maXpeedingrods Class 3 Trailer Hitch Receiver Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your maXpeedingrods Class 3 Trailer Hitch Receiver. This product is designed to provide a reliable towing solution for your vehicle. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Figure 1: maXpeedingrods Class 3 Trailer Hitch Receiver and components.

2. Safety Information

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to property.

• Ensure the vehicle is parked on a level surface with the parking brake engaged before beginning installation.
• Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation.
• Do not exceed the Gross Trailer Weight (GTW) of 5000 LBS or the Tongue Weight (TW) of 750 LBS. These limits are also restricted by the lowest-rated towing component of your vehicle.
• Regularly inspect the hitch receiver for signs of wear, damage, or corrosion. Replace components as necessary.
• Ensure all bolts are properly torqued to the manufacturer's specifications. Re-check torque after the first 500 miles of towing and periodically thereafter.
• Consult your vehicle's owner's manual for specific towing capacities and recommendations.

3. Vehicle Fitment and Specifications

This maXpeedingrods Class 3 Trailer Hitch Receiver is specifically designed for the following vehicle models:

• Make: Subaru
• Model: Ascent All Styles
• Years: 2019, 2020, 2021, 2022, 2023, 2024

Figure 2: Vehicle Fitment for the Trailer Hitch Receiver.

Product Specifications:

Note: Towing capacities are limited to the lowest-rated towing component of your vehicle.

Figure 3: Towing Capacity Ratings.

Figure 4: Receiver Tube Size.

4. Package Contents

The maXpeedingrods Class 3 Trailer Hitch Receiver package includes the following components:

• 1 x Trailer Hitch Receiver
• All necessary installation hardware (bolts, washers, etc.)

Figure 5: Included Components.

5. Installation

The maXpeedingrods Class 3 Trailer Hitch Receiver features a bolt-on installation design. While installation kits are included, professional installation is recommended for optimal safety and performance.

General Installation Steps:

1. Park the vehicle on a flat, stable surface and engage the parking brake.
2. Consult your vehicle's service manual for specific instructions on accessing the frame mounting points and any necessary removal of existing components (e.g., exhaust hangers, bumper fascia).
3. Position the trailer hitch receiver against the vehicle's frame, aligning the mounting holes.
4. Insert the provided bolts and washers through the aligned holes.
5. Securely tighten all fasteners. Refer to your vehicle's manual or a professional mechanic for specific torque specifications.
6. Reinstall any components that were removed during the process.
7. Perform a final inspection to ensure the hitch is securely mounted and all connections are tight.

Figure 6: High-Quality Steel Construction.

6. Operation

Once installed, the 2-inch receiver opening can accept various towing accessories. Ensure that any accessory used is compatible with a 2-inch receiver and does not exceed the hitch's or your vehicle's towing capacities.

Compatible Accessories:

• Trailer hitch ball mounts
• Tow hooks
• Cargo carriers
• Bike carriers
• Weight distribution hitches
• Other 2-inch receiver hitch accessories

Figure 7: Wide Range of Applications.

7. Maintenance

Proper maintenance will extend the life of your trailer hitch receiver and ensure safe operation.

• Regular Inspection: Periodically inspect the hitch for any signs of rust, cracks, bends, or other damage. Pay close attention to weld points and mounting areas.
• Cleaning: Clean the hitch receiver regularly, especially after exposure to road salt, dirt, or harsh weather conditions. A mild soap and water solution is usually sufficient.
• Corrosion Protection: The hitch is powder-coated for corrosion resistance. If the coating is scratched or damaged, touch up with a rust-inhibiting paint to prevent corrosion.
• Fastener Check: Re-check the torque of all mounting bolts after the first 500 miles of towing and then annually or before long trips.

8. Troubleshooting

This section addresses common issues you might encounter with your trailer hitch receiver.

9. Warranty and Support

maXpeedingrods warrants its products against manufacturing defects under normal use for 1 year from the date of purchase. We also provide lifetime technical support and customer service.

For technical assistance, warranty claims, or any other inquiries, please contact maXpeedingrods customer service through their official channels or the retailer where the product was purchased.

For more information, visit the official maXpeedingrods store: maXpeedingrods Store