Model: WF531255AA
Thank you for choosing the Virubi 30-inch Bathroom Vanity. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new vanity. Please read this manual thoroughly before beginning assembly or use, and keep it for future reference.
Image: The Virubi 30-inch Bathroom Vanity in green with its doors closed, showcasing its modern design and gold-finished handles.
Always follow basic safety precautions when assembling or using this product to reduce the risk of injury or damage.
Verify that all components and hardware listed below are included in your package.
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
Unpack all components and lay them out on a protected surface. Identify the main cabinet panels (sides, back, bottom). Assemble the cabinet frame using the provided screws and cam locks. Ensure all connections are secure but do not overtighten.
Image: The vanity cabinet with both doors and the tip-out drawer open, revealing the interior storage compartments and the adjustable shelf.
Attach the hinges to the cabinet doors and then to the main cabinet body. Adjust the hinges to ensure the doors close softly and align properly. Install the adjustable shelf at your desired height. Attach the drawer slides to the tip-out drawer and the cabinet, then insert the drawer. Install the door storage racks onto the inside of the cabinet doors.
Image: A close-up view of the vanity with one cabinet door open, highlighting the interior storage space and the two-tier storage rack attached to the inside of the door.
Carefully place the ceramic sink top onto the assembled cabinet. Ensure it is centered and level. Apply a bead of silicone sealant (not included) around the edges where the sink top meets the cabinet for a secure and waterproof seal. Allow the sealant to cure as per manufacturer's instructions before use.
Install your chosen 4-inch widespread faucet (not included) into the pre-drilled holes on the sink top. Connect the water supply lines and drain according to local plumbing codes. Ensure all connections are tight to prevent leaks. Use a level to verify the vanity is stable and adjust the feet if necessary.
Your Virubi bathroom vanity is designed for practical and convenient use in your bathroom.
Image: A diagram illustrating the ample storage features of the vanity, including the flip-out drawer, two-tier shelves on the door, and the adjustable shelf within the main cabinet.
Proper care will extend the life and maintain the appearance of your vanity.
| Problem | Possible Cause / Solution |
|---|---|
| Doors do not close softly or align properly. | Check hinge adjustments. Most soft-close hinges have screws for fine-tuning alignment and closing speed. |
| Tip-out drawer does not slide smoothly. | Ensure drawer slides are properly installed and free of obstructions. A small amount of lubricant can improve smoothness. |
| Water leaks from sink or plumbing. | Verify all plumbing connections (faucet, drain) are securely tightened. Ensure silicone sealant around the sink top is properly applied and cured. |
| Vanity wobbles or is unstable. | Ensure the vanity is placed on a level surface. Adjust the leveling feet at the bottom of the vanity if present. |
| Attribute | Value |
|---|---|
| Brand | Virubi |
| Model Number | WF531255AA |
| Color | Green |
| Material | Solid Wood, MDF, Ceramic |
| Overall Dimensions (W x D x H) | 30" x 18.3" x 33.59" |
| Sink Type | Integrated Ceramic Sink |
| Faucet Holes | 3 (for 4" widespread faucet, not included) |
| Installation Type | Freestanding |
| Item Weight | 95 Pounds |
| UPC | 196986417878 |
Image: Technical drawing showing the overall dimensions of the vanity, including width, depth, and height, along with internal measurements for storage.
Image: Detailed view of the premium ceramic sink, highlighting the overflow protection and the three pre-drilled holes suitable for a 4-inch widespread faucet.
Virubi provides a one-year quality guarantee for this product. If you encounter any quality problems within one year of purchase, we will provide a replacement or a 100% refund.
For any questions, concerns, or assistance, please do not hesitate to contact our customer support team. We are committed to resolving your issues within 24 hours.
Please refer to your purchase documentation for specific contact details.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
