SCULPFUN S9 Laser Engraver with TS1 Touch Screen User Manual

Introduction

This manual provides essential information for the safe and effective operation of your SCULPFUN S9 Laser Engraver and TS1 Touch Screen. Please read this manual thoroughly before assembly and operation to ensure proper usage and to prevent damage or injury.

Image: The SCULPFUN S9 Laser Engraver with its frame, laser module, control box, and the separate TS1 Touch Screen. Various engraved and cut samples are also shown, including a wooden ornament, a metal tag, and a wooden model car.

Safety Information

Adherence to the following safety guidelines is crucial for preventing injury and ensuring safe operation:

• Always install the laser protective cover when operating the laser engraving machine. If not properly installed, wear protective goggles.
• Do not touch the laser with bare hands during operation, as this may cause burns.
• Avoid strong impacts to the machine.
• This product is not intended for use by children under 14 years of age. Adult supervision is required for users over 14 years of age.
• Never apply the laser directly to specular (reflective) objects, as this can cause injury to the operator or damage the laser.
• The laser module is a Class IV laser. Exercise extreme caution.

Package Contents

Verify that all components listed below are present in your package:

• 1 x X-axis component
• 2 x X profiles
• 2 x Y profiles
• 1 x Control box component
• 3 x Supporting legs
• 1 x Laser component
• 1 x 12V 5A power adapter
• 1 x Power cord
• 1 x USB cable
• 1 x Step 1-5 screw mounting kit
• 2 x Belts
• 1 x T-type M5 Hexagon socket screwdriver
• 1 x L-type M4 Hexagon socket screwdriver
• 1 x L-type M3 Hexagon socket screwdriver
• 1 x 8-10mm screw wrench
• 10 x Ribbons
• 1 x Brush
• 1 x Laser protective goggles
• 1 x 3mm thick 10x10cm wood chip
• 1 x 10mm thick 10x10cm wood chip
• 1 x A4 size steel tabletop protective pad
• 1 x Touch Screen (TS1)
• 1 x Power Cable (for TS1)
• 1 x SD Card (for TS1)
• 1 x Card Reader (for TS1)
• 1 x User Manual (printed)

Setup and Assembly

The SCULPFUN S9 is designed for straightforward assembly. Detailed step-by-step instructions are provided in the included printed user manual. General steps involve:

1. Unpacking all components and verifying against the package contents list.
2. Assembling the X and Y axis profiles to form the frame.
3. Mounting the control box and supporting legs.
4. Attaching the laser module to the X-axis component.
5. Connecting all necessary cables, including power and USB.
6. Installing the laser protective cover.

The all-metal frame design contributes to stability and durability. Fixed holes are provided for securing the machine and managing cables. Assembly typically takes 10-20 minutes.

Operating Instructions

Laser Module Overview

Image: Close-up of the SCULPFUN S9 laser module, highlighting its internal components and the "Laser Beam Shaping Technology" for enhanced cutting and engraving performance. The image also mentions 90W CO2 laser effect, 15mm wood cutting, 10mm acrylic cutting, ultra-thin 0.1mm engraving line, and engraving steel/ceramics.

The S9 laser engraver utilizes a 5.5-6W diode laser module with a 0.06mm ultra-thin laser focus. This design provides higher energy density for effective cutting and engraving. The laser features a fixed focus design with a sliding mechanism for easy adjustment.

Image: A diagram comparing the S9 laser beam with an ordinary square laser. The S9 laser shows a thinner beam and a longer effective energy range, resulting in higher energy density and stronger cutting ability, while the ordinary laser has a thicker beam and lower energy density.

The laser module's purple filter cover is designed to protect the user's eyes and prevent accidental contact with the laser point. For optimal safety, always use the provided laser protective goggles.

Image: This image displays three key features: a circular protective cover for eye protection, examples of materials the laser can process (ceramics, acrylic, steel), and a fixed-focus laser with an easy-sliding design for height adjustment.

Engraving and Cutting Capabilities

The S9 laser engraver is capable of processing a variety of materials:

• Engraving Materials: Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, dark stone.
• Cutting Materials: Wood (up to 15mm thick), acrylic board (up to 10mm thick), cardboard, non-woven fabric, bamboo, some plastic boards.

