VOLT PLUS TECH MD06 Wireless PRO Bluetooth 5.3 Earbuds User Manual

Introduction

Thank you for choosing the VOLT PLUS TECH MD06 Wireless PRO Bluetooth 5.3 Earbuds. These earbuds are designed to provide a high-quality audio experience with advanced features such as Bluetooth 5.3 connectivity, CVC 8.0 intelligent noise reduction, and IPX4 water resistance. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

Package Contents

Figure 1: Package Contents

This image displays all items included in the product package. It features the VOLT PLUS TECH MD06 charging case with earbuds inside, a USB-C charging cable, two pairs of earbud tips (small and large), and the user manual.

• Wireless Charging Case
• VOLT PLUS TECH MD06 Wireless Earbuds (Left and Right)
• USB-C Charging Cable
• Two (2) Sizes of Earbud Tips (Small, Large)
• User Manual

Setup and Pairing

Follow these steps to set up and pair your earbuds with your device.

1. Initial Power On: Remove both earbuds from the charging case. They will automatically power on, indicated by a blue light. Alternatively, press and hold the touch area on each earbud for 3 seconds until the blue indicator light flashes.
2. Bluetooth Activation: On your mobile device (e.g., Samsung Galaxy A55), navigate to the Bluetooth settings and ensure Bluetooth is turned on.
3. Search for Device: Your device will scan for available Bluetooth devices. Look for "F9" in the list.
4. Connect: Select "F9" to pair and connect. Once connected, the earbuds will prompt "Connected".

Figure 2: Earbuds in Charging Case

This image shows the VOLT PLUS TECH MD06 earbuds resting inside their open charging case. The case features an LED display indicating battery levels for both the case and the individual earbuds, along with the "VOLT+ tech" brand logo.

Operating Instructions

Touch Controls

The VOLT PLUS TECH MD06 earbuds feature smart touch controls for easy management of calls and music playback.

Figure 3: Smart Touch Controls

This diagram visually explains the touch-sensitive controls on the earbuds. It shows that a single tap on either earbud answers or hangs up a call, a long press on the right earbud increases volume, a long press on the left earbud decreases volume, a single tap on either earbud plays or pauses music, a double tap on the right earbud skips forward, a double tap on the left earbud skips backward, and a triple tap activates the voice assistant (Siri/Android Mic).

• Answer/Hang Up Call: Press once (L/R earbud).
• Volume Up: Long press (R earbud).
• Volume Down: Long press (L earbud).
• Play/Pause Music: Press once (L/R earbud).
• Skip Forward: Press twice (R earbud).
• Skip Backward: Press twice (L earbud).
• Activate Voice Assistant (Siri/Android Mic): Press thrice (L/R earbud).

Charging the Earbuds and Case

The charging case features a 2000mAh battery, providing extended playback time and the ability to recharge your earbuds multiple times.

Figure 4: Charging and Playtime

This image illustrates the charging capabilities and battery life of the VOLT PLUS TECH MD06 earbuds and case. It indicates that a 10-minute charge provides 1 hour of playtime, with individual earbud performance shown as 7 hours of listening time and 5 hours of talk time. The charging case has a 2000mAh capacity.

• Charging Earbuds: Place the earbuds into the charging case. They will automatically begin charging. The LED display on the case will show the charging status and battery level of each earbud.
• Charging Case: Connect the provided USB-C cable to the charging port on the case and to a USB power source. The LED display will indicate the charging progress of the case.
• Power Bank Function: The charging case can also function as a power bank to charge other devices. Connect your device to the USB-A output port on the charging case using an appropriate cable (not included).

Figure 5: Power Bank Feature

This image illustrates the dual functionality of the charging case, which can also serve as a power bank. It shows the case connected to a smartphone, indicating its ability to charge external devices. The text highlights its 2000mAh capacity, suggesting it can recharge a phone approximately twice and the earbuds up to 10 times.

LED Display

The integrated LED display on the charging case provides clear information about the battery levels of both the charging case and the individual earbuds, allowing for better power management.

Maintenance

Water Resistance

The VOLT PLUS TECH MD06 earbuds are rated IPX4 water resistant, meaning they are protected against splashing water from any direction. This makes them suitable for daily use, including light rain and sweating during workouts.

Figure 6: IPX4 Water Resistance

This image visually represents the IPX4 water resistance of the VOLT PLUS TECH MD06 earbuds. The earbuds are shown amidst water splashes, emphasizing their ability to withstand rain and sweat, making them suitable for active use. Please note that the charging case is not waterproof.

Important Note: The charging case is not waterproof. Avoid exposing the charging case to water or excessive moisture.

Cleaning

• Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Ensure the charging contacts on both the earbuds and the case are clean and dry before charging.

Troubleshooting

If you encounter any issues with your VOLT PLUS TECH MD06 earbuds, please refer to the following common solutions:

• Earbuds not pairing: Ensure both earbuds are fully charged. Place them back in the case, close the lid, then open it again and try pairing from step 1 of the "Setup and Pairing" section. Make sure Bluetooth is enabled on your device and no other devices are connected to the earbuds.
• Only one earbud working: Try resetting the earbuds. Place both earbuds in the charging case, then remove them. If the issue persists, try re-pairing them with your device.
• No sound: Check the volume level on both your device and the earbuds. Ensure the earbuds are properly connected to your device.
• Charging issues: Verify that the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earbuds and inside the case are clean.
• Poor sound quality: Ensure the earbuds are properly seated in your ears. Try different sized ear tips for a better seal. Check for any obstructions in the earbud nozzles.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VOLT PLUS TECH website. Keep your proof of purchase for any warranty claims.