LIGE Men's Waterproof Chronograph Analog Quartz Watch User Manual

Introduction

Thank you for choosing the LIGE Men's Waterproof Chronograph Analog Quartz Watch. This manual provides detailed instructions on how to set up, operate, and maintain your watch to ensure its longevity and accurate performance. Please read this manual carefully before using your watch.

Image: Front view of the LIGE Men's Waterproof Chronograph Analog Quartz Watch with a black dial, gold-tone case, and black silicone strap.

Setup

Initial Battery Activation

Your LIGE watch is equipped with a high-quality Japanese quartz movement and a battery designed for a lifespan of up to two years. The watch should be ready for use upon arrival. If the watch is not running, gently pull out the crown to check if it was in the time-setting position during transit.

Setting Time and Date

1. Setting the Time:
   • Pull the crown out to position ② (farthest out).
   • Turn the crown to adjust the hour and minute hands to the correct time.
   • Once set, push the crown back into position ① (normal operating position).
2. Setting the Date:
   • Pull the crown out to position ① (first click).
   • Turn the crown clockwise or counter-clockwise to adjust the date.
   • Once set, push the crown back into the normal operating position.

Image: Diagram illustrating the crown positions for adjusting the calendar (date) and time, along with buttons for chronograph start/pause and reset.

Operating Instructions

Chronograph Function

Your LIGE watch features a fully functional chronograph for precise time measurement.

• Start/Pause: Press the top button (located at 2 o'clock position) to start the chronograph. Press it again to pause the measurement.
• Reset: While the chronograph is paused, press the bottom button (located at 4 o'clock position) to reset all chronograph hands to zero.

The chronograph sub-dials indicate:

• The sub-dial at 12 o'clock measures 1/1000 seconds.
• The sub-dial at 9 o'clock measures chronograph minutes.
• The sub-dial at 6 o'clock measures chronograph seconds.

Image: The LIGE Men's Watch displayed on a wrist, showcasing its size and appearance during wear.

Water Resistance

This watch is water-resistant up to 30 meters (3 ATM). This means it can withstand splashes, accidental rain, or sweat. It is not suitable for bathing, swimming, diving, or any activities involving prolonged submersion in water or high-pressure water jets. Always ensure the crown is fully pushed in before any contact with water.

Image: The LIGE Men's Watch shown with water splashes, visually representing its 30-meter water resistance.

Maintenance

Proper care will ensure your LIGE watch remains in excellent condition for years to come.

• Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth to remove dust and dirt. For the silicone strap, a damp cloth with mild soap can be used, then dry thoroughly.
• Avoid Chemicals: Do not expose the watch to harsh chemicals, solvents, or detergents, as these can damage the case, strap, or internal components.
• Temperature Extremes: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes, which can affect accuracy and seals.
• Magnetic Fields: Keep the watch away from strong magnetic fields, as they can interfere with the quartz movement's accuracy.
• Battery Replacement: The battery life is approximately two years. When the watch stops or the second hand starts skipping, it's time for a battery replacement. We recommend having this done by a professional watch repair service to maintain water resistance.

Troubleshooting

If you encounter any issues with your LIGE watch, please refer to the following common troubleshooting steps:

• Watch Not Running:
  • Check if the crown is fully pushed in.
  • The battery may need replacement if the watch has stopped completely after extended use.
• Incorrect Time/Date:
  • Refer to the "Setting Time and Date" section to re-adjust.
• Chronograph Not Functioning/Resetting:
  • Ensure the chronograph is not paused. Press the top button to start/pause, then the bottom button to reset.
  • If hands are misaligned after reset, a professional watchmaker may be able to re-calibrate them.
• Water Inside Watch:
  • Immediately take the watch to a professional watch repair service. Do not attempt to open it yourself.
• Loose Buttons/Strap Issues:
  • If any buttons or strap components become loose or detach, avoid further use and contact customer support for assistance.

For issues not covered here, or if troubleshooting does not resolve the problem, please contact LIGE customer support.

Specifications

Image: Diagram illustrating key product parameters including strap length, band width, dial diameter, dial thickness, weight, water resistance, band material, and case material.

Warranty and Support

LIGE is committed to your satisfaction. Your comfort is our top priority. If you encounter any application issues, our expert team is ready to assist you. For any quality-related concerns, we will provide a satisfactory solution.

The LIGE customer service team is available to assist you at any time. Please refer to your purchase documentation or the seller's platform for specific warranty terms and contact information.

For support, please contact the seller directly through the platform where you purchased the watch, or visit the official LIGE website for contact details.