1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter 44-inch Brushed Nickel Indoor Ceiling Fan with LED Light and Pull Chain. This low-profile ceiling fan is designed to enhance your living space with its casual modern design and efficient air circulation.
Featuring a 44-inch blade span, this fan is suitable for smaller to medium-sized rooms such as bedrooms, dining rooms, offices, basements, and kitchens. It includes a three-speed WhisperWind motor for powerful yet quiet performance and an integrated LED light kit for illumination.
Image 1.1: Hunter 44-inch Brushed Nickel Ceiling Fan showcasing its key features including pull chain, LED bulbs, indoor use, SureSpeed technology, and WhisperWind motor.
Image 1.2: The Hunter ceiling fan installed in a room, demonstrating its low-profile design and aesthetic integration.
2. Safety Information
Read all instructions carefully before beginning installation. Failure to follow these instructions could result in electric shock, fire, or personal injury.
- Electrical Safety: Ensure the power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
- Mounting: The fan must be mounted to a structurally sound ceiling joist or outlet box capable of supporting the fan's weight (approximately 16.1 lbs). Use only outlet boxes marked 'Acceptable for Fan Support'.
- Blade Clearance: Ensure there is adequate clearance from the fan blades to any walls or obstructions. The lowest point of the fan blades must be at least 7 feet (2.13 meters) from the floor.
- Moving Parts: Avoid placing objects in the path of the fan blades. Do not operate the fan if blades are damaged or bent.
- Light Kit: Do not attempt to replace LED bulbs. The LED light kit is designed for long-lasting performance. If the light fails, contact customer support.
- Cleaning: Always disconnect power before cleaning the fan. Use a soft, damp cloth; never use abrasive cleaners.
3. Package Contents
Carefully unpack your ceiling fan and inspect the contents to ensure all parts are present and undamaged. Refer to the list below:
- 1 Motor Assembly
- 3 Fan Blades
- 1 Light Kit Assembly
- 2 LED Bulbs (integrated into light kit)
- 1 Pull Chain Set
- Hardware Pack (screws, washers, wire nuts, etc.)
4. Setup & Installation
This section outlines the general steps for installing your Hunter ceiling fan. For detailed diagrams and specific wiring instructions, please refer to the separate installation guide included in your product packaging.
4.1. Pre-Installation
- Turn off Power: Ensure power is disconnected at the circuit breaker.
- Prepare Mounting Location: This low-profile fan is ideal for rooms with ceilings 8 feet or less. Install the mounting bracket to a secure ceiling joist or an approved fan support outlet box.
4.2. Fan Assembly
- Attach Blades: Secure the three fan blades to the motor housing using the provided screws. Ensure they are firmly attached.
- Install Light Kit: Connect the light kit wiring to the fan motor wiring as per the wiring diagram. Secure the light kit assembly to the bottom of the fan motor housing.
- Install Glass Shade: Carefully attach the premium painted cased white glass shade to the light kit.
- Attach Pull Chains: Thread the pull chains through the designated openings in the light kit and fan housing.
4.3. Mounting the Fan
- Wire Connections: Connect the fan's electrical wires to the household wiring according to the wiring diagram. Use the provided wire nuts and ensure all connections are secure.
- Secure Fan to Mounting Bracket: Lift the fan assembly and carefully attach it to the mounting bracket, ensuring all safety screws are tightened.
Image 4.1: Fan Dimensions. A: 9.94 inches (height from ceiling to bottom of motor housing), B: 14.06 inches (total height from ceiling to bottom of light kit).
5. Operating Instructions
Your Hunter ceiling fan is designed for simple operation using the integrated pull chains.
5.1. Fan Speed Control
The fan features a 3-speed WhisperWind reversible motor. One pull chain controls the fan speed:
- First Pull: High Speed
- Second Pull: Medium Speed
- Third Pull: Low Speed
- Fourth Pull: Off
5.2. Light Control
The second pull chain controls the integrated LED light kit:
- First Pull: Light On
- Second Pull: Light Off
5.3. Reversible Rotation
The fan motor is reversible, allowing for both downdraft (cooling) and updraft (air circulation) modes. A switch on the motor housing controls the direction of rotation. For cooling, set the switch to downdraft (blades rotate counter-clockwise). For circulating warm air in winter, set the switch to updraft (blades rotate clockwise). Always turn off the fan and wait for the blades to stop completely before changing the direction switch.
Image 5.1: Detail of the fan's LED light kit and the two pull chains for fan speed and light control.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
6.1. Cleaning
- Frequency: Clean your fan periodically to prevent dust buildup.
- Procedure: Always turn off the power at the circuit breaker before cleaning. Use a soft, lint-free cloth to wipe down the fan blades, motor housing, and light kit. A slightly damp cloth can be used for stubborn dirt, but ensure no moisture enters the motor or electrical components.
- Avoid: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
6.2. Blade Inspection
- Periodically check the blade screws to ensure they are tight. Loose screws can cause wobbling and noise.
- Inspect blades for any cracks or damage. Damaged blades should be replaced to maintain balance and safety.
6.3. Electrical Connections
- Annually, with the power off, check all electrical connections for tightness.
7. Troubleshooting
Before attempting any repairs, ensure the power is turned off at the circuit breaker.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan Loose wire connections Motor switch in wrong position | Check circuit breaker/fuse Verify all wire connections are secure Ensure the motor direction switch is fully engaged in either up or down position |
| Light does not work | Loose wire connections Faulty LED light kit | Check light kit wiring connections Contact customer support for light kit replacement (LEDs are not user-replaceable) |
| Fan wobbles | Loose blade screws Unbalanced blades Loose mounting bracket | Tighten all blade screws Ensure blades are not bent or damaged. Use a balancing kit if necessary. Verify mounting bracket is securely fastened to the ceiling. |
| Noisy operation | Loose screws Motor hum Blades hitting an obstruction | Check and tighten all screws on the fan body and blades. Some motor hum is normal, especially at lower speeds. Ensure all components are secure. Check for any objects in the fan's path. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Hunter |
| Model Number | CC5C27C64 |
| Color | Brushed Nickel |
| Product Dimensions (D x W x H) | 44" x 44" x 14.06" |
| Item Weight | 16.1 Pounds |
| Number of Blades | 3 |
| Blade Material | Engineered Wood |
| Power Source | AC |
| Voltage | 120 Volts |
| Wattage | 14 watts (fan only) |
| Air Flow Capacity | 2477 Cubic Feet Per Minute |
| Noise Level | 45 Decibels |
| Number of Speeds | 3 |
| Control Type | Pull Chain Control |
| Room Type | Bedroom, Kitchen, Laundry Room, Office |
| Special Features | AC Motor, Non Dimmable, LED Light, Reversible Rotation, SureSpeed® Guarantee, Twist & Lock Shade, Variable Speed |
| Indoor/Outdoor Usage | Indoor |
| Certification | ETL Listed |
| UPC | 840214743139 |
Image 8.1: EnergyGuide label showing estimated yearly energy cost and airflow capacity.
9. Warranty & Support
This product is sold as a renewed item. Warranty terms for renewed products may vary from new products. Please refer to the specific warranty information provided at the time of purchase or contact the seller directly for details regarding your product's warranty coverage.
For technical assistance, troubleshooting not covered in this manual, or inquiries about replacement parts, please contact Hunter Fan customer support. Have your model number (CC5C27C64) and purchase information ready when contacting support.
Manufacturer: Hunter Fan
