OOWOLF LED Pendant Light User Manual

1. Introduction

Thank you for choosing the OOWOLF 40W LED Pendant Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Designed for various indoor environments such as offices, living rooms, dining areas, and garages, this 110cm pendant light delivers a focused, soft, and flicker-free 4000K neutral white illumination, ensuring comfort and reducing eye strain during prolonged use.

Image 1.1: The OOWOLF LED Pendant Light installed above a dining table, providing bright and even illumination.

Image 1.2: The OOWOLF LED Pendant Light providing focused lighting in a modern office setting.

2. Safety Instructions

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or cleaning.
• Installation should be performed by a qualified electrician or a competent person.
• This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
• Ensure the mounting surface can support the weight of the fixture.
• Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
• Keep packaging materials out of reach of children.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.

• OOWOLF LED Pendant Light (1 unit)
• Mounting Bracket (1 unit)
• Suspension Cables (2 units)
• Ceiling Canopy/Base (1 unit)
• Screws and Wall Anchors (set)
• Wire Connectors (set)
• Instruction Manual (this document)

Image 3.1: All components included in the OOWOLF LED Pendant Light package, including the light fixture, mounting hardware, and instruction manual.

4. Installation

The OOWOLF LED Pendant Light offers two primary installation methods: direct ceiling mount or suspended mount. Choose the method that best suits your space and desired aesthetic.

4.1. General Installation Steps

1. Turn off power at the circuit breaker before starting.
2. Mark the drilling points on the ceiling according to the mounting bracket.
3. Drill holes and insert wall anchors.
4. Secure the mounting bracket to the ceiling using screws.
5. Connect the electrical wires (Live, Neutral, Ground) from the ceiling to the fixture's wires using wire connectors. Ensure connections are secure.

4.2. Suspended Mount (Adjustable Height)

This method allows you to adjust the hanging height of the light from 15 cm to 90 cm.

1. Attach the suspension cables to the fixture and the ceiling canopy.
2. Feed the suspension cables through the adjustable mechanisms on the ceiling canopy.
3. To adjust height, press the small button on the cable gripper (as shown in Image 4.2) and slide the cable to the desired length. Release the button to lock the cable in place.
4. Once the desired height is set, secure the ceiling canopy to the mounting bracket.

4.3. Direct Ceiling Mount

For a flush-to-ceiling installation, the suspension cables can be omitted or shortened significantly, and the fixture can be mounted directly to the ceiling bracket.

Image 4.1: Detailed dimensions of the OOWOLF LED Pendant Light (110cm length, 4cm height, 6cm width) and illustration of adjustable suspension height (15-90cm).

Image 4.2: Illustration of the adjustable height mechanism. Press the button to slide the cable and release to fix the height.

5. Operating Instructions

Once properly installed and connected to the power supply, the OOWOLF LED Pendant Light operates via a standard wall switch. Simply toggle the switch to turn the light on or off.

Image 5.1: The OOWOLF light provides a comfortable, no-dazzle illumination, reducing eye fatigue compared to standard lighting.

Image 5.2: This diagram illustrates the focused light distribution of the OOWOLF pendant light, showing higher lux levels at a distance compared to a normal linear light, making it ideal for task lighting.

6. Maintenance

To ensure the longevity and optimal performance of your OOWOLF LED Pendant Light, follow these simple maintenance guidelines:

• Before cleaning, always turn off the light and disconnect power at the circuit breaker.
• Wipe the fixture with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Regularly check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.

7. Troubleshooting

If you encounter any issues with your OOWOLF LED Pendant Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact OOWOLF customer support.

8. Specifications

Image 8.1: The energy efficiency label for the OOWOLF LED Pendant Light, indicating an energy class of F.

9. Warranty and Support

For warranty information, technical support, or any inquiries not covered in this manual, please contact OOWOLF customer service through the retailer where the product was purchased or visit the official OOWOLF website. Please have your model number (IN9Y) and purchase details ready when contacting support.