DREAME Trouver K10 Pro Wet Dry Vacuum Cleaner User Manual

Introduction

Thank you for choosing the DREAME Trouver K10 Pro Wet Dry Vacuum Cleaner. This versatile appliance is designed to simplify your cleaning routine by vacuuming and washing floors simultaneously. Featuring smart dirt detection, powerful suction, and a lightweight design, the K10 Pro is engineered for efficient and thorough cleaning on various surfaces. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new vacuum cleaner.

Image: The DREAME Trouver K10 Pro wet dry vacuum cleaner shown alongside a bottle of DREAME multi-surface floor cleaner.

Setup

1. Unpacking and Component Identification

Carefully remove all components from the packaging. Verify that all parts are present according to the packing list. Keep packaging materials for future storage or transport.

2. Assembly

1. Insert the handle into the main body of the vacuum cleaner until it clicks securely into place.
2. Ensure the clean water tank and dirty water tank are correctly seated in their respective compartments.

3. Initial Charging

Before first use, fully charge the vacuum cleaner. Place the unit on its charging dock. The LED display will indicate charging status. A full charge typically takes several hours.

4. Filling the Clean Water Tank

Open the clean water tank cap. Fill the tank with clean tap water. For enhanced cleaning performance, add the recommended amount of DREAME multi-surface floor cleaner solution. Do not exceed the 'MAX' fill line. Securely close the cap.

Operating Instructions

1. Powering On/Off

Press the power button located on the handle to turn the vacuum cleaner on or off.

2. Operating Modes

The K10 Pro features smart dirt detection and adjusts suction power automatically. You can also manually select modes:

• Auto Mode: Automatically adjusts suction and water flow based on detected dirt levels.
• Suction Mode: For vacuuming liquids without washing.
• Turbo Mode: Provides maximum suction for heavily soiled areas.

Image: A close-up of the DREAME Trouver K10 Pro's LED display showing different cleaning modes (Auto, Suction, Turbo) and the smart dirt detection feature indicating dirt levels.

3. Cleaning Performance

The K10 Pro utilizes a 120,000RPM motor and 15kPa suction power to effectively clean wet and dry messes. Its lightweight design (8.38lbs) and forward propulsion system make it easy to maneuver.

Image: A person operating the DREAME Trouver K10 Pro on a hard floor with spilled liquid and debris, illustrating its 120,000 RPM motor and 15kPa vacuum power.

4. Runtime

The vacuum cleaner provides up to 30 minutes of continuous cleaning on a single charge, allowing for extended cleaning sessions without interruption.

Image: A person cleaning a hard floor with the DREAME Trouver K10 Pro, highlighting its 30-minute cleaning runtime.

5. Edge Cleaning

The K10 Pro features a specialized brush and twin scraper design that allows for effective cleaning within 6mm of edges and corners, ensuring comprehensive coverage.

Image: A series of close-up images demonstrating the DREAME Trouver K10 Pro's ability to clean close to edges and walls, highlighting its 0.24-inch edge cleaning feature.

6. Voice Prompts and LED Display

The integrated voice prompts and LED display provide real-time information on battery status, cleaning mode, and maintenance alerts, keeping you informed during operation.

7. Multi-Surface Use

The DREAME Trouver K10 Pro is suitable for use on various sealed hard floor surfaces, including marble, wood, tile, and stone.

Image: An illustration showing the DREAME Trouver K10 Pro cleaning across different floor types such as marble, wood, hard floor, tile, and stone, emphasizing its multi-surface compatibility.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your DREAME Trouver K10 Pro.

1. Emptying the Dirty Water Tank

After each use, or when the dirty water tank is full, remove it from the unit and empty its contents. Rinse the tank thoroughly with clean water and allow it to air dry before reinserting.

2. Cleaning the Brush Roll

The brush roll should be cleaned regularly, especially if hair tangles are present. The K10 Pro's design with a twin scraper helps with hair detangling. Remove the brush roll cover, take out the brush roll, and clean any debris or hair. Rinse under running water if necessary and ensure it is completely dry before reinstallation.

3. Self-Wash Function

Place the vacuum cleaner on its charging dock. Activate the self-wash function (refer to the LED display or voice prompts for instructions). This function cleans the brush roll and internal pathways, reducing manual cleaning effort.

4. Cleaning the Clean Water Tank

Periodically rinse the clean water tank to prevent residue buildup, especially if using cleaning solutions.

5. Filter Maintenance

Locate and remove the filter. Tap it gently to remove dust and debris. If washable, rinse under cold water and allow it to air dry completely for at least 24 hours before reinserting. Do not operate the vacuum without a dry filter.

Troubleshooting

If you encounter issues with your DREAME Trouver K10 Pro, refer to the following common solutions:

• No Power: Ensure the unit is fully charged. Check if the power button is pressed firmly.
• Poor Suction: Check if the dirty water tank is full and needs emptying. Inspect the brush roll for obstructions or tangles. Ensure the filter is clean and properly installed.
• Water Leaks: Verify that both the clean and dirty water tanks are correctly seated and their caps are securely closed. Check for any cracks or damage to the tanks.
• Unusual Noise: Turn off the unit and check the brush roll and air pathways for any foreign objects.
• Error Codes/Voice Prompts: Pay attention to the LED display and voice prompts, as they often indicate specific issues or maintenance requirements. Consult the full manual for a list of error codes if available.

If problems persist, please contact DREAME customer support.

Specifications

Warranty and Support

For warranty information, product registration, or technical support, please refer to the warranty card included with your product or visit the official DREAME website. Keep your purchase receipt as proof of purchase for warranty claims.

DREAME Official Website: www.dreame-tech.com