Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your VINGLI 60-Quart Patio Cooler Cart. Please read this manual thoroughly before use to ensure proper function and longevity of your product.
Image: The VINGLI 60QT Patio Cooler Cart in black, showcasing its design with wheels and a built-in bottle opener.
Safety Information
- Ensure all parts are securely fastened before use.
- Do not overload the cooler beyond its stated capacity.
- Keep children and pets away from the cooler during assembly and while in use.
- Place the cooler on a stable, level surface to prevent tipping.
- Use caution when moving the cooler, especially when full. Engage wheel locks when stationary.
Package Contents
Verify that all components listed below are present before beginning assembly:
- Cooler Basin (60-Quart capacity)
- Rolling Stand/Cart Frame
- Bottom Storage Shelf
- Wheels (4 total, 2 with locks)
- Lid Handles (2)
- Bottle Opener with Cap Catcher
- Drain Plug with Detachable Pipe
- Assembly Hardware (screws, nuts, wrench)
- Instruction Manual
Setup and Assembly
Follow these steps to assemble your VINGLI Patio Cooler Cart:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts are present against the package contents list.
- Assemble the Rolling Stand: Attach the legs to the bottom storage shelf and the top frame of the stand using the provided hardware. Ensure all connections are tight and secure.
- Attach Wheels: Secure the four wheels to the bottom of the stand. Ensure the two wheels with locking mechanisms are positioned on the same side for easier access.
- Install Bottle Opener and Cap Catcher: Mount the bottle opener and its accompanying cap catcher to the designated side of the cooler basin using the provided screws.
- Attach Lid Handles: Secure the two lid handles to the cooler lids.
- Place Cooler Basin on Stand: Carefully lift the cooler basin and place it onto the assembled rolling stand. The basin is designed to sit securely on the stand but is detachable for portability.
- Install Drain Pipe: Attach the detachable drain pipe to the drain hole at the bottom of the cooler basin. Ensure it is securely fastened to prevent leaks.
Image: The cooler basin can be detached from its rolling stand for easy transport, as shown being placed into a car trunk.
Operating Instructions
Filling the Cooler
- Open the dual-access lids.
- Place beverages or food items inside the cooler. The 60-quart capacity can hold up to 40 bottles or 75 cans.
- Add ice to keep contents chilled. The cooler is designed to keep drinks cool for up to 48 hours.
- Close the lids securely to maintain temperature.
Image: The cooler filled with ice and drinks, demonstrating its capacity and cooling capability.
Using the Bottle Opener
- Locate the built-in bottle opener on the side of the cooler.
- Place the bottle cap under the opener and apply upward pressure to remove the cap.
- Bottle caps will fall into the integrated cap catcher below the opener.
Image: Detail of the convenient built-in bottle opener and the cap catcher.
Mobility and Stability
- To move the cooler, ensure the wheel locks are disengaged.
- Push or pull the cooler using the side handles. The multi-directional wheels provide smooth mobility.
- Once in the desired location, engage the locks on the two lockable wheels to secure the cooler in place.
Image: The cooler cart being moved, highlighting the multi-directional wheels and the locking mechanism for stability.
Maintenance
Draining the Cooler
- After use, position the cooler near a suitable drainage area.
- Unscrew the drain plug located at the bottom of the cooler basin.
- Allow all melted ice and water to drain completely through the detachable pipe.
- Once drained, replace the drain plug securely.
Image: Detail of the drain hole and detachable pipe for easy water removal.
Cleaning and Storage
- Clean the interior and exterior of the cooler with mild soap and water. Rinse thoroughly.
- Ensure the cooler is completely dry before storing to prevent mold or mildew.
- Store the cooler in a cool, dry place, away from direct sunlight and extreme temperatures.
- If detaching the basin for storage, ensure both components are clean and dry.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooler not keeping items cold for stated duration. | Lids not fully closed; insufficient ice; cooler exposed to direct sunlight. | Ensure lids are tightly sealed. Add more ice. Position cooler in shade or indoors. |
| Water leaking from drain. | Drain plug not securely fastened; drain pipe improperly attached. | Tighten the drain plug. Re-attach the drain pipe, ensuring a snug fit. |
| Wheels not rolling smoothly or locking. | Debris in wheels; locking mechanism obstructed; wheels not properly installed. | Clean wheels of any debris. Check locking mechanism for obstructions. Verify wheels are correctly installed and tightened. |
| Cooler basin unstable on stand. | Basin not correctly seated; stand assembly loose. | Ensure the cooler basin is properly aligned and seated on the stand's frame. Check all stand assembly hardware for tightness. |
Specifications
| Feature | Detail |
|---|---|
| Brand | VINGLI |
| Model Name | cooler007 |
| Capacity | 60 Quarts (holds up to 40 bottles or 75 cans) |
| Material | Iron, Plastic |
| Product Dimensions (LxWxH) | 32.3"W x 16.9"D x 33.5"H |
| Special Features | Built-In Bottle Opener, Cap Catcher, Drain Hole, Insulated, Wheeled (2 lockable casters) |
| Cooling Performance | Keeps cool for up to 48 hours |
| Warming Performance | Keeps warm for up to 8 hours |
| Color | Black |
Image: Detailed dimensions of the VINGLI 60QT Rolling Cooler Cart.
Warranty Information
The VINGLI Patio Cooler Cart comes with a 1 Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or assistance with your VINGLI Patio Cooler Cart, please contact our customer support team:
- Email: support@vingli.com (Example email, replace with actual if available)
- Phone: 1-800-XXX-XXXX (Example phone, replace with actual if available)
- Website: Visit the VINGLI Store on Amazon for more product information and support resources.
When contacting support, please have your model number (cooler007) and purchase information ready.
