1. Introduction
Thank you for choosing the Kutchina Vento 90cm i-Autoclean Filterless Chimney. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new kitchen appliance. Please read it thoroughly before use and keep it for future reference.
The Kutchina Vento 90cm chimney is designed to effectively remove cooking fumes and odors, ensuring a fresh kitchen environment. It features intelligent dry autoclean technology, touch controls, and a wave sensor for convenient operation.
Image: Kutchina Vento 90cm Chimney in a kitchen setting, demonstrating its aesthetic integration.
2. Safety Instructions
Important: Read all instructions before installing or operating this appliance. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Ensure the electrical supply matches the voltage specified on the rating label.
- This appliance is for domestic use only. Do not use it for commercial purposes.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the oil collector properly installed.
- Never leave frying food unattended, as fats and oils can ignite.
- Clean the chimney regularly to prevent grease buildup, which can be a fire hazard.
- Keep children away from the appliance during operation and cleaning.
- Do not flambé under the range hood.
- Ensure adequate ventilation in the room when the range hood is used simultaneously with gas or other fuel-burning appliances.
- Disconnect the power supply before any cleaning or maintenance.
3. What's in the Box
Upon unpacking, please verify that all components are present and undamaged:
- Kutchina Vento Chimney Unit
- Installation Kit (mounting brackets, screws, etc.)
- User Manual
- Warranty Book
If any parts are missing or damaged, please contact Kutchina customer support immediately.
4. Specifications
Detailed technical specifications for the Kutchina Vento 90cm Chimney:
| Feature | Specification |
|---|---|
| Model Number | Vento |
| Brand | KUTCHINA |
| Product Dimensions (D x W x H) | 45D x 90W x 55.8H Centimeters |
| Weight | 16 Kilograms |
| Air Flow Capacity | 1400±50 m³/hr |
| Noise Level | 48 Decibels |
| Motor Wattage | 160 Watts (Copper Winded Motor) |
| Voltage | 220 Volts (AC) |
| Frequency | 50 Hz |
| Control Type | Touch Control, Wave Sensor |
| Number of Speeds | 3 |
| Special Features | i-Autoclean, Filterless Technology, LED Lighting, Oil Collector, Noise Reduction |
| Light Source | 2 x 1.25W LED Lamps |
| Mounting Type | Wall Mount |
| Material | Glass, Mild Steel |
| Finish Type | Powder Coated |
Image: Dimensional diagram of the Kutchina Vento 90cm Chimney, indicating its height, width, and depth.
Image: Infographic detailing key performance specifications such as motor wattage, suction capacity, noise level, and speed control.
5. Setup and Installation
The Kutchina Vento 90cm Chimney requires professional installation to ensure proper functioning and safety. Do not attempt to install the appliance yourself.
- Professional Installation: Installation and demonstration services are chargeable. Please register your installation request by calling 8066661111.
- Site Preparation: Ensure the installation area is suitable for a wall-mounted chimney, with appropriate electrical connections and ducting (if applicable).
- Additional Accessories: Any additional accessories not included in the standard package will be charged separately.
6. Operating Instructions
Your Kutchina Vento chimney is equipped with advanced touch controls and a wave sensor for ease of use.
Image: Demonstration of the wave sensor and touch controls, highlighting the intuitive interaction with the chimney.
6.1. Touch Control Panel
The control panel is located on the front of the chimney. It includes buttons for power, fan speed adjustment, light control, and autoclean function.
- Power Button: Press to turn the chimney ON or OFF.
- Fan Speed Control: Adjust the suction power through 3 available speeds (Low, Medium, High) to suit your cooking needs.
- Light Button: Activates or deactivates the integrated LED lamps to illuminate your cooking area.
- Autoclean Button: Initiates the i-Autoclean cycle (refer to Maintenance section for details).
6.2. Wave Sensor
The wave sensor allows for hands-free operation, enhancing convenience, especially when your hands are busy or soiled.
- Wave ON/OFF: Wave your hand across the sensor area to turn the chimney ON or OFF.
- Speed Adjustment: Subsequent waves may cycle through fan speeds (refer to specific model behavior in the full manual).
For optimal performance, activate the chimney a few minutes before you start cooking and let it run for some time after you finish to clear residual fumes.
7. Maintenance
Regular maintenance ensures the longevity and efficient performance of your Kutchina Vento chimney.
Image: Infographic illustrating the intelligent autoclean, oil collector, and filterless technology features of the chimney.
7.1. i-Autoclean Function
The intelligent dry autoclean technology automatically cleans the internal components of the chimney, preventing grease buildup and maintaining suction efficiency.
- Activating Autoclean: Press the dedicated Autoclean button on the control panel. The chimney will run a cleaning cycle.
- Frequency: It is recommended to run the autoclean cycle regularly, depending on your cooking frequency and type.
- Oil Collector: The autoclean process collects oil and grease in a removable oil collector. Ensure the oil collector is properly installed before running the cycle.
7.2. Cleaning the Oil Collector
- Removal: Carefully remove the oil collector from its housing.
- Cleaning: Wash the oil collector with warm, soapy water. Rinse thoroughly and dry completely before reinserting.
- Frequency: Empty and clean the oil collector regularly, typically once a week or as needed, depending on usage.
7.3. Exterior Cleaning
- Surface: Wipe the exterior surfaces of the chimney with a soft cloth dampened with mild detergent. Do not use abrasive cleaners or harsh chemicals.
- Glass Panel: Clean the glass panel with a glass cleaner and a soft cloth to avoid scratches.
- Before Cleaning: Always ensure the chimney is turned off and disconnected from the power supply before cleaning.
8. Troubleshooting
If you encounter any issues with your Kutchina Vento chimney, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney does not turn ON | No power supply; Power cord not properly connected; Fuse blown. | Check power outlet; Ensure power cord is securely plugged in; Check household fuse/circuit breaker. |
| Low suction power | Oil collector full or dirty; Obstruction in ducting; Fan speed too low. | Clean the oil collector; Check ducting for blockages (professional assistance may be required); Increase fan speed. |
| Unusual noise during operation | Loose components; Foreign object in fan; Motor issue. | Ensure all parts are secure; Turn off and inspect for foreign objects (disconnect power first); Contact customer support if motor noise persists. |
| LED lights not working | Bulb failure; Loose connection. | Check connections; Contact customer support for bulb replacement. |
| Wave sensor not responding | Sensor obstructed or dirty; Interference. | Clean the sensor area; Ensure no objects are blocking the sensor; Try operating with touch controls. |
If the problem persists after attempting these solutions, please contact Kutchina customer support.
9. Warranty and Support
Kutchina provides comprehensive warranty and support for your Vento 90cm Chimney.
- Product Warranty: 2 Years warranty on the product.
- Motor Warranty: Lifetime Warranty on the motor.
- Warranty Registration: Please refer to the included Warranty Book for detailed terms and conditions and registration procedures.
- Customer Support: For any service requests, technical assistance, or warranty claims, please contact Kutchina customer support at 8066661111.
- Manufacturer: Kutchina Home Makers Pvt Ltd, ZHONGSHAN, PRC, PIN-528200
- Importer: KUTCHINA HOME MAKERS PVT. LTD., 20, CHINAR PARK, RAJARHAT, GOPALPUR, KOLKATA - 700157