Introduction
This manual provides detailed instructions for the safe and effective use of your Slevoo Carpet Cleaner Machine AU-005. Designed for powerful spot and stain removal on carpets, rugs, and upholstery, this portable cleaner features a 400W motor delivering 10.5Kpa suction for deep cleaning. Please read all instructions carefully before operation.
Product Overview
Figure 1: Slevoo Carpet Cleaner Machine AU-005, showcasing its compact design, dual tanks, and included cleaning tools.
The Slevoo Carpet Cleaner Machine AU-005 is a compact and powerful solution for tackling tough stains and spills. Its dual-tank system keeps clean and dirty water separate, ensuring efficient cleaning. The machine comes equipped with specialized tools for various cleaning needs.
Setup
- Unpack the Unit: Carefully remove all components from the packaging. Ensure all parts are present: main unit, hose with cleaning tool, and power cord.
- Fill the Clean Water Tank: Locate the clean water tank (40oz capacity). Remove it from the unit and fill it with warm water. If using a cleaning solution, add the recommended amount of low-foaming or non-foaming cleaner. Do not exceed the 'MAX' fill line.
Figure 2: Illustration of filling the large capacity clean water tank.
- Secure the Tank: Place the filled clean water tank back onto the main unit, ensuring it clicks securely into place.
- Attach Cleaning Tool: Connect the desired cleaning tool (e.g., 3.2" Tough Stain Tool or Tight Spot Tool) to the end of the hose.
- Connect Power: Plug the 16.4 ft power cord into a suitable electrical outlet (Rated voltage: 120V, Rated current: 3amps).
Operating Instructions
The Slevoo Carpet Cleaner Machine operates on a three-step process: Spray, Scrub, and Suction.
Figure 3: Visual representation of the deep cleaning process: spray, scrub, and suction.
- Power On: Press the power button on the main unit to turn on the machine.
- Spray Solution: Hold the cleaning tool over the stained area. Press the trigger on the tool handle to spray cleaning solution onto the stain. Allow the solution to penetrate for a few moments.
- Scrub the Stain: Gently scrub the stained area with the brush on the cleaning tool. The 3.2" Tough Stain Tool is ideal for larger areas, while the Tight Spot Tool is designed for crevices and hard-to-reach spots.
Figure 4: The 3.2" Tough Stain Tool for general scrubbing and the Tight Spot Tool for detailed cleaning.
- Suction Dirty Water: Release the spray trigger. Tilt the cleaning tool slightly and pull it slowly over the treated area to suction up the dirty water and loosened debris. Repeat as necessary until the area is clean and as dry as possible.
- Versatile Cleaning: This machine is suitable for various surfaces including carpets, car seats, sofas, stairs, curtains, cribs, and even toys.
Figure 5: Demonstrating the effectiveness of the cleaner on pet paw prints.
Operation Videos
Video 1: Demonstrates the effective spot cleaning capabilities of the Slevoo machine on an office chair. Shows the spray, scrub, and suction action.
Video 2: Shows the portability and ease of use for small spills on a rug, highlighting the machine's suction power.
Maintenance
- Empty and Clean Dirty Water Tank: After each use, or when the dirty water reaches the 'MAX' line, turn off the machine and remove the dirty water tank. Dispose of the dirty water and rinse the tank thoroughly with clean water.
Figure 6: The visible dirty water tank, indicating the maximum fill level.
- Clean the Cleaning Tool: The cleaning head is detachable for easy rinsing. Remove any hair or debris from the brush and nozzle.
Figure 7: Detachable cleaning head for thorough cleaning after use.
- Store Properly: Wrap the hose and power cord neatly around the designated storage areas on the unit. Store the machine in a cool, dry place.
Troubleshooting
If you encounter any issues with your Slevoo Carpet Cleaner Machine, please refer to the following common solutions:
- No Suction: Check if the dirty water tank is full and needs emptying. Ensure all tanks and the cleaning tool are securely attached. Verify the hose is not kinked or blocked.
- No Spray: Ensure the clean water tank has sufficient solution. Check if the spray nozzle is clogged.
- Machine Not Turning On: Verify the power cord is securely plugged into a working outlet. Check for any tripped circuit breakers.
- Leaking: Ensure both clean and dirty water tanks are properly seated and sealed. Do not overfill the clean water tank, especially if using foaming solutions.
For further assistance, please contact Slevoo Professional Customer Service.
Specifications
| Feature | Specification |
|---|---|
| Brand | Slevoo |
| Model Name | Carpet Spot Cleaner Machine (AU-005) |
| Color | Black |
| Product Dimensions | 7.48"D x 12.95"W x 13.77"H |
| Item Weight | 9.61 pounds |
| Suction Power | 10.5Kpa |
| Motor Power | 400W |
| Clean Solution Capacity | 40oz |
| Hose Length | 4 ft |
| Power Cord Length | 16.4 ft |
| Rated Voltage | 120V |
| Rated Current | 3amps |
Warranty and Support
Slevoo products are manufactured under strict quality standards. For any questions, troubleshooting, or support needs, please contact Slevoo Professional Customer Service. We offer friendly customer service with a response time typically within 24 hours via email.
For information regarding product warranty, please refer to the documentation included with your purchase or contact customer support directly.
