Introduction
This manual provides detailed instructions for the safe and efficient use of your Baseus PicoGo W2 Wireless Charger. Please read this manual thoroughly before using the product and retain it for future reference.
The Baseus PicoGo W2 is a Qi2 certified 15W magnetic wireless charger stand featuring a 65W retractable cable, designed as a 2-in-1 wireless charging station for tablets, iPhone 12-16 series, and AirPods.
Safety Information
- Do not expose the device to extreme temperatures, humidity, or corrosive environments.
- Avoid dropping, disassembling, or attempting to repair the device yourself. This will void the warranty.
- Keep the device away from water and other liquids.
- Use only compatible power adapters and cables as recommended by the manufacturer. Ensure you use a fast charging plug for optimal performance.
- Do not place metal objects or foreign materials between the charging pad and your device during wireless charging.
- The magnetic alignment works with iPhone series 12-16. iPhone series 8-11 must have a magnetic case for proper alignment.
- Wireless charging is effective at a thickness of less than 5 mm. Thicker cases may weaken the magnetic connection.
Package Contents
Please check the package for the following items:
- Baseus PicoGo W2 Wireless Charger
- USB-C to USB-C Input Cable
- User Manual
- Fixed Stickers (for desktop stability)
Note: A charging plug is not included in the package.
Product Overview
The Baseus PicoGo W2 features a compact design with integrated wireless and wired charging capabilities.
Figure 1: Baseus PicoGo W2 Wireless Charger in use, showing a smartphone magnetically attached and charging, with the retractable USB-C cable extended.
- Magnetic Wireless Charging Pad: Provides up to 15W Qi2 certified wireless charging for compatible devices.
- Extendable Stand: Allows adjustment of the charging pad angle for optimal viewing and compatibility with larger devices like Pro and Pro Max models.
- Retractable USB-C Output Cable: A built-in 1.9ft/60cm USB-C cable for wired charging of laptops, tablets, or other devices. This cable is for output only.
- USB-C Input Port: Located on the side for connecting the charger to a power source using the included USB-C to USB-C cable.
- Adhesive Base: For secure placement on a desktop, preventing slips.
Figure 2: Illustration of the extendable stand mechanism, showing the charger in its compact, partially extended, and fully extended positions.
Figure 3: The retractable USB-C output cable, highlighting its length and function for charging external devices.
Setup
- Connect to Power: Use the included USB-C to USB-C cable to connect the input port of the Baseus PicoGo W2 charger to a compatible fast charging power adapter (not included). For optimal performance, a 100W power adapter is recommended.
- Positioning: Place the charger on a stable, flat surface. If desired, use the provided fixed stickers on the base of the charger to secure it to your desktop.
- Adjust Stand: Gently pull the magnetic charging pad upwards to extend the stand to your desired angle. The stand can be adjusted to accommodate various smartphone sizes, including Pro and Pro Max models.
Figure 4: The Baseus PicoGo W2 charger securely placed on a desktop, demonstrating its stability for use with a laptop.
Operating Instructions
Wireless Charging (for Smartphones and AirPods)
- Ensure the charger is connected to a power source.
- Place your Qi2-compatible iPhone (12-16 series) or AirPods (3/4) onto the magnetic charging pad. For iPhone 8-11 series, a magnetic case is required for proper alignment.
- The device will magnetically snap into place and begin charging. The wireless charging output is up to 15W.
- Note: The 15W Max. wireless charging output will progressively reduce to 5W as your iPhone's battery power increases, due to Apple's wireless charging protocol. Ensure your iOS system is upgraded to 17.2.1 or above for Qi2 15W MagSafe charging support.
Figure 5: A smartphone wirelessly charging on the Baseus PicoGo W2, illustrating the 15W fast charging capability and Qi2 certification.
Wired Charging (for Laptops, Tablets, etc.)
- Pull out the retractable USB-C output cable from the side of the charger.
- Connect the USB-C end of the retractable cable to your laptop, tablet, or other compatible device.
- The charger can provide up to 67W wired charging via this cable.
- Important: The retractable cable is for output only and cannot be used as an input cable for the charger itself.
Figure 6: The Baseus PicoGo W2 simultaneously charging a smartphone wirelessly and a laptop via its retractable USB-C cable, demonstrating its dual-device charging capability.
Figure 7: Diagram illustrating that the retractable cable is for output to devices only, and not for input power to the charger.
Simultaneous Charging
The Baseus PicoGo W2 can charge a smartphone wirelessly and a laptop/tablet via the retractable cable simultaneously. When equipped with a 100W input, it can charge an iPhone 15 to 27% and a MacBook Pro to 40% in approximately 30 minutes.
Figure 8: Visual representation of the Baseus PicoGo W2 charging an iPhone and a MacBook Pro simultaneously, highlighting fast charging percentages over 30 minutes.
Maintenance
- Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the retractable cable is fully retracted.
- Cable Care: Avoid excessive pulling or bending of the retractable cable to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging wirelessly. |
|
|
| Slow charging speed. |
|
|
| Retractable cable not charging device. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | BSW-540 |
| Brand | Baseus |
| Wireless Charging Output | 15W Max (Qi2 Certified) |
| Wired Charging Output (Retractable Cable) | 67W Max |
| Retractable Cable Length | 1.9 ft / 60 cm |
| Input Voltage | 120 Volts (Requires compatible power adapter) |
| Connector Type | USB Type C (for input and output) |
| Compatible Devices | iPhone 12-16 Series, iPhone 8-11 Series (with magnetic case), Galaxy Series, MacBook Series, AirPods Pro 1/2 Wireless Earbuds |
| Special Feature | Magnetic, Extendable Stand, Retractable Cable |
| Item Weight | 8.4 ounces |
| Package Dimensions | 5.51 x 3.31 x 1.85 inches |
Figure 9: Table illustrating power distribution based on input wattage when charging an iPhone and a laptop simultaneously.
Warranty and Support
For warranty information, technical support, or customer service inquiries, please refer to the official Baseus website or contact their customer support directly. Details are typically provided on the product packaging or the manufacturer's official website.
You can visit the Baseus store on Amazon for more information: Baseus Official Store
