Edifier W800BT SE Wireless Over-Ear Headphones User Manual

1. Introduction

Thank you for choosing the Edifier W800BT SE Wireless Over-Ear Headphones. This manual provides detailed instructions on how to set up, operate, and maintain your headphones to ensure optimal performance and longevity.

What's in the Box:

• Headset x 1
• Type-C Cable x 1
• User Manual x 1

Image: The Edifier W800BT SE Wireless Over-Ear Headphones in gray, showcasing their sleek design.

2. Setup

2.1 Charging the Headphones

Before first use, fully charge your headphones. Connect the supplied Type-C cable to the charging port on the headphones and the other end to a USB power source. The indicator light will show charging status.

• A full charge provides approximately 45 hours of continuous playback.
• A quick 15-minute charge can provide up to 8 hours of use.

Image: A close-up of the headphone's USB-C charging port with the cable connected, indicating charging.

Image: A visual representation of the headphone's impressive battery life and fast charging capabilities.

2.2 Power On/Off

To power on, press and hold the power button until the indicator light illuminates. To power off, press and hold the power button until the indicator light turns off.

2.3 Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the power button for approximately 3-5 seconds until the indicator light flashes rapidly, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for "EDIFIER W800BT SE" in the list of available devices.
4. Select "EDIFIER W800BT SE" to connect. Once connected, the indicator light will stop flashing and remain solid.

Image: A visual representation of the Bluetooth 5.4 chip, highlighting its role in faster and more stable connectivity.

2.4 Multipoint Connection

The W800BT SE headphones support multipoint connection, allowing you to connect to two Bluetooth devices simultaneously. This enables seamless switching between devices, for example, from a laptop for music to a phone for calls.

Image: A graphic illustrating the multipoint connection feature, showing the headphones connected to both a smartphone and a laptop.

3. Operating the Headphones

3.1 Controls

The headphones feature intuitive controls located on the earcup. Refer to the diagram below for button functions:

Image: A detailed diagram showing the location and function of each control button on the Edifier W800BT SE headphones.

• Single Press (Multi-function button): Play/Pause, Answer/End a call
• Double Press (Multi-function button): Reject a call
• Triple Press (Multi-function button): Activate Voice Assistant
• Single Press (+): Volume up
• Press and Hold (+): Next track
• Single Press (-): Volume down
• Press and Hold (-): Previous track
• Single Press (Mode switch button): Switch between Music mode, Game mode, and Theatre mode.

3.2 Sound Quality

The headphones are equipped with 40mm dynamic drivers and titanium-coated composite diaphragms, engineered to deliver high-fidelity audio with a broad soundstage, powerful bass, and clear mid-high frequencies.

Image: An exploded view diagram highlighting the 40mm dynamic driver with its titanium-coated composite diaphragm, responsible for high-fidelity audio.

3.3 AI Call Noise Reduction

The integrated AI noise reduction algorithm, combined with high-sensitivity microphones, effectively filters out background noise during calls, ensuring crystal-clear voice clarity for hands-free communication.

Image: A person wearing the headphones while on a call, with a visual overlay demonstrating the AI call noise reduction feature separating voice from background noise.

3.4 Game Mode

Activate Game Mode for an ultra-low latency experience of just 0.06 seconds. This ensures perfect audio-visual synchronization, enhancing your immersive gaming sessions.

Image: A user enjoying a mobile game with the headphones, illustrating the ultra-low latency of 0.06 seconds for synchronized audio and visuals.

3.5 EDIFIER ConneX App

Enhance your experience by downloading the EDIFIER ConneX app. The app provides additional functions including personalized control settings, preset EQ options, custom EQ adjustments, schedule power off, and a "Find Your Product" feature.

Image: Multiple smartphone screens displaying the EDIFIER ConneX app interface, showcasing its various features like EQ settings and personalized controls.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Edifier W800BT SE headphones.

4.1 Cleaning

• Use a soft, dry cloth to wipe the surfaces of the headphones.
• Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface.
• Keep the charging port free of dust and debris.

4.2 Storage

When not in use, store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. The foldable design allows for compact storage, ideal for daily use and travel.

Image: The Edifier W800BT SE headphones in their folded configuration, demonstrating their portability and ease of storage.

5. Troubleshooting

If you encounter any issues with your headphones, please refer to the following common problems and solutions:

6. Specifications

Key technical specifications for the Edifier W800BT SE Wireless Over-Ear Headphones:

7. Warranty and Support

Edifier products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Edifier website.

Please retain your proof of purchase for warranty claims.