ANTDALIS AK-005 Sunrise Alarm Clock User Manual

1. Introduction

The ANTDALIS AK-005 Sunrise Alarm Clock is designed to provide a gentle and natural wake-up experience. It combines a simulated sunrise light with natural alarm sounds, a dimmable night light, and a bedside lamp function. This manual will guide you through the setup, operation, and maintenance of your device.

Image 1: The ANTDALIS AK-005 Sunrise Alarm Clock, a white circular device with a digital time display on the right side.

2. Safety Information

• Read all instructions carefully before using the device.
• Keep the device away from water and high humidity environments.
• Use only the provided power adapter and USB cable to prevent damage.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.
• Keep out of reach of children unless under adult supervision.

3. Package Contents

Please check the package for the following items:

• ANTDALIS AK-005 Main Unit
• USB Power Cable
• User Manual (This document)

4. Product Overview: Components and Controls

Familiarize yourself with the various parts and controls of your ANTDALIS AK-005 Sunrise Alarm Clock:

Image 2: A diagram illustrating the labeled components of the ANTDALIS AK-005 Sunrise Alarm Clock, showing the front and back views.

• Lamp/Snooze Area: The large circular light surface on the front. Tap once to snooze an active alarm. Double-tap to turn off the alarm. Long press to adjust night light brightness.
• Time Display: Digital display showing the current time.
• Display Area: The section on the right side containing the time display and control buttons.
• Time Button: Used to enter time setting mode.
• Alarm Clock Button: Used to enter alarm setting mode.
• Up/Down Buttons: Used to adjust values (time, brightness, volume) during settings.
• DC Port: Power input port on the back of the device.
• Alarm Sound Switch: A physical switch on the back to enable or disable alarm sounds.

5. Setup

1. Power Connection: Connect the provided USB power cable to the DC port on the back of the alarm clock. Plug the other end into a compatible USB power adapter (not always included) and then into a wall outlet. The device will power on.
2. Initial Time Setting: Upon first power-on, the time display may flash or show a default time. Proceed to Section 6.1 to set the correct time.

6. Operating Instructions

6.1. Setting the Current Time

1. Press the Time Button once. The hour digits will start flashing.
2. Use the Up/Down Buttons to adjust the hour.
3. Press the Time Button again. The minute digits will start flashing.
4. Use the Up/Down Buttons to adjust the minutes.
5. Press the Time Button a third time to confirm and exit time setting mode.
6. To switch between 12-hour and 24-hour format, press and hold the Time Button for 3 seconds during time setting.

Image 3: An illustration showing various features including 12/24h time format options, 7 sound options, and 10 volume levels.

6.2. Setting the Alarm

1. Press the Alarm Clock Button once. The alarm hour digits will start flashing.
2. Use the Up/Down Buttons to adjust the alarm hour.
3. Press the Alarm Clock Button again. The alarm minute digits will start flashing.
4. Use the Up/Down Buttons to adjust the alarm minutes.
5. Press the Alarm Clock Button a third time to confirm and exit alarm setting mode.
6. Ensure the Alarm Sound Switch on the back is set to ON if you desire an audible alarm.

6.3. Sunrise Simulation

The alarm clock features a sunrise simulation that gradually brightens the light 30 minutes before your set alarm time. The light transitions from a soft red glow to a bright white light, mimicking a natural sunrise.

Image 4: A visual representation of the sunrise simulation, showing the light gradually changing color and intensity from red to white over a 30-minute period (e.g., 7:00 AM to 7:30 AM).

6.4. Alarm Sounds and Volume

You can choose from 7 natural alarm sounds and adjust the volume from level 1 to 10.

1. During alarm setting (Section 6.2), after setting the minutes, press the Alarm Clock Button again. The current sound icon will flash.
2. Use the Up/Down Buttons to cycle through the 7 available natural sounds (e.g., birdsong, ocean waves, streams).
3. Press the Alarm Clock Button again. The volume level will flash.
4. Use the Up/Down Buttons to adjust the volume from 1 to 10.
5. Press the Alarm Clock Button one last time to confirm and exit.

Image 5: The alarm clock displaying icons representing 7 different wake-up alarm sounds, along with text indicating 10 volume levels and 12/24h time format.

6.5. Snooze Function

When the alarm sounds, you can activate the snooze function for an additional 9 minutes of sleep.

• To Snooze: Gently tap the top surface of the alarm clock (the Lamp/Snooze Area) once. The alarm will pause for 9 minutes and then sound again.
• To Turn Off Alarm: Double-tap the top surface of the alarm clock. The alarm will be deactivated for the day.

Image 6: An illustration demonstrating how to tap the clock to snooze for 9 minutes and double-tap to turn off the alarm for the day.

6.6. Night Light and Bedside Lamp

The ANTDALIS AK-005 can also function as a dimmable night light or bedside lamp.

• To Turn On/Off: Double-tap the top surface of the alarm clock (the Lamp/Snooze Area) to turn the light on or off.
• To Adjust Brightness: When the light is on, press and hold the top surface for approximately 2 seconds. The brightness will smoothly adjust. Release your finger when the desired brightness level is reached.

Image 7: A depiction of the night light function, showing a hand touching the top of the clock to smoothly adjust brightness, and the clock providing soft illumination in a room.

6.7. Adjusting LED Display Brightness

The brightness of the digital time display can be adjusted to suit your preference.

• While the clock is in normal time display mode (not in setting mode), press the Up Button to increase the display brightness.
• Press the Down Button to decrease the display brightness.
• There are multiple brightness levels, including an option to turn the display off completely.

Image 8: Visual examples of the adjustable brightness levels for the LED time display, ranging from bright to completely off, alongside images of the clock in different room lighting conditions.

7. Maintenance

• To clean the device, gently wipe it with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the surface.
• Ensure the device is unplugged before cleaning.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For any questions, technical assistance, or warranty inquiries regarding your ANTDALIS AK-005 Sunrise Alarm Clock, please contact ANTDALIS customer service through the retailer's platform or the official ANTDALIS website. Please have your model number (AK-005) and purchase information ready when contacting support.