MOMFANN Cordless Bath Jet Spa Instruction Manual

1. Introduction

The MOMFANN Cordless Bath Jet Spa is designed to enhance your bathing experience by providing a soothing hydro-massage. This portable device offers both jet and bubble modes with adjustable speeds, transforming your standard bathtub into a relaxing spa oasis. Please read this manual thoroughly before use to ensure safe and optimal operation.

Key Features:

• Spa-Like Relaxation: Enjoy hydro-massage with multidirectional jets and enveloping bubbles.
• Customizable Comfort: Choose between Flowing Jets (3 adjustable speeds) and Soft Bubbles modes.
• Cordless Design: Offers flexibility and eliminates the hassle of cords in the bathtub.
• Adaptable Tub Fit: Features 360° adjustable nozzles and a space-saving design for most standard tubs.
• Easy Maintenance: Includes a removable and washable filter.

2. Safety Instructions

To ensure safe operation and prevent damage, please adhere to the following safety guidelines:

• Always ensure the device is dry before use.
• Do not submerge the entire device in water beyond the recommended water level.
• Keep the device away from open flames and heat sources.
• Charge the device on a dry, flat surface.
• If the device becomes wet, do not attempt to use or charge it until it is completely dry.
• Ensure the water level stays between the minimum and maximum fill lines indicated on the device.
• Do not use if the device or charging cable appears damaged.
• Keep out of reach of children. Adult supervision is recommended during use.

3. Package Contents

Verify that all items are present in your package:

• MOMFANN Cordless Bath Jet Spa Device
• Suction Cup Mounting Bracket with Tether
• Magnetic Charging Cable
• Instruction Manual
• Replacement Filter (2 pieces)

Image: The MOMFANN Bath Jet Spa and its included accessories, such as the magnetic charger and spare filters.

4. Setup

4.1 Attaching the Device

1. Ensure the bathtub surface where you intend to attach the device is clean and dry.
2. Attach the suction cup mounting bracket firmly to the inner wall of your bathtub. Press down to ensure a secure seal.
3. Secure the device onto the mounting bracket. The tether provides additional security.

Image: The bath jet spa securely attached to the bathtub wall using its suction cup tether.

4.2 Filling the Bathtub

Fill your bathtub with water. Ensure the water level covers the device's nozzle and is between the 'MIN' and 'MAX' indicators on the device body. Do not operate the device without sufficient water.

5. Operating Instructions

5.1 Powering On/Off

Press and hold the power button (marked with a power symbol) on the device for a few seconds to turn it on or off. The LED indicators will light up when the device is active.

5.2 Selecting Modes (Jet/Bubble)

The device features a toggle switch to select between two modes: Flowing Jets and Soft Bubbles. Slide the switch to the desired mode. For the best bubble effect, add a small amount of bath soap before starting the bubble mode.

5.3 Adjusting Speed

Once a mode is selected, press the power button repeatedly to cycle through the three adjustable speed levels. The LED indicators will show the current speed setting.

5.4 Adjusting Nozzle Direction

The nozzle can be rotated 360° to direct the water flow to specific areas for targeted massage and relaxation.

Image: The control panel of the bath jet spa, showing the power button, speed indicators, and mode switch.

6. Charging

The MOMFANN Bath Jet Spa is equipped with a magnetic charging port for convenience and safety.

1. Ensure the device is completely dry before charging.
2. Connect the magnetic charging cable to the charging port on the device.
3. Plug the other end of the cable into a suitable power adapter.
4. The LED indicators will show the charging status. They will typically stop blinking or change color when fully charged.

Image: A detailed view of the bath jet spa, highlighting its magnetic charging port.

7. Maintenance

Regular cleaning ensures the longevity and optimal performance of your bath jet spa.

7.1 Cleaning the Filter

1. After each use, remove the device from the bathtub and turn it off.
2. Locate the removable filter at the water intake area.
3. Twist or pull to detach the filter.
4. Rinse the filter under running water to remove any hair, debris, or soap residue.
5. Ensure the filter is completely clean before reattaching it to the device.

Image: The bath jet spa with its removable filter detached for cleaning.

7.2 General Cleaning

Wipe the exterior of the device with a soft, damp cloth after each use. Do not use abrasive cleaners or solvents.

8. Troubleshooting

If you encounter any issues with your MOMFANN Cordless Bath Jet Spa, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. Connect it to the magnetic charger and allow sufficient time for charging.
• Weak jet/bubble flow: Check the water level in the bathtub to ensure it is within the recommended range. Clean the filter to remove any blockages.
• Device not sticking to the tub: Ensure the bathtub surface is clean and dry before attaching the suction cups. Press firmly to create a strong seal.
• Unusual noise: Turn off the device and check for any foreign objects obstructing the water intake or nozzle. Clean the filter.

If the problem persists, please contact customer support for further assistance.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MOMFANN website. Ensure to keep your proof of purchase for any warranty claims.