1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PGST Wireless Home Alarm System, model PG109F-US-F. This system is designed to enhance the security of your home or apartment with its WiFi and 4G connectivity, allowing for remote monitoring and control via a smartphone application. The kit includes various sensors and control devices to provide comprehensive protection.
Image: Overview of the PGST Wireless Home Alarm System components.
2. Package Contents
Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
Image: Detailed view of the PGST Wireless Home Alarm System F package contents.
| Component | Quantity |
|---|---|
| Alarm Host (Control Panel) | 1 |
| Motion Detector | 5 |
| Entry Sensor (Door/Window Sensor) | 10 |
| RFID Card | 3 |
| Remote Fob | 3 |
| Alarm Siren | 1 |
| SOS Button | 1 |
| Motion Sensor Bracket | 1 |
| Screw Kit | 1 |
| Charger | 1 |
| User Manual | 1 |
3. Setup and Installation
The PGST Wireless Home Alarm System is designed for easy DIY installation without the need for complex wiring or drilling. Follow these steps to set up your system.
3.1 Powering the Alarm Host
- Connect the provided charger to the alarm host's power input.
- Plug the charger into a standard wall outlet.
- The alarm host will power on automatically.
Image: The alarm host control panel, showing its display and connectivity options.
3.2 App Installation and Connectivity
- Download the "Smart Life" application from your smartphone's app store (available for iOS and Android).
- Register for an account or log in if you already have one.
- Follow the in-app instructions to add your PGST alarm host. Ensure your phone is connected to a 2.4GHz Wi-Fi network during the initial setup, as 5G networks are not supported by the alarm system.
- The system supports both WiFi and 4G connectivity for reliable communication.
Image: Screenshots illustrating the Smart Life application interface for managing the alarm system.
3.3 Sensor Installation
Strategically place door/window sensors and motion detectors in key areas of your home. Ensure sensors are within range of the alarm host.
- Door/Window Sensors: Mount the two parts of the sensor on a door or window frame and the moving part, ensuring they are aligned and close to each other (typically within 1 cm) when the door/window is closed.
- Motion Detectors: Install motion detectors in corners of rooms or hallways, ensuring they have a clear line of sight to the area they are protecting. Avoid placing them near heat sources or in direct sunlight to prevent false alarms.
Image: Installation of a door/window entry sensor.
Image: A PGST door and window sensor.
Image: A motion detector installed in a home environment.
4. Operating Instructions
4.1 Arming and Disarming the System
The system can be armed or disarmed using the Smart Life app, remote fobs, or voice commands.
- Arm (Away Mode): Activates all indoor and outdoor sensors. Use this mode when leaving your home.
- Home Arm (Stay Mode): Activates outdoor sensors while allowing free movement within your home by disarming indoor sensors.
- Disarm: Deactivates all sensors.
- SOS Button: Triggers an immediate alarm and sends notifications in case of an emergency.
Image: Remote fob for arming, disarming, and emergency functions.
4.2 Using the Smart Life App
The Smart Life app provides comprehensive control over your alarm system from anywhere.
- Remote Control: Arm, disarm, or set to home arm mode remotely.
- Real-time Alerts: Receive instant notifications on your smartphone when a sensor is triggered.
- System Management: Add or remove sensors, adjust settings, and view system status.
Image: Smartphone displaying the Smart Life app for remote alarm control.
4.3 Voice Control with Alexa
Integrate your alarm system with Amazon Alexa for convenient voice control.
- Enable the Smart Life skill in your Alexa app.
- Link your Smart Life account with Alexa.
- Use commands such as "Alexa, arm alarm system" or "Alexa, disarm" (a PIN may be required for disarming).
Image: Voice control functionality with Amazon Alexa.
4.4 Using RFID Cards
For quick arming or disarming without a password, use the provided RFID cards.
- Present an authorized RFID card to the designated reader area on the alarm host.
- The system will switch its arming state (arm/disarm) based on the current status.
Image: RFID card for convenient system control.
4.5 Expanding the System
The PGST alarm system supports expansion with up to 99 sensors and 5 remotes. Additional motion sensors, door sensors, and other compatible accessories can be easily added through the Smart Life app or the alarm host's interface.
5. Maintenance
- Battery Check: Regularly check the battery status of wireless sensors via the Smart Life app. Replace batteries as needed to ensure continuous protection. The alarm host includes a Lithium Ion battery for backup power.
- Cleaning: Clean the alarm host and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Smart Life app for available firmware updates for the alarm host to ensure optimal performance and security.
- Sensor Placement: Ensure sensors remain securely mounted and their detection areas are unobstructed.
6. Troubleshooting
If you encounter issues with your PGST Wireless Home Alarm System, refer to the following common solutions:
| Problem | Possible Cause / Solution |
|---|---|
| System not connecting to Wi-Fi |
|
| Sensors not triggering alarm |
|
| False alarms |
|
| Remote control not working |
|
| Poor range for sensors |
|
| Difficulty understanding alarm host interface |
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | PGST |
| Model Number | PG109F-US-F |
| Connectivity Technology | Wireless (WiFi, 4G) |
| Compatible Devices | Smartphone (Smart Life App), Amazon Alexa |
| Control Method | App, Voice, Remote Fob, RFID Card |
| Power Source | AC/DC (with Lithium Ion backup battery) |
| Installation Type | Wireless DIY |
| Alert Type | Motion, Entry, Siren (120 Decibels) |
| Item Dimensions (L x W x H) | 8.3 x 6 x 5.7 inches |
| Item Weight | 2.47 Pounds |
| Recommended Uses | Indoor Home Security |
| Material | Plastic |
| Color | Black |
| Max Sensors Supported | 99 |
| Max Remotes Supported | 5 |
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your PGST Wireless Home Alarm System, please refer to the contact details provided with your product packaging or visit the official PGST website. Keep your purchase receipt as proof of purchase for warranty claims.
You can also visit the PGST Store on Amazon for additional product information and support resources.
