1. Introduction
This manual provides essential information for the safe and efficient use of your VINGLI Sleeper Chair Bed. This versatile furniture piece functions as a chair, lounger, and pull-out sofa bed, designed for comfort and convenience in various living spaces. It features integrated USB charging ports, cup holders, and side pockets.
Figure 1: VINGLI Sleeper Chair Bed in its standard chair configuration.
2. Safety Information
Please read and understand all safety warnings before using this product.
- Supervise children and pets to avoid entrapment risks from USB ports, side pockets, and cup holders.
- Keep the product away from open flames or high heat sources due to flammable synthetic materials.
- Ensure all components are securely assembled before use to prevent injury.
- Do not exceed the maximum weight limit of 380 pounds.
3. Setup and Assembly
Assembly is required for this product. It is recommended that two people perform the assembly to ensure safety and ease of construction.
3.1 Assembly Overview
Refer to the included assembly instructions for detailed, step-by-step guidance. Ensure all parts are present before beginning assembly. The primary components include the main chair frame, backrest, and pull-out bed mechanism.
3.2 Transforming from Chair to Bed
The chair can be easily converted into a bed. Follow these general steps:
- Ensure the area around the chair is clear to allow for full extension.
- Gently pull the hidden handle located at the front base of the chair to extend the footrest section.
- Continue pulling until the footrest is fully extended and locked into place.
- Adjust the backrest to your desired reclining position or lay it flat for a bed.
Figure 2: Visual guide for converting the chair to a bed.
Video 1: Demonstration of the 3-in-1 conversion and features of the VINGLI Sleeper Chair Bed.
4. Operating Instructions
4.1 3-in-1 Functionality
Your VINGLI Sleeper Chair Bed offers three primary modes:
- Chair Mode: Standard upright seating for daily use.
- Chaise Lounge Mode: Partially extended with an inclined backrest for relaxed lounging.
- Sofa Bed Mode: Fully extended with a flat backrest for sleeping or napping.
Figure 3: The three convertible modes of the Sleeper Chair Bed.
4.2 Adjustable Backrest
The backrest can be adjusted to three positions to suit your activity:
- 108°: Ideal for playing games or upright seating.
- 145°: Suitable for watching TV or reading.
- 180°: Fully flat for sleeping or napping.
Figure 4: Backrest adjustment options.
4.3 Integrated Features
The Sleeper Chair Bed includes convenient features for enhanced usability:
- USB Charging Ports: Two USB ports (Type A and Type C) are located on the left armrest for charging electronic devices.
- Cup Holders: Two cup holders are integrated into the armrests to keep beverages within reach.
- Side Pockets: Two side pockets provide storage for magazines, remote controls, or other small items.
Figure 5: Close-up view of the USB ports, cup holders, and side pockets.
5. Maintenance
To maintain the appearance and longevity of your Sleeper Chair Bed, follow these care instructions:
- Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Promptly blot spills with a clean, dry cloth to prevent staining.
- Inspection: Periodically check all fasteners and connections to ensure they remain tight. Retighten as necessary.
6. Troubleshooting
If you encounter any issues with your VINGLI Sleeper Chair Bed, please refer to the following common solutions:
- Difficulty converting: Ensure the area is clear and the mechanism is not obstructed. Apply gentle, even pressure when pulling or pushing the sections.
- Unstable feel: Check all assembly bolts and screws to ensure they are tightened. Verify the product is on a flat, even surface.
- USB ports not working: Confirm the power cable for the USB ports is properly connected to a power source. Test with a different charging cable and device.
If problems persist, contact customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | VINGLI |
| Model Number | SLEEPERCHAIR61 |
| UPC | 810158428287 |
| Product Dimensions (D x W x H) | 69.7"D x 35"W x 33.9"H |
| Item Weight | 77 Pounds |
| Weight Limit | 380 Pounds |
| Seating Capacity | 1 |
| Color | Black |
| Material Type | Synthetic (Polyester) |
| Frame Material Type | Engineered Wood |
| Upholstery Fabric Type | Microfiber/Linen |
| Item Firmness Description | Soft |
| Adjustable Backrest Positions | 3 (108°, 145°, 180°) |
| Number of Cup Holders | 2 |
| Additional Features | Adjustable Headrest, Recliner, Space Saving, Storage, USB Ports |
| Assembly Required | Yes |
| Recommended People for Assembly | 2 |
Figure 6: Detailed dimensions of the Sleeper Chair Bed.
8. Warranty Information
This VINGLI product comes with a Limited Warranty. For specific details regarding coverage, duration, and terms, please refer to the warranty documentation included with your purchase or contact VINGLI customer support.
9. Customer Support
For any questions, concerns, or assistance with your VINGLI Sleeper Chair Bed, please contact VINGLI customer support. You can also visit the official VINGLI store for more information and products:
