MOUSETRO Smart Lock (Model ZN-S01) Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, setup, and operation of your MOUSETRO Smart Lock, Model ZN-S01. This 4-in-1 keyless entry door lock offers multiple access methods including passcode, app control, IC key fob, and a traditional mechanical key, designed to enhance the security and convenience of your home or office.

2. Safety Information

• Read all instructions carefully before installation and use.
• Do not attempt to disassemble or modify the lock. This may void the warranty and compromise security.
• Use only 4 AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a secure location outside the property to prevent lockout in case of electronic failure or dead batteries.
• Ensure the door is properly aligned and closes smoothly before installing the lock to prevent operational issues.

3. Package Contents

Verify that all components are present before beginning installation:

• Smart Door Lock Panels (Front and Rear)
• Lock Body & Accessories
• Fobs & Keys (IC Key Fobs and Mechanical Keys)
• Hole Drawing & Manual
• Batteries (4 AA Alkaline)

4. Product Overview

The MOUSETRO Smart Lock ZN-S01 consists of an exterior keypad assembly and an interior battery/thumb-turn assembly, along with the deadbolt mechanism.

Image: Front view of the MOUSETRO Smart Lock ZN-S01 and its corresponding mobile application interface.

Key Features:

• Multiple Access Methods: Passcode, App, IC Key Fob, Mechanical Key.
• Intelligent Management: Supports up to 250 access codes, generates one-time and permanent codes, and tracks unlock records via the app.
• Enhanced Security: Features auto-lock (1-180 seconds), one-touch locking, privacy mode, passage mode, anti-peeping, and anti-hacking touchscreen keypad.
• Long Battery Life: Operates for approximately 6 months to a year on 4 AA batteries (8000 openings).
• Emergency Power: Equipped with a Type-C emergency port for backup power if batteries are depleted.

5. Setup and Installation

The MOUSETRO Smart Lock is designed for easy DIY installation, typically requiring only a screwdriver. No additional drilling is needed for standard door preparations.

Door Compatibility:

• Fits doors between 1.38 inches (35mm) and 1.97 inches (50mm) thick.
• Suitable for both left-handed and right-handed doors. The lock direction can be adjusted in the app after installation.

Image: Diagram illustrating compatible door dimensions and lock component measurements.

Installation Steps:

1. Prepare the Door: Ensure your door has a standard deadbolt preparation. Remove any existing deadbolt hardware.
2. Install the Latch: Insert the deadbolt latch into the door edge. Ensure the latch bolt is facing the correct direction for your door swing.
3. Install the Exterior Assembly: Place the exterior keypad assembly onto the door, aligning the spindle through the latch mechanism.
4. Install the Interior Assembly: Connect the cable from the exterior assembly to the interior assembly. Secure the interior assembly to the door using the provided screws.
5. Install Batteries: Insert 4 AA alkaline batteries into the battery compartment of the interior assembly.
6. Test Operation: Manually test the lock with a mechanical key and the thumb-turn to ensure smooth operation.
7. Set Door Handing: After initial power-up, the lock will prompt you to set the door handing (left or right). Follow the instructions in the app or on the lock.

Image: Visual guide for adjusting the door lock direction for both left-opening and right-opening doors via the mobile application settings.

6. Operating Instructions

6.1 Unlocking Methods

Image: Illustration of the four primary methods to unlock the MOUSETRO Smart Lock: using the mobile app, entering a passcode on the keypad, scanning an IC key fob, or using a traditional mechanical key.

A. Passcode Entry

• Touch the keypad to activate.
• Enter your 6-8 digit passcode followed by the '#' key.
• The lock will unlock with an audible confirmation.
• Anti-Peeping Function: You can enter random digits before or after your actual passcode to prevent others from guessing your code. For example, XXX + Passcode + XXX + #.

Image: A hand entering a passcode on the smart lock keypad, demonstrating the anti-peeping feature where extra digits can be added before or after the correct code.

B. App Control (Bluetooth)

• Download the designated smart lock application (e.g., Tuya Smart or Smart Life) from your app store.
• Follow the in-app instructions to pair your smartphone with the lock via Bluetooth.
• Within Bluetooth range, you can unlock the door directly from the app interface.
• The app allows for user management, code generation, and viewing unlock records.

