CYCLAMI CYCLAMI SUP - US
CYCLAMI 20PSI High Pressure SUP Electric Pump User Manual
Model: CYCLAMI SUP - US
Product Overview
The CYCLAMI 20PSI High Pressure SUP Electric Pump is a versatile and portable air inflator and deflator designed for various inflatables, including stand-up paddle boards, kayaks, surfing kites, tents, and pool items. It features a dual-stage inflation system, smart pressure control with auto-off, a large capacity rechargeable battery that doubles as a power bank, and an integrated LED light for convenience in low-light conditions.
Image: The CYCLAMI SUP Electric Pump shown with its various accessories, including the hose, car adapter, carrying bag, and multiple inflation nozzles.
Setup
1. Unpacking and Components
Carefully remove all components from the packaging. Ensure the following items are present:
- CYCLAMI 20PSI SUP Electric Pump
- High-pressure hose
- 12V Car Power Adapter
- Set of 6 universal nozzles (H3, H4, H5, H7, H8, and needle adapter)
- Storage bag
2. Charging the Pump
The pump is equipped with a built-in 12000mAh rechargeable battery. Before first use, fully charge the pump. Connect the provided 12V car adapter to the pump's charging port and plug it into a 12V car outlet. The LCD screen will indicate charging status. A full charge supports 4-6 inflations of a standard SUP board.
The pump can also function as an emergency power bank. Use the appropriate USB cable (not included) to connect your device to the pump's USB output port.
Image: The electric pump connected to a smartphone via a USB cable, demonstrating its power bank functionality.
3. Attaching the Hose and Nozzle
Connect one end of the high-pressure hose to the "Inflate" port on the pump (for inflation) or the "Deflate" port (for deflation). Securely twist the hose connector until it is firm. Select the appropriate nozzle for your inflatable item and attach it to the other end of the hose.
Operating Instructions
1. Inflation
- Ensure the hose is connected to the "Inflate" port and the correct nozzle is attached to your inflatable.
- Turn on the pump by pressing the power button. The LCD screen will illuminate.
- Use the '+' and '-' buttons to set the desired pressure (PSI or BAR). The pump supports pressures from 1 to 20 PSI.
- Press the power button again to start inflation. The pump will operate in a dual-stage mode:
- Stage 1 (High Volume): Provides 360L/min airflow for rapid initial inflation up to approximately 15 PSI.
- Stage 2 (High Pressure): Automatically switches to 60L/min high-pressure precision for fine-tuning and reaching the set PSI.
- The pump will automatically shut off once the preset pressure is reached, preventing overinflation.
Image: The electric pump actively inflating a stand-up paddleboard on a beach, demonstrating its primary function.
Image: A close-up view of the pump's digital display, showing the pressure setting and control buttons.
2. Deflation
To deflate an item, connect the hose to the "Deflate" port on the pump and the appropriate nozzle to your inflatable. Turn on the pump and press the power button to activate the deflation function. The pump will rapidly evacuate air, making items 3-5 times faster to store compactly.
Video: This video demonstrates the inflation and deflation capabilities of the CYCLAMI SUP Electric Pump, showing it in use with both an air mattress and a paddleboard. It highlights the ease of use and efficiency for both processes.
3. Using the LED Light
The pump includes an integrated LED light for use in dark environments. Press the dedicated light button on the control panel to turn the light on or off. This feature is useful for camping, late-night setups, or emergency repairs.
Image: A detailed view of the pump's side, highlighting the bright LED light in operation, useful for nighttime visibility.
Nozzle Compatibility
The CYCLAMI SUP Electric Pump comes with 6 different nozzles to ensure compatibility with a wide range of inflatable items. Refer to the table below for common uses:
| Nozzle Type | Description / Common Use |
|---|---|
| H3 | For Stand Up Paddle Boards (SUPs) and other high-pressure inflatables. |
| H4 | Suitable for inflatable kayaks and airboats. |
| H5 | Ideal for floating toys and larger low-pressure inflatables. |
| H7 | For air cushions and smaller inflatable items. |
| H8 | Used for inflatable tents and similar structures. |
| Needle Adapter | For sports balls (e.g., yoga balls, basketballs). |
Image: A visual guide illustrating the six different nozzle types included with the pump and examples of the inflatables they are designed for.
Maintenance
- Cleaning: Wipe the pump's exterior with a soft, damp cloth. Do not submerge the pump in water.
- Storage: Store the pump and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, charge the pump at least once every three months if not in regular use.
- Hose and Nozzles: Inspect the hose and nozzles regularly for any signs of wear or damage. Replace if necessary to ensure efficient operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not turn on. | Low battery or no power. | Charge the pump using the 12V car adapter. Ensure the adapter is securely connected. |
| Pump inflates slowly or not to desired PSI. | Incorrect nozzle, hose not securely attached, or leak in inflatable. | Verify correct nozzle is used and securely attached. Check hose connections. Inspect inflatable for leaks. |
| Pump stops unexpectedly. | Reached preset PSI, low battery, or overheating. | Check if target PSI is reached. Recharge battery if low. Allow pump to cool down if it feels hot. |
| LCD screen is not clear. | Direct sunlight or extreme temperature. | Move to a shaded area or allow pump to return to normal operating temperature. |
Specifications
| Feature | Detail |
|---|---|
| Brand | CYCLAMI |
| Model Name | CYCLAMI SUP - US |
| Color | BLACK |
| Material | Plastic |
| Item Weight | 4.7 Pounds (approx. 2.13 kg) |
| Power Source | Battery Powered (12000mAh) |
| Air Flow Capacity | Stage 1: 360 LPM; Stage 2: 60 LPM |
| Maximum Pressure | 20 PSI (Pound per Square Inch) |
| Operation Mode | Automatic (with auto-off) |
| Included Components | Air Pump, High-Pressure Hose, 12V Car Adapter, 6 Nozzles, Storage Bag |
Warranty and Support
The CYCLAMI 20PSI High Pressure SUP Electric Pump comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any inquiries regarding your product, please contact CYCLAMI customer service through the retailer where you purchased the product or visit the official CYCLAMI website for contact information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.