Introduction
This manual provides essential instructions for the safe and effective use of your Enjoyedled Christmas Laser Lights Outdoor Projector. Please read this guide thoroughly before installation and operation to ensure proper functionality and safety.
Important Safety Instructions
WARNING: This is a Class II laser product. Avoid direct eye exposure to the laser beam.
- Do not attempt to open or modify the device.
- Keep out of reach of children.
- Ensure the power adapter is connected to a waterproof outlet when used outdoors.
- Do not submerge the device in water or other liquids.
- Disconnect power before cleaning or maintenance.
- Maintain a sufficient distance from heat sources.
- Do not place heavy objects on the article or its cable.
Package Contents
Verify that all items listed below are included in your package:
- 1 × Laser light projector
- 1 × Ground stake
- 1 × Indoor base
- 1 × RF Remote control
- 1 × Power supply transformer
- 1 × User manual
Image: All components included in the Enjoyedled Christmas Laser Lights package.
Installation Guide
Outdoor Installation (Ground Stake)
Image: Step-by-step visual guide for attaching the ground stake and positioning the projector outdoors.
- Attach the ground stake to the projector unit by aligning the screw hole and tightening the knob.
- Insert the assembled projector firmly into the ground in your desired outdoor location.
- Adjust the projection angle by loosening the side screw, tilting the projector, and then tightening the screw.
Indoor Installation (Indoor Base)
Image: Step-by-step visual guide for attaching the indoor base and positioning the projector indoors.
- Attach the indoor base to the projector unit by aligning the screw hole and tightening the knob.
- Place the projector on a flat, stable surface indoors.
- Adjust the projection angle by loosening the side screw, tilting the projector, and then tightening the screw.
Power Connection
Video: Demonstrates connecting the power supply transformer to the projector and plugging it in.
- Connect the power supply transformer to the projector's power cable. Ensure a secure connection.
- Plug the power adapter into a suitable electrical outlet. For outdoor use, ensure the outlet is weatherproof.
Operating Instructions
Remote Control Setup
Image: The RF remote control with clearly labeled buttons for various functions.
- Insert two AAA batteries into the remote control (batteries not included).
Power On/Off
- Press the Power button (red button with power symbol) to turn the projector on or off.
Color Selection
Image: Visual representation of the 7 available color combinations.
- Press the RGB button to cycle through 7 color combinations: Red, Green, Blue, Red/Green, Red/Blue, Blue/Green, and Red/Green/Blue.
Mode Selection
- Press AUTO for automatic cycling through colors and patterns.
- Press FLASH for a flashing light effect.
Speed Adjustment
- Use + SPEED and - SPEED buttons to adjust the rotation speed of the projected patterns.
- Press the Play/Pause button to pause or resume the motion of the patterns.
Timer Function
- Select desired operating time: 0.5H (30 minutes), 3H (3 hours), 5H (5 hours), or 8H (8 hours). The projector will automatically turn off after the set time and restart at the same time the next day.
- Press RESET to cancel the timer function.
Video: Detailed instructions on how to use the remote control for various functions including color, speed, and timer settings.
Placement and Coverage
The projection distance affects the coverage area and brightness. Refer to the table below for guidance:
| Distance to Surface | Coverage Area |
|---|---|
| 10 feet | 226 sq. ft |
| 15 feet | 506 sq. ft |
| 20 feet | 883 sq. ft |
| 25 feet | 1378 sq. ft |
| 30 feet | 2002 sq. ft |
| 35 feet | 2690 sq. ft |
| 40 feet | 3564 sq. ft |
For optimal brightness and clarity, ensure the projection surface is dark and free from other light sources. The remote control offers a 33ft long-range signal for convenient operation.
Image: The laser projector illuminating a house with colorful star patterns.
Maintenance
- To maintain optimal performance, keep the laser aperture clean. Use a soft, dry cloth to gently wipe the lens.
- Do not use corrosive or abrasive cleaning agents.
- Store the projector in a dry, cool place when not in use for extended periods.
- In extreme weather conditions (e.g., heavy snow, strong winds), consider bringing the unit indoors to prevent damage.
Troubleshooting
- No lights projected:
- Ensure the power adapter is securely connected and plugged into a working outlet.
- Check if the remote control batteries are correctly inserted and have sufficient charge.
- Verify the projector is turned on using the remote.
- Remote control not responding:
- Replace the AAA batteries in the remote control.
- Ensure there are no obstructions between the remote and the projector.
- The remote has a maximum range of 33 feet; ensure you are within this distance.
- Lights are dim or unclear:
- Ensure the projection surface is dark. Ambient light can reduce visibility.
- Clean the laser aperture with a soft cloth.
- Adjust the projection distance; moving closer to the surface will increase brightness but decrease coverage.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | LPS-GD-03RG |
| Color | RGB (Red, Green, Blue) |
| Material | Plastic |
| Product Dimensions | 5.1"L x 3.3"W x 7.1"H |
| Item Weight | 1.17 pounds |
| Control Mode | RF Remote Control |
| Input Voltage | 100-240V, 50/60Hz |
| Power Cord Length | 10 feet |
| UPC | 683125783876 |
Warranty and Customer Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Enjoyedled website. Keep your purchase receipt for warranty claims.