GOEBLESON W52XD05 Rechargeable Motion Sensor Ceiling Light with Remote

1. Introduction

Thank you for choosing the GOEBLESON W52XD05 Rechargeable Motion Sensor Ceiling Light. This wireless, battery-operated light offers convenient illumination with motion sensing capabilities, remote control, and adjustable brightness and color temperatures. Its magnetic design allows for easy installation and removal for charging. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Package Contents

Verify that all items listed below are included in your package:

• 2 x Motion Sensor Ceiling Lights
• 2 x Remote Controls
• 2 x USB-C Charging Cables
• 2 x Metal Plates
• 4 x Double-sided Adhesive Tapes
• Mounting Screws (quantity as needed for 2 lights)
• Instruction Manual

Image: Contents of the product package.

3. Charging the Light

Before initial use, fully charge the ceiling light. The light features a 6000mAh battery for extended use.

1. Locate the USB-C charging port on the side of the light.
2. Connect the provided USB-C cable to the light and a compatible USB power source (e.g., USB charger, power bank, computer USB port).
3. The charging indicator light will show red during charging and turn green when fully charged.
4. A full charge typically takes 5-6 hours.

Image: Charging status indicators and battery life information.

In sensor mode, a full charge can last 1 to 2 months. In steady-on mode, it lasts 7-13 hours, depending on brightness and frequency of use.

4. Installation

The GOEBLESON ceiling light offers versatile installation options without the need for wiring or drilling.

4.1 Magnetic Attachment (Recommended for easy removal)

1. Clean the desired mounting surface to ensure it is dry and free of dust.
2. Peel the protective film from one side of the double-sided adhesive tape and apply it to the metal plate.
3. Peel the protective film from the other side of the adhesive tape and firmly press the metal plate onto the ceiling or wall.
4. Align the magnetic back of the ceiling light with the installed metal plate until it securely attaches.

4.2 Screw Mounting (For permanent installation)

1. Mark the desired installation location on the ceiling or wall.
2. Use the included screws to secure the metal plate to the surface. If mounting on drywall, use appropriate anchors (not included, or use the provided ones carefully).
3. Align the magnetic back of the ceiling light with the installed metal plate until it securely attaches.

Image: Various installation methods for the ceiling light.

Note: When removing the light for charging, slide it sideways off the metal plate instead of pulling straight down to prevent dislodging the plate.

5. Operation

The light can be operated using the integrated buttons or the remote control.

5.1 On-Device Controls

The light features a light and motion sensor, along with two control buttons:

• Power Button: Long press to turn the light ON/OFF. Short press to cycle through 3 modes (Steady On, Day Mode, Night Mode).
• Brightness/Color Temperature Button: Short press to adjust color temperatures (Warm White, Neutral White, Cool White). Long press to adjust brightness levels (10%-100%).

Image: Close-up of the light's integrated controls and sensors.

5.2 Remote Control Functions

The included remote control provides full functionality for the light:

• ON/OFF: Turns the light on or off.
• Mode Selection: Buttons for Steady On Mode, Day Mode, and Night Mode.
• Color Temperature: Buttons for Warm White (3000K), Neutral White (4000K), and Cool White (6000K).
• Brightness Adjustment: Up and down arrows to adjust brightness from 10% to 100%.
• Timer Settings: Buttons to set the light to automatically turn off after 15, 30, or 60 minutes.

Image: Remote control layout and functions.

5.3 Motion Sensor Modes

The light features three motion sensor modes:

• Steady On Mode: The light remains continuously on.
• Day Mode: The light turns on automatically when motion is detected during the day.
• Night Mode: The light turns on automatically when motion is detected only in dark conditions.

In motion sensor modes, the light will automatically turn off after approximately 20 seconds of no detected motion.

Image: Motion sensor and constant light modes with timer options.

5.4 Adjustable Brightness and Color Temperatures

Customize your lighting experience:

• Color Temperatures: Choose between Warm White (3000K), Neutral White (4000K), and Cool White (6000K) to suit your preference or task.
• Brightness: Adjust the light intensity from 10% to 100% for optimal illumination.

Image: Adjusting color temperature and brightness with the remote.

6. Maintenance

To ensure the longevity and optimal performance of your ceiling light:

• Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Charging: Recharge the battery when the light output diminishes or the charging indicator signals low battery. Avoid fully depleting the battery for extended periods.
• Storage: If storing the light for an extended period, charge it fully every 3-6 months to maintain battery health.
• Environment: This product is designed for indoor use. Avoid exposure to excessive moisture or extreme temperatures.

7. Troubleshooting

If you encounter issues with your GOEBLESON ceiling light, refer to the following common solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty & Support

GOEBLESON products are designed for quality and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official GOEBLESON website. Please retain your proof of purchase for any warranty claims.