Introduction
Thank you for choosing the Redragon GC-F013 120mm PC Cooling Fan. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new cooling fan. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Image: The Redragon GC-F013 120mm PC Cooling Fan showcasing its RGB lighting in a computer setup.
Safety Information
- Always disconnect power from your computer before installing or removing any components.
- Handle the fan by its frame to avoid damaging the blades or wiring.
- Ensure proper orientation of the fan for desired airflow (intake or exhaust).
- Do not attempt to modify the fan or its cables. This may void the warranty and cause damage.
- Keep out of reach of children.
Package Contents
Verify that all items are present in your package:
- Redragon GC-F013 120mm PC Cooling Fan (Quantity: 3)
- Short mounting screws (4 per fan)
- Longer mounting screws (4 per fan)
Product Features
- High Performance Cooling: Automatic speed control via 4-pin PWM interface, adjusting fan speed based on motherboard temperature for efficient cooling.
- Vibrant RGB LED Lighting: High-brightness ARGB fan blades effectively reflect light, providing customizable aesthetic appeal.
- Silent Operation: Designed for quiet performance while delivering high airflow for improved cooling.
- Versatile Application: Suitable for use as a case fan, or in conjunction with a CPU cooler to enhance overall system cooling.
Image: A direct front view of the Redragon GC-F013 fan, highlighting its multi-color RGB illumination.
Image: An angled perspective of the Redragon GC-F013 fan, showing the depth and vibrant colors of its ARGB lighting.
Setup and Installation
- Prepare Your System: Power off your computer and disconnect it from the power outlet. Open your computer case to access the fan mounting locations.
- Determine Airflow: Decide whether you want the fan to act as an intake (bringing cool air into the case) or exhaust (expelling hot air from the case). Fans typically have an arrow on the side indicating airflow direction.
- Mount the Fan:
- Position the fan against the desired mounting location (e.g., front, rear, top, or bottom of the case, or on a radiator).
- Align the screw holes on the fan with those on the case or radiator.
- Secure the fan using the provided short or longer mounting screws. Do not overtighten.
- Connect the Power Cable: Locate an available 4-pin PWM fan header on your motherboard. Carefully plug the fan's 4-pin connector into the motherboard header. Ensure the connector is fully seated.
- Manage Cables: Route the fan cable neatly to avoid interference with other components and to improve airflow within the case.
- Close Case and Power On: Once all fans are installed and connected, close your computer case, reconnect the power, and power on your system.
Image: A side profile of the Redragon GC-F013 fan, illustrating its thickness and mounting screw holes.
Operating Instructions
The Redragon GC-F013 fan utilizes a 4-pin PWM (Pulse Width Modulation) connector, allowing your motherboard to automatically control the fan speed based on system temperature. This ensures efficient cooling when needed and quieter operation during lighter loads.
- Automatic Speed Control: Once connected to a 4-pin PWM header, the fan speed will be managed by your motherboard's BIOS/UEFI settings or operating system software. You can typically adjust fan curves in your motherboard's utility software or BIOS to customize performance.
- RGB Lighting: The ARGB lighting is typically controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) if your motherboard supports addressable RGB. Ensure the fan's RGB cable (if separate from PWM) is connected to the correct ARGB header on your motherboard.
Maintenance
- Dust Cleaning: Periodically inspect your fans for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
- Cleaning Procedure:
- Power off and unplug your computer.
- Use compressed air to gently blow dust off the fan blades and frame. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearing.
- Alternatively, use a soft, dry cloth or a soft brush to carefully wipe away dust.
- Do not use liquid cleaners or immerse the fan in water.
Troubleshooting
- Fan Not Spinning:
- Ensure the 4-pin PWM connector is securely plugged into the motherboard header.
- Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- Verify that the fan blades are not obstructed by cables or other components.
- RGB Lighting Not Working:
- Confirm that the ARGB cable (if separate) is correctly connected to a compatible 3-pin 5V ARGB header on your motherboard, not a 4-pin 12V RGB header. Connecting to the wrong header can damage the LEDs.
- Ensure your motherboard's RGB software is installed and configured to control the ARGB header.
- Check for any loose connections.
- Excessive Noise:
- Ensure all mounting screws are tightened properly, but not excessively.
- Check for any cables or objects touching the fan blades.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern and temperatures allow.
Specifications
| Feature | Specification |
|---|---|
| Model | GC-F013 |
| Fan Size | 120mm x 120mm x 25mm |
| Bearing Type | S-FDB Bearing (Hydraulic Bearing) |
| Connector Type | 4-Pin PWM |
| Voltage | 12 Volts |
| Maximum Rotational Speed | Up to 1550 RPM |
| Noise Level | 25 Decibels |
| Cooling Method | Air |
| Material | Copper |
| Package Dimensions (3-pack) | 6.1"L x 3.15"W x 5.1"H |
| Item Weight | 1.01 pounds (for 3 fans) |
| Number of Items | 3 (Fans) |
Warranty and Support
For warranty information, technical support, or any inquiries regarding your Redragon GC-F013 cooling fan, please visit the official Redragon website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Official Redragon Store: Redragon Store on Amazon
