Soundcore A31X1

Download PDF
Contents

Soundcore Select 4 Go Bluetooth Shower Speaker User Manual

Model: A31X1

Product Overview

The Soundcore Select 4 Go is a portable Bluetooth speaker designed for robust outdoor and indoor use, featuring IP67 waterproof and dustproof protection, extended battery life, and powerful sound output. Its compact design and built-in strap enhance portability, making it suitable for various activities.

Soundcore Select 4 Go Bluetooth Shower Speaker

Image: The Soundcore Select 4 Go speaker in black, showcasing its compact design and integrated strap.

What's in the Box

  • Soundcore Select 4 Go Bluetooth Shower Speaker
  • 30cm USB-A to C cable
  • Safety card & Quick Start Guide
  • Note: Wall charger not included.
Contents of the Soundcore Select 4 Go box

Image: A visual representation of the Soundcore Select 4 Go speaker, USB-C charging cable, and documentation included in the product packaging.

Setup Guide

Charging the Speaker

  1. Connect the provided USB-A to C cable to the charging port on the speaker.
  2. Connect the other end of the cable to a compatible USB power adapter (not included).
  3. Allow approximately 4.5 hours for a full charge. The LED indicator will show charging status.

Powering On/Off

  • To power on, press and hold the power button until the indicator light illuminates.
  • To power off, press and hold the power button again until the indicator light turns off.

Operating Instructions

Bluetooth Pairing

  1. Ensure the speaker is powered on and in pairing mode (Bluetooth indicator will flash).
  2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Soundcore Select 4 Go".
  3. Select the speaker from the list of available devices to connect. A solid blue light indicates a successful connection.

Controlling Playback

  • Play/Pause: Press the Play/Pause button.
  • Volume Up: Press the '+' button.
  • Volume Down: Press the '-' button.
  • Next Track: Press and hold the '+' button.
  • Previous Track: Press and hold the '-' button.

True Wireless Stereo (TWS) Pairing

To achieve a more immersive stereo sound experience, two Soundcore Select 4 Go speakers can be paired together.

  1. Connect one speaker to your smartphone via Bluetooth. This will be the primary speaker.
  2. Power on the second speaker.
  3. On both speakers, press and hold the Bluetooth button for 2 seconds. The speakers will attempt to pair with each other.
  4. Once successfully paired, the primary speaker's Bluetooth indicator will remain solid blue, and the secondary speaker's indicator will also be solid blue.
Two Soundcore Select 4 Go speakers paired for TWS

Image: Two Soundcore Select 4 Go speakers, one black and one blue, demonstrating the True Wireless Stereo (TWS) pairing capability for enhanced audio.

Using the Soundcore App

The Soundcore app allows for custom equalization (EQ) settings to tailor the audio output to your preference.

  • Download the Soundcore app from your device's app store.
  • Connect your Soundcore Select 4 Go speaker to your device via Bluetooth.
  • Open the app and follow the on-screen instructions to connect to your speaker.
  • Adjust the Pro EQ settings to match your desired sound profile.
Soundcore app interface for custom EQ

Image: A smartphone screen displaying the Soundcore app's equalizer interface, allowing users to customize the audio profile of their speaker.

Maintenance and Care

  • Cleaning: Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Water Protection: The speaker is IP67 waterproof and dustproof. Ensure the charging port cover is securely closed before exposing the speaker to water or dust. It can be immersed in up to 3.3 ft (1 meter) of water for up to 30 minutes.
  • Storage: Store the speaker in a cool, dry place when not in use for extended periods.
  • Battery Care: To preserve battery life, fully charge the speaker before first use and recharge it at least once every 3 months if not used regularly.
Soundcore Select 4 Go in a bathroom setting, highlighting IP67

Image: The Soundcore Select 4 Go speaker positioned near a bathtub, illustrating its IP67 waterproof rating suitable for bathroom environments.

Troubleshooting

ProblemPossible Solution
Speaker does not power on.Ensure the battery is charged. Connect the speaker to a power source using the provided USB-C cable.
Cannot pair with Bluetooth device.
  • Ensure the speaker is in pairing mode (flashing blue light).
  • Make sure Bluetooth is enabled on your device.
  • Move the speaker closer to your device (within 30 meters).
  • Forget "Soundcore Select 4 Go" from your device's Bluetooth list and try pairing again.
  • Restart both the speaker and your device.
No sound or low volume.
  • Increase the volume on both the speaker and your connected device.
  • Ensure the speaker is properly connected via Bluetooth.
  • Check if the audio source is playing correctly.
TWS pairing fails.
  • Ensure both speakers are Soundcore Select 4 Go models.
  • Disconnect any existing Bluetooth connections from both speakers.
  • Follow the TWS pairing steps precisely.
  • Ensure both speakers are fully charged.

Specifications

FeatureDetail
Model NameA31X1 Select 4 Go Shower Bluetooth Speaker
BrandSoundcore
Connectivity TechnologyBluetooth
Wireless Communication TechnologyBluetooth
Speaker Maximum Output Power5 Watts
Battery Life20 Hours
Charging Time4.5 Hours
Water Resistance LevelIP67 Waterproof
Product Dimensions3.23"D x 4.72"W x 1.89"H
Item Weight9.3 Ounces
Bluetooth Range30 Meters
MaterialPC+ABS
Controller TypeButton
Audio Output ModeMono

Warranty Information

The Soundcore Select 4 Go speaker comes with a Full Warranty. Soundcore provides 24-month protection for this product, ensuring continuous playback and performance under specified conditions.

  • Withstands continuous playback for 5 days at 40°C with consistent sound quality and no performance degradation.
  • Battery retains 95% performance after 300 cycles at maximum current.
  • Buttons can be pressed up to 3,000 times without issues.

For detailed warranty terms and conditions, please refer to the official Soundcore website or the included safety card.

24 Month Protection Shield

Image: A graphic indicating 24-month protection, symbolizing the product's durability and warranty coverage.

Support

For further assistance, product registration, or frequently asked questions, please visit the official Soundcore support page or refer to the User Guide PDF.

© 2025 Soundcore. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.