Aanyhoh Battery Operated Wall Sconces

Important Safety Information

Please read all instructions carefully before installation and use. Keep this manual for future reference.

• Battery Safety: This product uses a rechargeable lithium battery. Do not expose the battery to extreme temperatures, direct sunlight, or fire. Do not disassemble, puncture, or modify the battery. Use only the provided or recommended charging cable.
• Installation: Ensure the mounting surface is stable and can support the weight of the sconce. Do not install in areas with high humidity or direct water exposure unless specified.
• Cleaning: Disconnect power (if applicable) and use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• Disposal: Dispose of batteries and electronic components according to local regulations. Do not dispose of with household waste.
• Children and Pets: Keep the product and its components out of reach of children and pets to prevent accidental ingestion or injury.

Package Contents

Verify that all items listed below are included in your package:

• 2 x Aanyhoh Wall Sconces (Gold)
• 2 x Remote Controls
• 2 x USB to Type-C Charging Cables
• Mounting Hardware (screws, wall anchors)
• User Manual

Image: Contents of the Aanyhoh Wall Sconces package, showing two gold sconces, a remote, and a charging base.

Setup and Installation

The Aanyhoh Wall Sconces are designed for easy, wireless installation without the need for electrical wiring.

1. Charging the Battery

Before first use, fully charge the sconce's battery. The battery compartment is removable for convenient charging.

1. Gently slide out the battery compartment from the sconce base.
2. Connect the provided USB to Type-C charging cable to the Type-C port on the battery compartment.
3. Connect the USB end of the cable to a standard USB power adapter (not included) or a computer USB port.
4. The charging indicator light will show charging status (e.g., red for charging, green for fully charged).
5. A full charge takes approximately 3-4 hours. The 6000mAh battery provides over 15 hours of continuous light at highest brightness.
6. Once charged, reinsert the battery compartment into the sconce base, ensuring it clicks securely into place.

Image: Illustration of the removable battery compartment and the 350° rotation capability of the sconce.

2. Wall Mounting

These sconces are designed for simple wall mounting.

1. Choose a desired location on your wall. Ensure the surface is clean and dry.
2. Hold the sconce base against the wall at the desired height and mark the positions for the mounting screws.
3. Drill pilot holes at the marked positions. If mounting into drywall, insert the provided wall anchors.
4. Align the sconce base with the holes and secure it to the wall using the provided screws.
5. Ensure the sconce is firmly attached to the wall before use.

Operating Instructions

Your Aanyhoh Wall Sconce can be controlled via the included remote control or the integrated touch button.

1. Remote Control Functions

• Power ON/OFF: Press the ON or OFF button to turn the light on or off.
• Brightness Adjustment (10%-100%): Use the + and - buttons to increase or decrease brightness. Long press for stepless dimming.
• Color Temperature Adjustment (3000K-6000K): Use the WW (Warm White) and CW (Cool White) buttons to cycle through color temperatures (3000K, 4000K, 5000K, 6000K).
• Night Light Mode: Press the Moon icon button to activate a soft, non-blinding night light mode.
• Memory Function: The sconce will remember the last brightness and color temperature setting when turned off and on again.

Image: Visual representation of adjustable color temperature and brightness settings.

Image: The sconce operating in Night Light Mode, providing soft illumination.

2. Touch Control

The sconce features a discreet touch button on its base for basic control.

• Short Press: Tap the touch button to cycle through color temperatures (3000K, 4000K, 5000K, 6000K) and turn the light off.
• Long Press: Press and hold the touch button to adjust brightness steplessly (10%-100%). Release to set the desired brightness.

3. 350° Flexible Rotation

The light bar of the sconce can be rotated 350 degrees, allowing you to direct the light precisely where needed.

• Gently grasp the light bar and rotate it to your desired angle.
• This feature is ideal for reading, accent lighting, or task illumination.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Aanyhoh Wall Sconces.

• Cleaning: Use a soft, dry, lint-free cloth to wipe the surface of the sconce. Do not use liquid cleaners, sprays, or abrasive materials, as they may damage the finish or electronic components.
• Battery Care:
  • Recharge the battery when the light output becomes noticeably dim or when the low battery indicator (if present) activates.
  • Avoid completely draining the battery frequently, as this can reduce its lifespan.
  • If storing the sconce for an extended period, charge the battery to approximately 50% every 3-6 months to maintain battery health.
• Storage: Store the sconce in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter issues with your Aanyhoh Wall Sconce, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

Image: Key features of the Aanyhoh Wall Sconce compared to typical alternatives.

Image: Examples of the wall sconces in various applications within a home.

Image: Official Product Information Sheet. For more details, visit eprel.ec.europa.eu/qr/2412879.

Warranty and Support

Aanyhoh is committed to providing high-quality products. For warranty information, technical support, or any inquiries regarding your product, please contact our customer service team through the retailer's platform or the contact information provided with your purchase.

Please have your model number (XKFD-DC-JS) and purchase date ready when contacting support.