Introduction
Thank you for choosing the LUMISOL 7-Piece Dining Table Set. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new dining furniture. Please read these instructions carefully before assembly and retain them for future reference.
Image: The LUMISOL 7-Piece Dining Table Set, featuring a rectangular table with a V-shaped base and six upholstered chairs, arranged in a modern dining space.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight capacity: Dining Table: 330 lbs (150 kg), Dining Chair: 330 lbs (150 kg) per piece.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Avoid standing on the table or chairs.
- Do not use power tools for assembly unless specifically instructed, as this may overtighten fasteners and damage the product.
Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Dining Table
- 6 x Upholstered Dining Chairs
- 1 x Hardware Pack (includes all necessary screws, bolts, and tools)
- 1 x Assembly Instruction Manual (this document)
Setup and Assembly
Assembly typically takes approximately 30 minutes with two adults. All required tools are included in the hardware pack.
Dining Table Assembly
- Unpack all table components and lay them on a soft, clean surface.
- Attach the V-shaped table legs to the tabletop using the provided hardware. Ensure the legs are oriented correctly.
- Securely tighten all bolts. Do not overtighten.
- Carefully flip the assembled table upright.
Dining Chair Assembly
- Unpack all chair components for one chair.
- Attach the front legs to the chair seat frame.
- Attach the back legs to the chair seat frame. Ensure to align the chair legs properly before tightening screws to prevent wobbling.
- Attach the chair backrest to the seat frame.
- Securely tighten all bolts. Repeat for the remaining chairs.
Image: Close-up showing the features of the upholstered dining chairs, highlighting the comfortable seat cushion, ergonomic design, and adjustable feet for stability.
Operating and Usage
Your LUMISOL 7-Piece Dining Table Set is designed to comfortably seat six people, making it ideal for kitchen or living room dining. The 63-inch rectangular table provides ample space for meals and activities, while the V-shaped leg support offers generous legroom.
- Place the dining set on a flat, stable surface.
- Distribute weight evenly on the table surface.
- Use coasters or placemats to protect the tabletop from hot items or spills.
Maintenance
Proper care will ensure the longevity and appearance of your dining set.
Tabletop Care
The imitation marble tabletop is waterproof, dirt-resistant, and easy to clean. For daily cleaning, wipe with a soft, damp cloth. For spills, wipe immediately with a clean, dry cloth. Avoid using abrasive cleaners or harsh chemicals, which can damage the finish.
Image: Visual representation of the dining table's durable features, including safe round corners, a 1.8-inch thick tabletop, an easy-to-clean surface, and sturdy V-shaped legs.
Chair Upholstery Care
For the upholstered chairs, spot clean with a mild fabric cleaner as needed. Test the cleaner on an inconspicuous area first. Vacuum regularly to remove dust and debris.
General Care
- Avoid direct sunlight exposure for prolonged periods to prevent fading.
- Keep the furniture away from direct heat sources.
- Periodically check and tighten all hardware to maintain stability.
Troubleshooting
Wobbly Table/Chairs
- Ensure all bolts are securely tightened.
- Check that the furniture is on a level surface. Use the adjustable feet on the chairs to compensate for uneven floors.
- Disassemble and reassemble if necessary, ensuring all parts are aligned correctly.
Scratches on Tabletop
- Minor scratches may be buffed out with a furniture polish suitable for imitation marble.
- For deeper scratches, professional repair may be required.
- Always use placemats and coasters to prevent future scratches.
Specifications
| Feature | Detail |
|---|---|
| Product Type | 7-Piece Dining Table Set |
| Color | Gray |
| Dining Table Dimensions (L x W x H) | 63 x 35.4 x 29.9 inches (160 x 90 x 76 cm) |
| Dining Table Weight | 144.58 lbs (65.58 kg) |
| Dining Table Weight Capacity | 330 lbs (150 kg) |
| Dining Chair Dimensions (L x W x H) | 17.3 x 16.5 x 37.5 inches (44 x 42 x 95.25 cm) |
| Dining Chair Weight (each) | 11 lbs (5 kg) |
| Dining Chair Weight Capacity (each) | 330 lbs (150 kg) |
| Tabletop Material | MDF (Medium-Density Fiberboard) |
| Chairtop Material | Fabric + Plywood + Foam |
| Table Legs Material | MDF |
| Chair Legs Material | Metal |
| Assembly Required | Yes (approx. 30 min) |
| Additional Tools Required | None (all tools included) |
Image: A detailed diagram illustrating the dimensions and weight capacities of both the dining table and a single dining chair in inches and pounds.
Warranty
This LUMISOL dining table set comes with a 6-month manufacturer's warranty from the date of purchase. The warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Support
For any questions, missing parts, or assistance with assembly or product use, please contact LUMISOL customer support. Refer to your purchase documentation for specific contact details or visit the official LUMISOL website.