Bestway 2,500 Gallon Filter Pump (Model 2025) Instruction Manual

Product Overview

The Bestway 2,500 Gallon Filter Pump (Model 2025) is designed to provide efficient water circulation and filtration for above-ground swimming pools. This pump is compatible with pools ranging from 300 to 16,400 gallons and uses Type IV-B filter cartridges. It features an energy-saving timer for automatic shut-off, with a maximum run time of 10 hours.

This image displays the Bestway 2,500 Gallon Filter Pump, highlighting its dimensions (14.5 in height, 12 in width, 16.5 in depth), compatibility with 300-16,400 gallon above-ground pools, energy-saving plug with 10-hour max runtime, and a pump flow rate of 2,500 gallons per hour. It also indicates compatibility with Type IV-B filter cartridges.

Important Safety Information

• Read all instructions carefully before installation and use.
• Disconnect the pump from the power supply before performing any maintenance.
• Ensure the pump is placed on a solid, level surface.
• Do not operate the pump if the power cord or plug is damaged.
• Keep children away from the pump and pool area during operation.
• Consult a qualified electrician for any electrical installations.

Package Contents

Verify that all components are present before beginning installation.

• 1 x Bestway 2,500 Gallon Filter Pump
• 1 x Type IV-B Filter Cartridge
• Set of Adapters (compatible with 1.5-inch threaded valves and 1.25-inch valves)
• Hoses and Clamps (quantity may vary by model, typically 2 hoses for standard setup)

This image shows the Bestway 2,500 Gallon Filter Pump along with its white corrugated hoses, adapters, and clamps, laid out on a green surface, indicating the complete set of components.

A split image showing two different Bestway Flowclear filter pump models with their respective hoses and connection parts laid out on a green artificial grass surface. Diagrams in the top corners illustrate how the pumps connect to a pool.

Setup and Installation

1. Prepare the Installation Area

Choose a level, stable location for the filter pump, preferably on solid ground and close to the pool. Ensure the area is dry and protected from direct sunlight and moisture.

2. Connect Hoses to the Pump

Connect the corrugated hoses to the pump's inlet and outlet ports. Ensure all connections are secure to prevent leaks.

A person is shown connecting a white corrugated hose to the outlet port (labeled B in the video) of the Bestway filter pump, securing the connection with a threaded collar.

A person is shown connecting a white corrugated hose to the inlet port (labeled A in the video) of the Bestway filter pump, securing the connection with a threaded collar.

3. Connect Hoses to the Pool

Attach the other ends of the hoses to the corresponding inlet and outlet fittings on your above-ground pool. The pump's inlet hose connects to the pool's lower fitting (suction), and the outlet hose connects to the pool's upper fitting (return).

A hand is shown connecting a white corrugated hose to a grey return fitting on the side of an above-ground pool, ensuring a tight seal.

A hand is shown connecting a white corrugated hose to a grey suction fitting on the side of an above-ground pool, ensuring a tight seal.

4. Install Filter Cartridge

Open the filter pump's lid and insert the Type IV-B filter cartridge. Ensure it is seated correctly before closing and securing the lid.

A man is shown kneeling beside the Bestway filter pump, inserting a blue and white Type IV-B filter cartridge into the filter housing. The pump's lid is open next to him.

A close-up image of a new, pleated Type IV-B filter cartridge, white with blue end caps, ready for installation.

Operating Instructions

1. Prime the Pump

Before starting the pump, ensure the pool is filled with water and all air is purged from the system. Open the air release valve on top of the filter pump until water flows out, then close it.

The Bestway filter pump is shown in operation next to an above-ground pool, with hoses connected, illustrating its function in circulating and filtering pool water.

2. Power On and Set Timer

Plug the pump into a grounded electrical outlet. Use the energy-saving timer to set the desired operating duration, up to a maximum of 10 hours. The pump will automatically shut off after the set time.

Maintenance

1. Cleaning the Filter Cartridge

Regularly check and clean the filter cartridge. Turn off and unplug the pump. Open the filter housing, remove the cartridge, and rinse it thoroughly with a garden hose. Replace the cartridge if it remains dirty or damaged.

A man is shown removing the filter cartridge from the Bestway filter pump, a necessary step for cleaning or replacement.

2. Winterization

Before freezing temperatures, disconnect and drain the pump and hoses. Store all components in a dry, protected area.

Troubleshooting

Pump Not Starting

• Check power connection and circuit breaker.
• Ensure the timer is set correctly.
• Verify the on/off switch is in the "on" position.

Low Water Flow

• Clean or replace the filter cartridge.
• Check for blockages in hoses or pump inlet/outlet.
• Ensure the pump is properly primed and free of air.

Leaks

• Tighten all hose connections and clamps.
• Check O-rings and gaskets for proper seating and damage.

Specifications

Warranty Information

This Bestway product comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.

For additional protection, consider purchasing an extended protection plan:

• 3-Year Protection Plan
• 4-Year Protection Plan

Customer Support

For further assistance, technical support, or to order replacement parts, please contact Bestway customer service.

• Visit the official Bestway website: www.bestwaycorp.com
• Refer to the contact information provided in your product packaging.