1. Introduction
Thank you for purchasing the FOCO Officially Licensed Real Madrid CF BRXLZ Brick 3D Football Toy Model. This construction set allows you to build a detailed, pixelated 3D replica of a Real Madrid CF football using interlocking bricks. It is designed for fans and collectors aged 12 and above, offering an engaging building experience and a unique display item.
Image 1.1: Fully assembled Real Madrid CF BRXLZ 3D Football Model.
2. Safety Information
Please read and understand all safety warnings before beginning assembly. Keep this manual for future reference.
- WARNING: CHOKING HAZARD – Small parts. Not suitable for children under 3 years.
- Recommended for ages 12 and up.
- Keep all small parts away from young children and pets to prevent accidental ingestion.
- Dispose of packaging materials responsibly.
3. Package Contents
Your FOCO BRXLZ 3D Football Model package should contain the following items:
- Approximately 687 interlocking plastic brick pieces.
- One (1) sheet of team logo stickers.
- One (1) instruction booklet (this manual).
If any parts are missing or damaged, please contact customer support.
4. Setup and Assembly Instructions
Assembly of the BRXLZ 3D Football Model requires patience and attention to detail. Follow these steps carefully:
- Unpack and Sort: Carefully open the package and empty all brick pieces onto a clean, flat surface. It is highly recommended to sort the bricks by color and shape before beginning assembly. This will significantly aid in the building process.
- Review Diagram: Refer to the included visual diagrams (similar to Image 4.1) to understand the base layer and overall structure. The model is built layer by layer.
- Build Layer by Layer: Begin with the base layer as indicated in the instructions. Each subsequent layer interlocks with the one below it. Ensure each brick is firmly pressed into place to create a stable structure.
- Pattern Recognition: Pay close attention to the color patterns to accurately recreate the football design. The Real Madrid CF logo will form as you build specific sections.
- Apply Stickers: Once the 3D football structure is complete, carefully apply the Real Madrid CF team logo stickers to the designated areas on the model. Ensure the surface is clean and dry before application for best adhesion.
- Final Check: After assembly, gently inspect the entire model to ensure all bricks are securely connected and the structure is stable.
Image 4.1: Example of brick layout before assembly, showing the pattern.
Patience is key during assembly. If a section is difficult, re-examine the instructions and diagrams.
5. Display and Use
Once assembled, your FOCO Real Madrid CF BRXLZ 3D Football Model is ready for display. It is designed as a decorative item and collectible.
- Place the model on a flat, stable surface to prevent it from falling.
- Avoid placing it in direct sunlight for extended periods to prevent potential fading of colors or stickers.
- This model is not intended for active play due to its intricate brick construction.
Image 5.1: Detailed view of the assembled BRXLZ football model with club logo.
6. Care and Maintenance
To keep your BRXLZ 3D Football Model in excellent condition, follow these simple maintenance guidelines:
- Cleaning: Dust the model regularly with a soft, dry cloth or a soft brush. For more stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture, especially around stickers.
- Avoid Chemicals: Do not use harsh chemical cleaners, abrasive materials, or solvents, as these can damage the plastic bricks or fade the stickers.
- Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss and protect them from dust.
7. Troubleshooting
Here are solutions to common issues you might encounter during assembly or use:
| Problem | Solution |
|---|---|
| Missing or damaged pieces. | Carefully check all packaging materials. If pieces are genuinely missing or damaged, contact FOCO customer support for replacements. |
| Difficulty connecting bricks. | Ensure bricks are correctly oriented and aligned. Apply firm, even pressure. Some bricks may require a bit more force to snap into place. Do not force excessively to avoid breakage. |
| Model is unstable or falls apart. | Review previous steps to ensure all bricks are properly interlocked. Reassemble any loose sections. Ensure the model is placed on a flat, stable surface. |
| Stickers not adhering properly. | Ensure the surface is clean and dry before application. Press firmly from the center outwards to remove air bubbles. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | PZLL3DFB |
| Brand | FOCO |
| Material | Plastic |
| Assembled Dimensions (Approx.) | 10 x 10 x 10 cm (L x W x H) |
| Weight (Approx.) | 125 g |
| Number of Pieces | 687 |
| Recommended Age | 12 years and older |
| Assembly Required | Yes |
| Batteries Required | No |
| Special Features | Pixelated 3D construction, club logo sticker |
Image 8.1: Approximate dimensions of the assembled model.
9. Product Video
Watch an official video showcasing the Real Madrid CF product line, which includes BRXLZ items.
Video 9.1: Official product video for Real Madrid CF merchandise, including BRXLZ items. This video provides a general overview of Real Madrid CF branded products by FOCO.
10. Warranty Information
FOCO products are manufactured to high-quality standards. Specific warranty details for this BRXLZ model are not provided in this manual. For information regarding potential warranties or guarantees, please refer to the product packaging or contact FOCO customer support directly.
11. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact FOCO customer support.
- Manufacturer: FOCO
- Website: Please visit the official FOCO website for contact information and support resources.
- Online Retailer Support: For purchase-related inquiries, please contact the retailer from whom you purchased the product.



