in
The smart badge can be integrated with compatible access control systems and used for check-in/check-out procedures.
- NFC Access: For systems supporting NFC, simply tap the smart badge against the NFC reader to gain access or record your presence.
- Bluetooth Access: Depending on the system, Bluetooth connectivity may enable proximity-based access or require interaction with a paired device.
Image 3.1: Examples of the smart badge in various applications, including use as an employee ID, visitor pass, access control card, and check-in card.
3.3 Accessing Worker Certifications and Emergency Contact Information
The smart badge stores worker profiles, including certifications and emergency contact details, which can be accessed by scanning the badge with a smart device.
- Certification Verification: Scan the badge with a compatible smart device to instantly verify worker qualifications.
- Emergency Information: Emergency contact information stored on the badge can be crucial in incident situations. Note: This function requires self-developed software integration. The hardware supports this capability, but the software is not provided by TiBurn.
4. Maintenance
4.1 Battery Management
The TiBurn E-Ink Smart Badge Holder is designed for long battery life due to the low power consumption of E-Ink technology. Continuous display does not consume power.
- Battery Life: The battery can last up to 2 years with typical usage (e.g., updated twice a day).
- Charging: Recharge the badge wirelessly when the battery indicator in the app shows low power.
- Battery Replacement: The battery is replaceable. Contact customer support for assistance with battery replacement.
Image 4.1: Battery life comparison, illustrating the superior endurance of E-Ink technology (over 730 days) compared to LCD screens (less than 15 days).
4.2 Cleaning
To clean the smart badge, gently wipe the surface with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the E-Ink display or the badge's casing.
5. Troubleshooting
If you encounter issues with your TiBurn E-Ink Smart Badge Holder, refer to the following common solutions:
- Badge Not Updating:
- Ensure the badge is sufficiently charged.
- Verify that Bluetooth is enabled on your mobile device and the badge is paired.
- Check your internet connection for the mobile application.
- Restart the mobile application and attempt to update again.
- Connection Issues:
- Ensure the badge is within range of your mobile device for Bluetooth connection.
- For NFC, ensure the badge is placed directly over the NFC reader area of your device or access point.
- Try unpairing and re-pairing the badge with your device.
- Display Not Responding:
- Check the battery level. A very low battery might prevent display updates.
- If the display appears frozen, attempt a soft reset by fully charging the device.
For persistent issues, please contact TiBurn customer support. Users have reported responsive technical support for software-related concerns.
6. Specifications
Detailed technical specifications for the TiBurn E-Ink Smart Badge Holder T037G:
Image 6.1: Visual representation of the product specifications and dimensions.
| Specification | Value |
|---|---|
| Product Model | T037G |
| Device Size | 4.09 x 2.2 x 0.1 inches (104 x 58 x 3.3 mm) |
| Display | 3.7 inches, Black, White, and Red Electronic Paper |
| Resolution | 240*416 pixels |
| Operating Temperature | 0°C – 40°C |
| DPI | 129 |
| Product Weight | 1.76 ounces (29g) |
| NFC Frequency | 13.56MHz |
| Mobile Operating System | Android (Version 8.0 and above), iOS |
7. Warranty and Support
7.1 Warranty Information
Please refer to the product packaging or the official TiBurn website for specific warranty terms and conditions applicable to your region. Keep your proof of purchase for warranty claims.
7.2 Customer Support
For technical assistance, troubleshooting, or inquiries regarding your TiBurn E-Ink Smart Badge Holder, please contact TiBurn customer support through their official website or the contact information provided with your product.
7.3 Software Development Kit (SDK)
A Software Development Kit (SDK) is available for customers who wish to integrate the smart badge with existing ERP systems, business platforms, personnel management, or meeting management scenarios. Note: The SDK is typically provided for bulk purchases or specific project requirements. Please contact TiBurn for details on obtaining the SDK.