Irfora SATLINK WS6906 Digital Satellite Signal Finder Meter User Manual

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your Irfora SATLINK WS6906 Digital Satellite Signal Finder Meter. This device is designed to assist users in accurately aiming satellite dishes and verifying signal quality. It features a 3.5-inch LCD color display for real-time viewing and analysis of satellite signals.

2. Product Overview

The SATLINK WS6906 is a portable satellite signal finder equipped with a color LCD screen and an intuitive keypad. It integrates essential functions for satellite dish installation and signal verification.

Figure 2.1: SATLINK WS6906 device with included US plug power adapter.

2.1. Components and Connections

Familiarize yourself with the various parts and connection points of the device:

Figure 2.2: Detailed diagram illustrating the device's LNB input, AV OUT, AV IN ports, power switch, indicator lights, and keypad layout.

• LNB Input: Connects to the LNB (Low Noise Block) of your satellite dish.
• AV OUT: Allows connection to an external display (e.g., TV) to view the signal.
• AV IN: Enables connection of external media players or surveillance cameras for display on the device's screen.
• Power Switch: Controls the device's power.
• Indicator Lights: Provide visual feedback on power, LNB voltage (13V/18V), lock status, and charging status.
• Keypad: Used for menu navigation and function selection.

3. Package Contents

Please verify that all items listed below are included in your package:

Figure 3.1: The SATLINK WS6906 device shown alongside its protective carrying bag.

• 1 x SATLINK WS6906 Satellite Finder
• 1 x Black Protective Bag
• 1 x Strap
• 1 x USB Upgrade Cable
• 1 x Car Charging Adapter
• 1 x Power Adapter (US Plug)
• 1 x AV Cable
• 1 x English User Manual (this document)

4. Key Features

• 3.5-inch LCD color display for clear viewing.
• Facilitates easy and accurate satellite dish aiming.
• Allows viewing of free-to-air channels directly on the device.
• Provides sound warning prompts upon locking onto a satellite signal.
• Displays Bit Error Rate (BER) and Carrier to Noise (C/N) readouts.
• Supports simultaneous AV OUT and AV IN functions.
• Includes special "Parent Lock" functions for content control.
• Comes with a protective bag and car charger for enhanced portability and outdoor use.

5. Setup Guide

5.1. Charging the Device

Before initial use, fully charge the device's internal Li-ion battery (7.4V/4000mAh).

1. Connect the provided power adapter to the device's charging port.
2. Plug the power adapter into a standard AC 100-240V 50/60Hz wall outlet.
3. The 'Charge' indicator light will illuminate during charging. Once fully charged, the light may change color or turn off depending on the model.
4. For outdoor use, the car charging adapter can be used to charge the device from a vehicle's 12V power outlet.

5.2. Initial Connection for Satellite Finding

1. Ensure the device is powered off.
2. Connect the coaxial cable from your satellite dish's LNB to the 'LNB IN' port on the top of the SATLINK WS6906.
3. If connecting to an external display, use the provided AV cable to connect the 'AV OUT' port on the device to the 'AV IN' ports on your television or monitor.

5.3. Powering On

Toggle the 'Power' switch to the ON position. The device's LCD screen will power on, and the 'Power' indicator light will illuminate.

6. Operating Instructions

6.1. Satellite Signal Finding

The primary function of the WS6906 is to assist in locating and optimizing satellite signals.

Figure 6.1: The device provides a sound warning prompt when a satellite signal is successfully locked.

1. From the main menu, navigate to the 'Satellite Search' or 'Add Satellite' option using the arrow keys and 'OK' button.
2. Select the desired satellite from the pre-programmed list or manually enter satellite parameters (frequency, symbol rate, polarization, etc.).
3. Adjust your satellite dish's azimuth and elevation while observing the signal strength and quality indicators on the WS6906 screen.
4. A sound warning will activate when a strong signal is detected and locked, indicating successful alignment.
5. Fine-tune the dish position to achieve the highest possible signal quality (BER and C/N values).

6.2. Menu Navigation

Use the keypad for navigating the device's functions:

• MENU: Accesses the main menu.
• Arrow Keys (Up/Down/Left/Right): Navigate through menu options.
• OK: Confirms selections or enters sub-menus.
• EXIT: Returns to the previous screen or exits the menu.
• F1-F4: Function keys, their purpose may vary depending on the current screen.
• Numeric Keys (0-9): Used for entering values or selecting channels.
• SCAN: Initiates a channel scan on the selected satellite.
• SAT: Quickly switches between satellite lists or modes.
• INFO: Displays detailed information about the current channel or signal.

6.3. Viewing Free Channels

Once a satellite is locked and channels are scanned, you can view them directly on the device's screen.

Figure 6.2: The device allows direct viewing of free-to-air channels on its 3.5-inch LCD display.

1. After scanning, use the Up/Down arrow keys to browse through the available channels.
2. The selected channel will be displayed on the LCD screen.

6.4. AV Functions

• AV OUT: Connect the device to a larger screen (TV, monitor) using the AV cable to display the satellite signal or channels on the external screen.
• AV IN: Connect an external video source (e.g., DVD player, security camera) to the device's AV IN ports. Select the AV IN mode from the menu to view the external source on the WS6906 screen.

6.5. Parental Lock

The device includes a parental lock feature to restrict access to certain channels or menus. Refer to the on-screen menu for setting up and managing parental control options, typically found under 'System Settings' or 'Security'.

7. Maintenance

7.1. Cleaning

• Ensure the device is powered off and disconnected from all power sources before cleaning.
• Use a soft, dry cloth to wipe the exterior of the device.
• For the LCD screen, use a screen-specific cleaning solution and a microfiber cloth to avoid scratches.
• Do not use abrasive cleaners, solvents, or harsh chemicals.

7.2. Storage

• Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• When not in use, place the device in its protective bag to prevent dust and physical damage.
• If storing for extended periods, charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

7.3. Battery Care

• Avoid fully discharging the battery frequently.
• Use only the provided power adapter and car charger for charging.
• Do not expose the battery to high temperatures or puncture it.

8. Troubleshooting

If you encounter issues with your SATLINK WS6906, refer to the table below for common problems and their solutions.

Figure 8.1: Example of a 'no signal' scenario, which the WS6906 helps to resolve.

9. Technical Specifications

10. Warranty and Support

10.1. Warranty Information

Specific warranty details for the Irfora SATLINK WS6906 are typically provided at the point of purchase or within separate documentation. Please retain your proof of purchase for warranty claims. The warranty generally covers manufacturing defects under normal use conditions.

10.2. Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the retailer or manufacturer directly. Refer to the contact information provided with your purchase or visit the official Irfora website for support resources.