Maxell 723465 AA Alkaline Battery User Manual

1. Introduction

This manual provides essential information for the safe and effective use of Maxell 723465 AA Alkaline Batteries. These batteries are designed to deliver reliable 1.5V power for a wide range of electronic devices.

Maxell AA Alkaline batteries are engineered for long-lasting performance and are suitable for various household electronics such as wireless keyboards, computer mice, clocks, flashlights, toys, and remote controls. They are manufactured without mercury or cadmium, reflecting a commitment to environmental responsibility.

Image 1.1: Maxell AA Alkaline Battery 4-pack in its retail packaging.

2. Safety Information

Please read and follow these safety guidelines to prevent personal injury or damage to your devices.

• Do Not Recharge: These are primary alkaline batteries and are not designed to be recharged. Attempting to recharge them may cause leakage, fire, or explosion.
• Proper Polarity: Always insert batteries correctly, aligning the positive (+) and negative (-) terminals with the corresponding markings in your device. Incorrect insertion can cause damage.
• Do Not Dispose in Fire: Batteries may explode or leak if disposed of in fire.
• Keep Away from Children: Store batteries out of reach of small children to prevent accidental ingestion. If a battery is swallowed, seek immediate medical attention.
• Avoid Short Circuits: Do not short-circuit batteries by connecting the positive and negative terminals with metal objects. This can cause heat generation, leakage, or explosion.
• Do Not Mix Battery Types: Do not mix new and used batteries, or batteries of different types (e.g., alkaline with carbon-zinc or rechargeable). This can lead to leakage or reduced performance.
• Remove from Unused Devices: If a device will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
• Handle Leaking Batteries with Care: If a battery leaks, avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water and seek medical advice.

3. Setup and Installation

Installing Maxell AA Alkaline Batteries is a straightforward process. Follow these steps:

1. Identify the battery compartment on your electronic device. This is typically located on the back or bottom of the device.
2. Open the battery compartment cover. This may involve sliding a latch, pressing a button, or unscrewing a small screw.
3. Observe the polarity markings (+ and -) inside the battery compartment.
4. Insert the Maxell AA batteries, ensuring that the positive (+) end of the battery aligns with the positive (+) marking in the compartment, and the negative (-) end aligns with the negative (-) marking.
5. Close the battery compartment cover securely.

Image 3.1: A single Maxell AA Alkaline Battery, showing its side profile and terminals.

Image 3.2: A set of four Maxell AA Alkaline Batteries, illustrating their individual form factor.

4. Operating Instructions

Once installed, Maxell AA Alkaline Batteries provide consistent power to your devices. No special operating procedures are required for the batteries themselves; their function is to power the device they are installed in.

• Ensure your device is compatible with AA size alkaline batteries.
• Turn on your device as per its own instruction manual.
• Replace batteries when the device indicates low power or ceases to function correctly.

Image 4.1: Maxell AA Alkaline Batteries are suitable for a variety of common household electronics.

5. Maintenance and Storage

Proper maintenance and storage can help maximize the lifespan and performance of your Maxell AA Alkaline Batteries.

• Storage Conditions: Store unused batteries in their original packaging in a cool, dry place at room temperature. Extreme temperatures can affect battery performance and shelf life.
• Avoid Metal Contact: Do not store batteries loosely in a pocket or purse with metal objects like coins or keys, as this can cause a short circuit.
• Clean Contacts: Periodically clean battery contacts in devices and on the batteries themselves with a clean eraser or cotton swab to ensure good electrical connection.
• Check Expiration Date: Use batteries before their expiration date for optimal performance.

6. Troubleshooting

If your device is not functioning correctly with new Maxell AA Alkaline Batteries, consider the following troubleshooting steps:

• Check Polarity: Ensure batteries are inserted with the correct positive (+) and negative (-) orientation.
• Verify Battery Contacts: Make sure the battery contacts in the device and on the batteries are clean and free of corrosion. Gently scrape any visible corrosion.
• Test Batteries: If possible, test the batteries with a battery tester to confirm they have sufficient charge.
• Try Different Batteries: If the issue persists, try a different set of new batteries to rule out a faulty batch.
• Consult Device Manual: Refer to your device's instruction manual for specific troubleshooting related to its power source.

7. Specifications

Image 7.1: Visual representation of Maxell AA Alkaline Battery features.

8. Disposal Information

Proper disposal of used batteries is important for environmental protection.

• Do not dispose of batteries in household waste.
• Check local regulations for battery recycling and disposal options. Many communities have collection programs for alkaline batteries.
• For more information on recycling, contact your local waste management authority or visit relevant environmental protection agency websites.

9. Warranty and Support

For warranty information or technical support regarding your Maxell AA Alkaline Batteries, please refer to the official Maxell website or contact Maxell customer service directly. Contact details are typically available on the product packaging or the manufacturer's website.

Please retain your purchase receipt as proof of purchase for any warranty claims.