HOROW HR-T36
Contents
HOROW HR-T36 Smart Toilet User Manual
Model: HR-T36
1. Introduction and Overview
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your HOROW HR-T36 Smart Toilet. Please read this manual thoroughly before installation and use, and retain it for future reference.
The HOROW HR-T36 is a sophisticated smart toilet designed to enhance your bathroom experience with advanced features such as automatic lid opening/closing, powerful dual flush, integrated bidet functions, heated seat, and a warm air dryer.

2. Safety Information
Always adhere to the following safety guidelines to prevent injury or damage to the product:
- Ensure the toilet is connected to a grounded 120 Volts AC power source.
- Do not immerse the product in water or spray water directly onto electrical components.
- Unplug the toilet from the power outlet before performing any maintenance or cleaning.
- Keep children and pets away from the toilet during operation, especially when the lid is opening/closing automatically.
- Do not attempt to repair or modify the toilet yourself. Contact qualified service personnel for assistance.
- The maximum wattage for this unit is 1240 watts. Ensure your electrical circuit can support this load.
3. Package Contents
Verify that all components are present in the package before beginning installation:
- Smart Toilet Unit
- Use Manual
- Flange
- Installing Template
- Hose
- Wax Ring
- Valve
- Installation Accessories
- Remote Control
- Battery for Remote Control

4. Setup and Installation
The HOROW HR-T36 is designed for floor-mounted installation with a 12-inch rough-in. Professional installation is recommended due to the electrical and plumbing connections required.
4.1 Pre-Installation Check
- Verify your bathroom's rough-in measurement is 12 inches.
- Ensure a dedicated 120V AC grounded electrical outlet is available near the installation area. The power cord length is 43 inches.
- Perform a water flow test: Place a 2-gallon bucket under your existing toilet's water supply line. Open the valve and measure the water collected in 15 seconds. You need at least 1 gallon to ensure proper flushing performance for the HR-T36.
4.2 Plumbing Connection
The toilet features a built-in water pump for powerful flushing, even with lower water pressure. Connect the provided hose and valve to your existing water supply line according to the installation template.

4.3 Toilet Placement
Carefully position the toilet over the flange, aligning the bolts. The toilet's design allows it to sit close to the wall, so ensure adequate clearance for water supply connections.

5. Operating Instructions
Your HOROW HR-T36 Smart Toilet offers a range of automated and customizable functions for optimal comfort and hygiene.
5.1 Automatic Lid Operation
The toilet features sensors that detect your approach and departure, automatically opening and closing the lid for a hands-free experience.

5.2 Flushing Options
The HR-T36 offers multiple ways to flush:
- Auto Dual Flush: Automatically detects full or half flush based on seat time.
- Off-seat Flush: Flushes automatically when you stand up.
- Foot Sensor: Activate flush with a foot gesture.
- Remote Control: Use the provided remote for manual flush.
- Knob: Manual flush option via the side knob. In case of power outage, a short press of the knob will initiate a flush.

5.3 Bidet Functions and Temperature Control
Customize your cleaning experience with various washing methods and adjustable temperatures:
- Washing Modes: Front wash, rear wash, and pulse massage cleaning modes.
- Water Temperature: Adjust water temperature to your preference.
- Heated Seat: The seat temperature can be adjusted to 6 levels (from room temperature to 100°F).
- Warm Air Dryer: Gentle warm air completes your cleaning routine. Air temperature is also adjustable to 6 levels (from room temperature to 122°F).



5.4 Night Light and Digital Display
The intelligent bowl nightlight provides illumination for nighttime use. The exquisite digital display shows current settings for warm air temperature, seat temperature, and water temperature.


6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your smart toilet.
6.1 Self-Cleaning Nozzle
The bidet nozzle features a self-cleaning function to maintain hygiene. This function activates automatically before and after each use.

6.2 Auto Deodorization
The toilet is equipped with an auto deodorization system to minimize unpleasant odors, contributing to a fresher bathroom environment.

6.3 Pre-Wet Function
Upon sitting, a stream of water will pre-wet the inner wall of the bowl. This helps prevent waste from sticking, making the bowl easier to clean.

6.4 General Cleaning
Clean the exterior surfaces with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
7. Troubleshooting
If you encounter issues with your HOROW HR-T36 Smart Toilet, refer to the following common solutions. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Unit not responding | Power cord unplugged, circuit breaker tripped, GFCI outlet tripped. | Check power connection, reset circuit breaker/GFCI. |
| Lid not opening/closing automatically | Sensor obstructed or dirty, object blocking lid path. | Clean sensor, remove obstructions. |
| Weak flush | Insufficient water pressure, water supply valve partially closed. | Ensure water supply valve is fully open. Verify adequate water flow (refer to Section 4.1). |
| Bidet spray not working or weak | Nozzle clogged, water filter dirty, water supply issue. | Clean nozzle, check water filter, ensure water supply is open. |
| Heated seat not warming | Temperature setting too low, power issue. | Adjust seat temperature setting, check power. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | HR-T36 |
| Dimensions (L x W x H) | 26.77 x 16.81 x 19.21 inches |
| Item Weight | 95 pounds |
| Material | Ceramic |
| Color | Black |
| Installation Type | Floor Mounted |
| Rough-In | 12 Inches |
| Voltage | 120 Volts |
| Wattage | 1240 watts |
| Power Source | AC |
| Plug Format | B - US style with ground plug |
| Flush Type | Dual |
| Seat Material Type | Plastic |
| Special Features | Waterproof, Temperature adjustment, Water pressure adjustment, Heated seat, Quiet close Seat |
9. Warranty and Support
HOROW is committed to providing high-quality products and excellent customer service.
- 30-Day Money Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
- 12-Month Replacement Warranty: The product is covered by a 12-month replacement warranty from the date of purchase for manufacturing defects.
- Considerate Service: For any problems or inquiries, please contact our customer service team. We aim to reply within 24 hours.
For further assistance, please visit the official HOROW store or contact customer support through your purchase platform.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.