Donerton I66
Donerton I66 Wireless Earbuds User Manual
Model: I66
Introduction
Thank you for choosing Donerton I66 Wireless Earbuds. This manual provides detailed instructions on how to set up, operate, and maintain your earbuds to ensure the best possible audio experience. Please read this manual thoroughly before using the product.
Package Contents
- Donerton I66 Wireless Earbuds (Left and Right)
- Charging Case
- User Manual
- USB-C Charging Cable
- S/M/L Eartips (3 different sizes)
Image: Contents of the Donerton I66 Wireless Earbuds package.
Product Overview
The Donerton I66 Wireless Earbuds feature Bluetooth 5.4 for stable connections, 13mm drivers for immersive stereo sound, and 4 ENC microphones for clear calls. They offer up to 45 hours of total playtime with the charging case and are IP7 waterproof.
Image: Donerton I66 Wireless Earbuds and Charging Case.
Setup
1. Initial Charging
Before first use, fully charge the earbuds and the charging case. Connect the USB-C charging cable to the charging case and a power source. The LED display on the case will show the charging progress. A full charge takes approximately 1.5 hours for the case.
Image: LED Power Display on the Charging Case.
2. Pairing with Your Device
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for "i66" in the list of available Bluetooth devices and select it to connect.
- Once successfully paired, the earbuds will automatically reconnect to your device when you open the charging case in the future.
Image: One-Step Pairing Process.
3. Wearing the Earbuds
Choose the correct size of eartips (S/M/L) for a comfortable and secure fit. Insert the earbuds into your ears and gently rotate them until they feel snug and stable.
Image: Ergonomic Design and Eartip Selection.
Operating Instructions
Touch Controls
The Donerton I66 earbuds feature intuitive touch controls on each earbud. Refer to the table below for common functions:
| Function | Action | Earbud |
|---|---|---|
| Play/Pause | Tap once | Left or Right |
| Previous Song | Press and hold for 1 second | Left |
| Next Song | Press and hold for 1 second | Right |
| Volume Down | Double-tap | Left |
| Volume Up | Double-tap | Right |
| Answer Call | Tap once | Left or Right |
| Hang Up Call | Tap once | Left or Right |
| Reject Call | Long press | Left or Right |
| Activate Voice Assistant | Triple-tap | Left or Right |
Image: Smart Touch Control Functions.
Volume Adjustment Video
Video: This video demonstrates how to adjust the volume using the touch controls on the Donerton I66 Bluetooth 5.4 earbuds. It shows the interaction with the earbuds to increase or decrease volume.
Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove eartips and clean them with mild soap and water if necessary. Ensure they are completely dry before reattaching.
- Do not use abrasive cleaners or solvents.
Storage
When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.
Water Resistance (IP7)
The earbuds are IP7 waterproof, meaning they can withstand immersion in water up to 1 meter for 30 minutes. This makes them suitable for use during exercise or in light rain. However, the charging case is not waterproof. Avoid exposing the charging case to water.
Image: IP7 Waterproof Feature.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing | Bluetooth off, out of range, or previously paired to another device. | Ensure Bluetooth is on and within range. Forget "i66" on your device's Bluetooth settings and try pairing again. Ensure earbuds are charged. |
| No sound from one earbud | Low battery, not properly paired, or connection issue. | Place both earbuds back in the charging case, close the lid, then open it again. Re-pair if necessary. Ensure both earbuds are charged. |
| Earbuds not charging | Charging cable issue, dirty charging contacts, or case battery low. | Check USB-C cable and power source. Clean charging contacts on earbuds and case with a dry cotton swab. Ensure charging case is charged. |
| Poor sound quality | Earbuds not properly seated, dirty eartips, or interference. | Adjust earbuds for a snug fit. Clean eartips. Move away from sources of strong electromagnetic interference. |
| Touch controls unresponsive | Temporary software glitch or dirty touch sensor. | Place earbuds back in case, close and open. Clean the touch sensor area on the earbuds. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | I66 |
| Bluetooth Version | 5.4 |
| Connectivity Technology | Wireless (Bluetooth) |
| Driver Size | 13mm |
| Microphones | 4 ENC Mics |
| Earbud Playtime | 6-8 hours per charge |
| Total Playtime (with case) | Up to 45 hours |
| Charging Time (Case) | Approx. 1.5 hours (USB-C) |
| Water Resistance Rating | IP7 (Earbuds only) |
| Control Method | Touch |
| Compatible Devices | iOS, Android cellphones, tablets, laptops, TV, etc. |
| Material | Plastic |
| Item Weight | 3.2 ounces |
Warranty and Support
For warranty information and customer support, please refer to the official Donerton website or contact the seller directly through your purchase platform. Keep your proof of purchase for warranty claims.
Manufacturer: Donerton
Seller: Donerton-US
For further assistance, please visit the Donerton Store on Amazon.
Related documentsI66
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.