ASUS NUC 13 Pro Tall Barebone User Manual

1. Introduction

This manual provides essential information for setting up, operating, and maintaining your ASUS NUC 13 Pro Tall Barebone mini PC. This device is designed for various computing tasks, offering a compact form factor with robust connectivity and expandability. As a barebone system, it requires the installation of RAM and storage components before use.

Image 1.1: Front view of the ASUS NUC 13 Pro Tall Barebone. It features two USB 3.2 ports, a 3.5mm headphone/microphone jack, and a power button on the front panel.

2. Package Contents

Verify that all items are present in the package:

• ASUS NUC 13 Pro Tall Barebone Unit (Model: RNUC13ANHI30000UI)
• VESA Mount Kit
• AC Adapter
• Power Cord
• User Manual (this document)

3. Hardware Installation (Barebone System)

The ASUS NUC 13 Pro Tall Barebone requires user-supplied RAM and storage devices. Ensure the system is powered off and disconnected from the power source before performing any hardware installation.

3.1. Installing RAM (DDR4 SO-DIMM)

1. Unscrew the bottom cover of the NUC unit.
2. Locate the SO-DIMM slots on the motherboard.
3. Gently insert the DDR4 SO-DIMM module into the slot at a 45-degree angle.
4. Press down until the retention clips snap into place, securing the module.
5. Repeat for the second module if installing dual-channel memory.

3.2. Installing M.2 SSD

1. Locate the M.2 slot on the motherboard.
2. Remove the screw or standoff from the M.2 slot.
3. Insert the M.2 SSD into the slot at an angle.
4. Gently push down the SSD and secure it with the screw or standoff.

3.3. Installing 2.5-inch SATA Drive

The Tall barebone model supports a 2.5-inch SATA drive.

1. Locate the 2.5-inch drive bay and SATA connector inside the chassis.
2. Secure the 2.5-inch drive into the bay using the provided screws.
3. Connect the SATA data and power cables to the drive and the motherboard.

3.4. Reassembling the Unit

1. Carefully replace the bottom cover.
2. Secure the bottom cover with the screws removed earlier.

4. Connecting Peripherals

Connect your display, keyboard, mouse, and other necessary devices.

Image 4.1: Front panel connectivity. Features include two USB 3.2 ports, a 3.5mm headphone/microphone jack, and the power button.

Image 4.2: Rear panel connectivity. Ports include DC-in, two Thunderbolt™ 4 (USB-C), 2.5G RJ45 LAN, two USB 3.2, two USB 2.0, and two HDMI 2.1 ports.

• Display: Connect your monitor(s) to the HDMI 2.1 ports or Thunderbolt™ 4 (USB-C) ports. The NUC supports up to one 8K or quad 4K@60Hz displays.
• USB Devices: Connect your keyboard, mouse, and other USB devices to the available USB 3.2 or USB 2.0 ports.
• Network: Connect an Ethernet cable to the 2.5G RJ45 LAN port for wired network access, or use the integrated Wi-Fi 6E for wireless connectivity.
• Audio: Use the 3.5mm headphone/microphone jack on the front panel for audio input/output.
• Power: Connect the AC adapter to the DC-in port and then to a power outlet.

4.1. VESA Mount Installation

The included VESA mount allows you to attach the NUC to the back of a compatible monitor or to a wall.

1. Attach the VESA bracket to the back of your monitor or desired surface using the provided screws.
2. Slide the NUC unit onto the VESA bracket until it clicks securely into place.

5. Operating Instructions

5.1. First Boot and BIOS Setup

1. After connecting all peripherals and power, press the power button on the front panel.
2. To enter the BIOS/UEFI setup, repeatedly press the Delete or F2 key during startup.
3. Configure boot order, system time, and other settings as needed. Save changes and exit BIOS.

5.2. Operating System Installation

The NUC 13 Pro supports Windows 11. You will need a bootable USB drive with your preferred operating system installer.

1. Insert the bootable USB drive into a USB port.
2. Power on the NUC and enter the BIOS/UEFI setup (refer to Section 5.1).
3. Set the boot priority to the USB drive or select it from the boot menu.
4. Follow the on-screen instructions to install the operating system.

5.3. Driver Installation

After OS installation, install the necessary drivers for optimal performance. Drivers can typically be found on the ASUS support website for your specific model.

• Chipset Drivers
• Graphics Drivers (Intel UHD Graphics)
• Network Drivers (LAN, Wi-Fi, Bluetooth)
• Thunderbolt Drivers
• Audio Drivers

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your NUC.

6.1. Cleaning

• Regularly clean the exterior with a soft, dry cloth.
• Use compressed air to clear dust from ventilation grilles and ports. Ensure the system is powered off before cleaning.
• Avoid liquid cleaners directly on the unit.

6.2. Software Updates

• Keep your operating system updated with the latest security patches and feature improvements.
• Regularly check the ASUS support website for updated BIOS and driver versions.

6.3. Environmental Considerations

• Operate the NUC in a well-ventilated area to prevent overheating.
• Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight.

Image 6.1: Side view of the NUC 13 Pro, showing the ventilation grille and Kensington lock slot for physical security.

7. Troubleshooting

This section addresses common issues you might encounter.

7.1. No Power

• Ensure the AC adapter is securely connected to the NUC and a working power outlet.
• Verify the power cord is properly connected to the AC adapter.
• Test the power outlet with another device.

7.2. No Display Output

• Check that the monitor is powered on and the display cable (HDMI or USB-C) is securely connected to both the NUC and the monitor.
• Try a different display cable or monitor if available.
• Ensure the correct input source is selected on your monitor.
• If multiple displays are connected, try connecting only one.

7.3. System Overheating

• Ensure the NUC is placed in a location with adequate airflow and that ventilation grilles are not obstructed.
• Clean any dust from the ventilation grilles using compressed air.
• Verify that the internal fan is operating correctly.

7.4. Operating System Issues

• If the OS fails to boot, try accessing the BIOS/UEFI setup to check boot device priority.
• Consider reinstalling the operating system if software corruption is suspected.
• Ensure all drivers are correctly installed and updated.

8. Specifications

Key technical specifications for the ASUS NUC 13 Pro Tall Barebone (RNUC13ANHI30000UI).

9. Warranty Information

ASUS products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official ASUS support website. Keep your proof of purchase for warranty claims.

10. Support

For technical assistance, driver downloads, or further information, please visit the official ASUS support website:

www.asus.com/support/

You may also contact ASUS customer service directly through the contact information provided on their support portal.