Pureit Wave Prime Mineral RO+MF 6-Stage 7L Wall Mount Water Purifier User Manual

1. Introduction

Thank you for choosing the Pureit Wave Prime Mineral RO+MF Water Purifier. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your water purifier. Please read it thoroughly before using the product and keep it for future reference.

The Pureit Wave Prime is designed to provide 100% purified RO water, enriched with essential minerals, ensuring safe drinking water for your household. It features a 6-stage purification process and a 7-liter storage capacity, suitable for various water sources including borewell, tanker, and municipal water.

2. Safety Information

• Ensure the water purifier is installed by a qualified technician.
• Do not attempt to open or repair the unit yourself. Contact authorized service personnel for assistance.
• Keep the appliance away from direct sunlight, heat sources, and corrosive chemicals.
• Ensure the power supply meets the specifications mentioned in this manual.
• Do not immerse the appliance in water or spray water directly onto it.
• Regularly check for leaks and address them immediately.
• Keep children away from the appliance during operation and maintenance.

3. Product Overview

Key Features:

• 6-Stage Purification: Utilizes RO+MF technology for comprehensive water purification.
• Mineral Enrichment: Enriches purified water with essential minerals like calcium and magnesium.
• 7-Liter Storage Capacity: Provides ample purified water storage.
• Versatile Water Source Compatibility: Suitable for borewell, tanker, and municipal water.
• WQA Tested: Certified for family safety.
• Long Filter Life: 6000-liter filter life with an internal sediment filter.

What's in the Box:

• Pureit Wave Prime Water Purifier Unit
• Installation Kit
• Handheld TDS Meter
• Warranty Card

Product Visuals:

4. Setup & Installation

The Pureit Wave Prime Water Purifier is designed for wall-mount installation. Due to the complexity of plumbing and electrical connections, professional installation is highly recommended to ensure proper functioning and to maintain warranty validity.

Installation Steps (Overview):

1. Site Selection: Choose a suitable wall location near a water inlet and an electrical outlet, ensuring sufficient space for maintenance.
2. Mounting: Securely mount the purifier unit to the wall using the provided installation kit.
3. Water Connection: Connect the raw water inlet to the purifier. Ensure all connections are tight to prevent leaks.
4. Drain Connection: Connect the reject water pipe to a suitable drain.
5. Electrical Connection: Plug the power cord into a grounded electrical outlet.
6. Initial Flush: Before first use, flush the system as per the detailed instructions provided by the installation technician to remove any manufacturing residues.

Refer to the detailed installation guide provided with your product or contact Pureit customer service for professional installation assistance.

5. Operating Instructions

First Use:

• After installation, ensure the power supply is connected and the water inlet valve is open.
• Allow the purifier to fill its storage tank. This may take some time during the initial fill.
• Dispense and discard the first few liters of purified water to ensure the system is thoroughly flushed.

Daily Operation:

• The purifier will automatically start purifying water when the water level in the storage tank drops.
• To dispense water, simply open the tap located at the bottom of the unit.
• Monitor any indicator lights on the unit (if present) for operational status or alerts.

6. Maintenance

Regular maintenance is crucial for the optimal performance and longevity of your Pureit Wave Prime water purifier.

Filter Replacement:

• The purifier features a 6000-liter filter life. The actual life may vary depending on the quality of the input water and usage.
• It is recommended to replace the filters as indicated by the service reminder or after approximately 6000 liters of purification.
• Contact authorized Pureit service personnel for filter replacement to ensure genuine parts and proper installation.

Cleaning:

• Exterior: Wipe the exterior of the purifier with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage Tank: Periodically clean the storage tank. This should ideally be done by a service technician during routine maintenance.
• Internal Sediment Filter: The unit includes an internal sediment filter. Its maintenance or replacement will be handled during scheduled service visits.

7. Troubleshooting

If you encounter any issues with your Pureit Wave Prime, refer to the following common troubleshooting tips. For complex problems, contact Pureit customer service.

8. Specifications

9. Warranty & Support

Your Pureit Wave Prime Water Purifier comes with a warranty. Please refer to the warranty card included in the box for detailed terms and conditions, including the warranty period and coverage.

For any service requests, technical assistance, or to purchase genuine spare parts and filters, please contact Pureit customer support. Ensure you have your product model number (WPWC500) and purchase details ready when contacting support.

Contact information for Pureit customer service can be found on your warranty card or on the official Pureit website.