Image: A smartphone screen showing the smart lock application, highlighting options for temporary unlock codes and member management.

C. IC Key Fob

• Present the registered IC key fob to the designated sensor area on the lock's keypad.
• The lock will unlock automatically.

D. Mechanical Key

• Insert the mechanical key into the keyhole located on the exterior assembly.
• Turn the key to unlock the deadbolt. This method is for emergency access or when batteries are depleted.

6.2 Locking Methods

A. Auto-Lock

• The lock can be configured to automatically lock after a set period (1-180 seconds) once the door is closed.
• Adjust the auto-lock delay setting within the mobile application.

B. One-Touch Locking

• Press and hold the '#' key on the keypad for 2 seconds to manually lock the door from the outside.

Image: A woman demonstrating the convenience of the smart lock's auto-lock and one-touch locking features.

C. Privacy Mode

• Activate privacy mode from the interior assembly or via the app. This prevents unlocking from the outside using passcodes or key fobs, enhancing indoor security.

D. Passage Mode

• Enable passage mode via the app. In this mode, the lock will remain in an unlocked state until it is manually locked, suitable for high-traffic periods.

Image: Two individuals moving a large item through a doorway, illustrating the utility of passage mode where the smart lock remains unlocked.

6.3 Advanced Features

A. Remote Control / Wi-Fi Access (Gateway Required)

• To enable remote lock/unlock functionality and remote code setup from anywhere, a MOUSETRO Wi-Fi Gateway (sold separately) is required.
• Pair the smart lock with the gateway, and connect the gateway to your home Wi-Fi network.

Image: A man on a phone call remotely generating a one-time passcode for a visitor at his smart-locked door, demonstrating remote access capabilities with a Wi-Fi gateway.

B. User Management

• The app allows you to add, modify, or delete user access codes and IC key fobs.
• Generate one-time, timed, or permanent passcodes for guests, service providers, or family members.

Image: A delivery person receiving a one-time passcode on their phone, enabling temporary access to a smart-locked property.

7. Maintenance

7.1 Battery Replacement

• The lock will provide a low battery alert when power is running low.
• Replace all 4 AA alkaline batteries promptly to ensure continuous operation.
• To replace, remove the battery cover on the interior assembly, replace old batteries with new ones, and reattach the cover.

Image: The smart lock displaying a low battery warning (15%) and highlighting the Type-C emergency port for temporary power supply.

7.2 Cleaning

• Wipe the lock's surface with a soft, damp cloth.
• Avoid using abrasive cleaners or solvents, which can damage the finish and electronic components.

8. Troubleshooting

• App cannot find or connect to the lock: Reset the lock and attempt pairing again. Ensure Bluetooth is enabled on your device and you are within range.
• Lock not responding: Check battery levels. If batteries are depleted, use the mechanical key or connect a power bank to the Type-C emergency port for temporary power.
• Incorrect password attempts: After 5 incorrect password attempts, the keypad will be locked for 90 seconds as an automatic security measure. Wait for the lockout period to expire before trying again.

Image: Visual representation of the automatic locking protection feature, which activates after five consecutive incorrect password entries.

Resetting the Lock:

If persistent issues occur, a factory reset may be necessary. Refer to the detailed instructions in the included 'Hole Drawing & Manual' for the specific reset procedure for your model. Resetting the lock will clear all cached information, including user codes and settings.

Image: A user performing a reset on the smart lock using a small pin tool, which clears all stored data.

9. Specifications

10. Warranty and Support

Warranty Information:

• The MOUSETRO Smart Lock comes with a 1-year product warranty from the date of purchase.
• A 30-day money-back guarantee is also provided.

After-Sales Support:

• MOUSETRO offers lifetime after-sales support for this product.
• For technical assistance, troubleshooting, or warranty claims, please contact MOUSETRO customer service through the contact information provided with your purchase or on the official MOUSETRO website.

Optional Protection Plans:

Extended protection plans may be available for purchase separately:

• 3-Year Protection Plan
• 4-Year Protection Plan
• Complete Protect (monthly billing option)

Please refer to the specific terms and conditions of these protection plans for full details.