Pemberly Row King Storage Bed Instruction Manual

Product Overview

The Pemberly Row King Storage Bed is a transitional style bed featuring a sleigh headboard and a cherry finish. Constructed with solid wood, manufactured wood, veneers, and metal, it offers both durability and an elegant aesthetic. This king-sized bed includes two full-extension storage drawers integrated into the footboard, providing practical space for bedroom essentials. Its generous dimensions of 58 inches H x 80 inches W x 97 inches D make it a prominent piece in larger bedrooms.

Image: The Pemberly Row King Storage Bed in cherry finish, showcasing its sleigh headboard and footboard storage drawers.

Safety Information

• Read all instructions carefully before assembly and use.
• Ensure all hardware is securely tightened before using the bed. Periodically check and re-tighten as necessary.
• Do not allow children to play on or around the bed without supervision.
• Do not exceed the recommended weight capacity for the bed frame.
• Keep small parts away from children during assembly to prevent choking hazards.
• Always lift the bed when moving it; do not drag to prevent damage to the frame or flooring.

Setup and Assembly

Assembly is required for this bed. It is recommended to have two adults for assembly. Please ensure all components are present before beginning. Refer to the detailed assembly instructions provided in the packaging for specific steps and diagrams. The general steps are outlined below:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all hardware and components are accounted for against the parts list.
2. Assemble Headboard: Attach any necessary support pieces or decorative elements to the sleigh headboard as per the instructions.
3. Assemble Footboard with Drawers: Ensure the full-extension drawers are properly installed and glide smoothly within the footboard frame.
4. Attach Side Rails: Connect the side rails to both the headboard and footboard using the provided hardware. Ensure connections are secure and stable.
5. Install Bed Slats/Support System: Place and secure the bed slats or support system across the side rails. This provides the foundation for your mattress.
6. Final Tightening: Once all components are assembled, carefully go through and tighten all screws and bolts to ensure the bed is stable and secure. Do not overtighten.

Image: Diagram showing the dimensions of the King Storage Bed: 58" H, 80" W, 97" D.

Operating Instructions

The Pemberly Row King Storage Bed features two full-extension drawers integrated into the footboard for convenient storage.

• Opening Drawers: Gently pull the drawer handles to open the drawers. The full-extension glides allow the drawers to extend completely for easy access to contents.
• Closing Drawers: Push the drawers back into the footboard until they are fully closed and flush with the bed frame. Avoid slamming the drawers to ensure longevity of the glides.
• Weight Capacity: Do not overload the drawers. Distribute weight evenly to prevent damage to the drawer glides and frame.

Image: A close-up view of one of the footboard storage drawers, shown partially open to illustrate its full-extension capability.

Maintenance and Care

Proper care will help maintain the beauty and longevity of your Pemberly Row King Storage Bed.

• Cleaning: Dust regularly with a soft, dry cloth. For spills, wipe immediately with a slightly damp cloth and dry thoroughly. Avoid using harsh chemicals, abrasive cleaners, or silicone-based polishes, as these can damage the cherry finish.
• Protection: Avoid placing hot items directly on the wood surface. Use coasters or protective pads. Keep the bed away from direct sunlight and heat sources to prevent fading and warping.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
• Drawer Glides: If drawers become stiff, a small amount of silicone lubricant can be applied to the glides.

Image: A detailed view of the sleigh headboard, highlighting the cherry finish and panel design.

Troubleshooting

This section addresses common issues you might encounter with your bed.

• Squeaking Noises:
  • Check all hardware connections (bolts, screws, and brackets) and tighten any loose ones.
  • Ensure the bed slats are properly seated and secured.
  • Verify the mattress is correctly positioned and not causing friction against the frame.
• Drawers Sticking or Not Gliding Smoothly:
  • Ensure drawers are not overloaded or unevenly weighted.
  • Check for any obstructions in the drawer glides.
  • Apply a small amount of silicone lubricant to the drawer glides if necessary.
  • Verify that the bed frame is level on the floor.
• Wobbling or Instability:
  • Re-check all assembly connections and ensure they are fully tightened.
  • Confirm the bed is on a flat, level surface. Use furniture levelers if your floor is uneven.

Specifications

Warranty Information

For detailed information regarding the manufacturer's warranty for your Pemberly Row King Storage Bed, please refer to the warranty documentation included with your product packaging or visit the official Pemberly Row store page. Any additional protection plans purchased separately are subject to their own terms and conditions.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact Pemberly Row customer support. Refer to the contact information provided in your product packaging or on the official Pemberly Row website for the most current support options.