Image: Demonstrates the cutting capabilities of the SCULPFUN S9, showing precise cuts through 15mm thick wood, 10mm thick plywood, and 10mm thick acrylic, with measurements confirming the thickness.

The engraving accuracy is 0.01mm, and the ultra-fine engraving line is approximately 0.08mm, allowing for detailed and clear results.

Software Compatibility

The SCULPFUN S9 is compatible with various engraving software:

• LaserGRBL
• LightBurn
• Benbox
• GrblController
• LiteFire

It supports Windows and MAC operating systems (LightBurn is compatible with MAC). Supported file formats include NC, BMP, JPG, PNG, DXF, SVG, G-Code, and others. Data transfer is primarily via USB connection.

Image: A graphic illustrating the broad compatibility of the SCULPFUN S9 with various operating systems (Windows, MAC) and software (LaserGRBL, LightBurn). It also lists supported file formats such as JPG, PNG, TIF, AI, SVG, DXF, BMP, PDF, and NG.

TS1 Touch Screen Operation

Image: The SCULPFUN TS1 Touch Screen, a 3.5-inch capacitive screen, shown next to the S9 engraver. Icons on the screen indicate control, carving, and setup functions. Features like WiFi Function and Wide Compatibility are highlighted.

The SCULPFUN TS1 touch screen enhances the functionality of the S9 engraver by providing offline engraving and WiFi connectivity. It features a 3.5-inch capacitive touch screen with a resolution of 480*320.

• Offline Engraving: Copy your engraving files to the provided SD card, insert it into the TS1, and initiate engraving jobs directly from the touch screen without needing a computer connection.
• WiFi Functionality: The TS1 enables WiFi connectivity for the laser engraver. When used with the SCULPFUN mobile application, this allows for wireless control and the creation of engraving files directly from your smartphone.

To connect the TS1, simply connect a USB cable from the S9 engraving machine to the touch screen.

Image: The SCULPFUN TS1 Touch Screen connected to the S9 engraver via a blue USB cable, demonstrating its WiFi functionality. A smartphone screen is shown wirelessly interacting with the engraver via a mobile app, allowing for control and file creation.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 Laser Engraver and TS1 Touch Screen:

• Cleaning the Laser Lens: Periodically inspect and gently clean the laser lens using a soft, lint-free cloth and appropriate lens cleaning solution to maintain engraving precision.
• Frame and Rail Cleaning: Keep the machine's frame and guide rails free from dust and debris. Use the provided brush or a soft cloth to wipe down surfaces.
• Belt Tension: Check the tension of the timing belts. They should be taut but not overly tight. Adjust if necessary according to the detailed instructions in the printed manual.
• Cable Management: Ensure all cables are securely connected and routed away from moving parts to prevent wear and entanglement.
• Software Updates: Regularly check for software and firmware updates for both the engraver and the TS1 touch screen to benefit from performance improvements and new features.

Troubleshooting

This section addresses common issues you might encounter. For more complex problems, refer to the comprehensive troubleshooting guide in the printed manual or contact customer support.

• Laser Not Firing:
  • Check if the power cable is securely connected to both the machine and the power outlet.
  • Ensure the laser module is properly seated and its cable is connected.
  • Verify that the software settings (e.g., laser power, speed) are correctly configured.
  • Confirm that the protective cover is correctly installed or safety goggles are worn.
• Poor Engraving/Cutting Quality:
  • Adjust the laser focus. The S9 uses a fixed focus laser with a sliding device for adjustment.
  • Ensure the material is flat and securely placed on the working area.
  • Check software settings for appropriate power and speed for the specific material.
  • Clean the laser lens if it appears dirty.
• Machine Not Connecting to Computer/TS1:
  • Verify the USB cable connection. Try a different USB port or cable.
  • Ensure necessary drivers are installed on your computer.
  • For TS1, ensure the USB cable from the engraver is connected to the touch screen.
  • Restart both the engraver and the computer/TS1.
• TS1 WiFi Connection Issues:
  • Ensure the TS1 is within range of your WiFi network.
  • Verify the WiFi password and network settings on the TS1.
  • Restart your router and the TS1.

Specifications

Warranty and Support

The SCULPFUN S9 Laser Engraver comes with a one-year warranty. For technical support, inquiries, or warranty claims, please refer to the contact information provided in your printed user manual or visit the official SCULPFUN website. Support typically offers a 12-hour response time.