JOINICE 43-inch Console Table with Drawers and Shelf (Model FUZB0010) - Instruction Manual

Introduction

This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your JOINICE 43-inch Console Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Proper assembly and care will ensure the longevity and stability of your furniture.

Safety Information

WARNING:

• Always assemble with at least two people to ensure safety and ease of construction.
• Do not overload the table. The maximum weight recommendation for the tabletop is 60 pounds. The bottom shelf has a maximum weight capacity of 22 pounds.
• Use the included anti-tipping device to secure the console table to a wall, preventing accidental tipping and potential injury.
• Keep all small parts and packaging materials away from children during assembly.

Package Contents

Before assembly, verify that all components and hardware listed below are present. If any parts are missing or damaged, please contact customer service.

Components:

• Top Panel (1)
• Side Panels (2, 3)
• Drawer Fronts (13, 14, 15)
• Drawer Sides (9, 10, 11)
• Drawer Bottoms (12)
• Bottom Shelf (7)
• Back Panel (5)
• Support Bars (6)
• Cross Braces (8, 17)
• Center Supports (4)
• Legs (integrated with side panels)
• Support Leg (16)

Hardware:

• Cam Bolts (A)
• Cam Locks (B)
• Metal Handles (C)
• Wood Dowels (D)
• Bolts (E)
• Screws (F, G, L)
• Washers (O)
• Drawer Slide Kits (CL, CR, DL, DR)
• Wall Anchors (M)

Note: Specific quantities for each hardware item are detailed in the assembly steps.

Assembly Instructions

Follow these step-by-step instructions carefully. A screwdriver is required for assembly. It is recommended to have two people for easier and safer assembly.

Assembly Video Guide:

Official assembly video for the JOINICE Console Table. This video provides a visual guide for each step of the assembly process.

Step-by-Step Guide:

1. Attach Drawer Slides to Side Panels:
   Insert Cam Bolts (A) into Side Panels (2) and (3). Attach Drawer Slide Kits (CL/CR) to panels (2) and (3) using Screws (F). Ensure correct orientation for left (CL) and right (CR) slides.
2. Assemble Main Frame (Part 1):
   Connect Side Panel (3) to Back Panel (5), Support Bar (6), and Bottom Shelf (7). Secure using Cam Locks (B) and Wood Dowels (D). Insert Support Leg (16) into the designated slot on the bottom shelf.
3. Assemble Main Frame (Part 2):
   Connect Side Panel (2) to Back Panel (5), Support Bar (6), and Bottom Shelf (7). Secure using Cam Locks (B) and Wood Dowels (D).
4. Install Center Supports:
   Attach Center Supports (4) to the main frame using Wood Dowels (D) and Screws (G). Ensure the drawer slide kits (CL/CR) are correctly aligned on these supports.
5. Attach Top Panel:
   Insert Cam Bolts (A) into the Top Panel (1). Carefully place the Top Panel (1) onto the assembled frame, aligning the cam bolts with the cam locks. Secure by tightening Cam Locks (B).
6. Install Cross Braces:
   Attach Cross Braces (8) and (17) to the lower section of the table frame using Screws (L) and Washers (O). These provide additional stability.
7. Assemble Drawer Boxes:
   Connect Drawer Sides (9, 10, 11) to form the drawer boxes. Secure using Screws (G). Repeat for all three drawers.
8. Attach Drawer Fronts and Handles:
   Attach Drawer Fronts (13, 14, 15) to the assembled drawer boxes. Secure Metal Handles (C) to the drawer fronts using Bolts (E). Insert Drawer Bottoms (12) into the grooves of the drawer boxes.
9. Attach Drawer Slides to Drawer Boxes:
   Attach Drawer Slide Kits (DL/DR) to the sides of the assembled drawer boxes using Screws (F). Ensure correct orientation for left (DL) and right (DR) slides.
10. Insert Drawers:
    Carefully slide the completed drawers into the console table frame, aligning the drawer slides.
11. Install Anti-Tipping Device:
    Attach the Wall Anchors (M) to the back of the console table using Screws (G). Secure the table to a wall using the provided wall anchors to prevent tipping. This step requires drilling holes in the wall.

Visual Aids for Assembly:

Operating Instructions

The JOINICE Console Table is designed for versatile use in various indoor settings such as entryways, living rooms, or hallways. Its three drawers provide enclosed storage for small items, while the open bottom shelf is suitable for displaying decorative items or storing larger belongings.

• Drawer Usage: Gently pull the bronze metal handles to open the drawers. The smooth sliding rails ensure easy access. Avoid forcing drawers open or closed.
• Shelf Usage: Place items evenly on the bottom shelf. Do not exceed the recommended weight capacity of 22 pounds for the shelf.
• Tabletop Usage: The tabletop can be used for displaying decor, lamps, or other items. Ensure the total weight on the tabletop does not exceed 60 pounds.

Maintenance

To maintain the appearance and longevity of your console table, follow these care instructions:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the distressed finish and wood veneer.
• Spills: Promptly wipe up any spills to prevent staining. The table is designed to be stain-resistant, but immediate cleaning is always recommended.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood finish.
• Heat and Moisture: Use coasters under hot or wet items to protect the tabletop surface.
• Inspection: Periodically check all screws and fittings to ensure they remain tight. Retighten as necessary.

Troubleshooting

If you encounter any issues with your console table, please refer to the following common solutions:

• Drawers Not Sliding Smoothly: Check that the drawer slides are correctly installed and free from obstructions. Ensure all screws on the slides are tightened.
• Table Wobbles: Verify that all cam locks and screws throughout the frame are securely tightened. Ensure the table is placed on a level surface. Adjust floor glides if present.
• Missing Parts or Assembly Issues: If you find any parts missing or experience difficulties during assembly, please contact JOINICE customer service for assistance.

Specifications

Warranty and Support

For any quality problems, assembly issues, or missing parts, please contact our dedicated customer service team. While specific warranty details are not provided in this manual, JOINICE is committed to customer satisfaction. Please refer to your purchase documentation or the retailer's website for any applicable warranty information.

Contact Information: Please visit the official JOINICE store on Amazon or the retailer's website for customer support contact details.