1. Introduction
This manual provides essential information for the safe and effective use of your Onerbl AC-DC Adapter. This adapter is designed as a high-quality replacement power supply for specific Shark ION Robot 725 Series robotic vacuum cleaners. It enables you to power your device or charge its battery from standard electrical outlets.
The Onerbl AC-DC Adapter converts alternating current (AC) from your wall outlet into the direct current (DC) required by your compatible Shark ION Robot vacuum cleaner. It has been tested and validated to ensure compatibility and reliable performance.
2. Safety Information
- Indoor Use Only: This adapter is intended for indoor use in dry locations. Do not expose it to rain, moisture, or extreme temperatures.
- Proper Ventilation: Ensure the adapter has adequate ventilation during use. Do not cover it or place it in an enclosed space where heat cannot dissipate.
- Avoid Damage: Do not use the adapter if the cord or plug is damaged. Avoid bending, twisting, or pulling the cord excessively.
- Correct Voltage: Only plug the adapter into a wall outlet with the specified voltage range (AC 100-240V).
- Unplug When Not in Use: Disconnect the adapter from the power outlet when not in use for extended periods.
- Keep Away from Children: Store the adapter out of reach of children.
3. Package Contents
Verify that your package contains the following items:
- 1 x Onerbl AC-DC Adapter Unit
- 1 x AC Power Cord (for connecting to wall outlet)
Image 3.1: The Onerbl AC-DC Adapter unit shown with its detachable AC power cord and the DC output cable.
4. Setup Instructions
Follow these steps to set up your Onerbl AC-DC Adapter:
- Connect the AC Power Cord: Take the AC power cord (the cable with the two-prong plug on one end and a figure-8 connector on the other) and firmly insert the figure-8 connector into the corresponding port on the Onerbl AC-DC Adapter unit.
- Connect to Vacuum Cleaner: Plug the DC output connector (the round barrel connector at the end of the adapter's attached cable) into the charging port of your Shark ION Robot 725 Series vacuum cleaner. Ensure a secure connection.
- Plug into Wall Outlet: Insert the two-prong plug of the AC power cord into a standard, functional wall electrical outlet.
Image 4.1: The Onerbl AC-DC Adapter connected to a wall outlet, ready to power or charge a compatible device.
5. Operating Instructions
Once properly connected, the Onerbl AC-DC Adapter will begin to supply power to your Shark ION Robot vacuum cleaner. The adapter features an indicator light (typically blue) that illuminates when power is being supplied.
- Charging: If your vacuum cleaner's battery is low, the adapter will initiate the charging process. Refer to your Shark ION Robot's user manual for specific charging indicators and times.
- Direct Power: The adapter can also provide direct power to operate your vacuum cleaner if it supports operation while plugged in.
6. Troubleshooting
If you encounter issues with your Onerbl AC-DC Adapter, consider the following:
- No Power Indicator Light:
- Ensure the AC power cord is securely connected to both the adapter unit and the wall outlet.
- Verify that the wall outlet is functional by testing it with another device.
- Check for any visible damage to the adapter or cables. If damaged, discontinue use.
- Vacuum Cleaner Not Charging/Powering:
- Confirm the DC output connector is fully inserted into the vacuum cleaner's charging port.
- Ensure the adapter's indicator light is on, indicating it is receiving power.
- Consult your Shark ION Robot's manual for specific charging requirements or troubleshooting steps related to the vacuum itself.
- Adapter Feels Warm: It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot or emits a burning smell, immediately unplug it from the wall outlet and discontinue use. Ensure it has proper ventilation.
7. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | AC 100-240V, 50/61Hz (Worldwide AC Input) |
| Output Voltage/Current | Appropriate DC output for compatible devices (e.g., 14.8V for Shark ION Robot 725 Series) |
| Compatible Devices | Shark ION Robot 725 Series (RV725N, RV725_N, RV725) |
| Protections | Over Voltage Protection, Over Heat Protection |
Image 7.1: Diagram illustrating the approximate dimensions of the adapter unit and cable lengths.
Image 7.2: Close-up of the detachable AC power cord, featuring a standard two-prong plug and a figure-8 connector.
8. Warranty and Support
For warranty information or technical support regarding your Onerbl AC-DC Adapter, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt or order details handy for faster assistance.
