Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your HOOBRO Queen Size Headboard with Charging Station and LED Light, and the accompanying LED Nightstands. Please read all instructions carefully before assembly and use to ensure safe and correct operation of the product.
Image: The HOOBRO Queen Size Headboard and Nightstands Bundle installed in a bedroom, showcasing the integrated LED lighting and charging features.
Safety Information
- Keep all small parts and packaging materials away from children and pets.
- Ensure all connections are secure before use. Loose connections can cause electrical hazards.
- Do not overload the electrical outlets or USB ports. Refer to specifications for maximum load.
- Avoid exposing the product to excessive moisture or direct sunlight.
- Use only the provided power cord and adapter.
- Do not attempt to modify or repair the electrical components. Contact customer support if issues arise.
- Place the furniture on a level surface to prevent tipping.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact HOOBRO customer service.
Headboard Components:
- Headboard panels
- Metal frame components
- Integrated charging station (2 AC outlets, 2 USB ports)
- LED light strip
- Remote control for LED light
- Assembly hardware (screws, bolts, Allen wrench)
- Power cord (4.9 ft)
Nightstand Components (x2):
- Nightstand panels
- Metal frame components
- Integrated charging station (2 AC outlets, 2 USB ports)
- LED light strip
- Remote control for LED light
- Assembly hardware (screws, bolts, Allen wrench)
- Power cord (4.9 ft)
Setup
1. Headboard Assembly
- Unpack all headboard components and lay them out on a clean, soft surface to prevent scratches.
- Attach the main headboard panels to the metal frame using the provided screws and Allen wrench. Ensure all connections are finger-tight before fully tightening.
- Secure the top shelf and any additional support bars to the frame.
- Integrate the charging station unit into its designated slot on the headboard.
- Affix the LED light strip to the underside of the top shelf or designated area, ensuring it is securely attached.
- Once all parts are assembled, fully tighten all screws and bolts.
Image: Diagram illustrating the dimensions of the HOOBRO Queen Size Headboard, including height, width, and shelf depth.
2. Nightstand Assembly
- Unpack all nightstand components for one unit and lay them out. Repeat for the second unit.
- Assemble the metal frame structure for each nightstand.
- Attach the wooden shelves to the metal frame using the provided hardware.
- Integrate the charging station unit into its designated slot on the top shelf of each nightstand.
- Affix the LED light strip to the underside of the top shelf or designated area of each nightstand.
- Once all parts are assembled, fully tighten all screws and bolts.
Image: Diagram illustrating the dimensions and weight capacities of the HOOBRO LED Nightstand, showing measurements for height, width, and shelf load limits.
3. Power Connection
- For the headboard, plug the integrated power cord into a standard wall outlet.
- For each nightstand, plug its integrated power cord into a standard wall outlet.
- Ensure the power cords are routed safely to avoid tripping hazards.
Operating Instructions
1. Charging Station Usage
Both the headboard and nightstands are equipped with a charging station.
- AC Outlets: Plug in devices requiring standard AC power (e.g., lamps, laptops). The headboard and nightstands each have 2 AC outlets (125V/12A for headboard, 120V/12A for nightstands).
- USB Ports: Connect USB-powered devices (e.g., smartphones, tablets) to the 2 USB ports (5V/2A) on each unit for charging.
Image: Close-up view of the headboard's integrated charging station, showing two AC outlets and two USB ports, with a device charging.
Image: Close-up view of a nightstand's integrated charging station, showing two AC outlets and two USB ports, with devices plugged in.
2. LED Light Operation (Headboard and Nightstands)
The LED light strips on both the headboard and nightstands are controlled by the included remote control.
- Power On/Off: Press the power button on the remote to turn the LED lights on or off.
- Color Selection: Use the color buttons on the remote to choose from 16 different colors.
- Brightness Adjustment: Adjust the brightness level using the brightness control buttons (6 levels available).
- Mode Selection: Cycle through 4 different lighting modes (e.g., flash, strobe, fade, smooth) using the mode buttons.
Image: The HOOBRO Queen Size Headboard with its RGB LED light strip illuminated, accompanied by an image of the remote control for color and mode selection.
Image: A HOOBRO LED Nightstand with its RGB LED light strip illuminated, showing the remote control for various lighting options.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Dusting: Regularly dust the headboard and nightstands to prevent buildup.
- Electrical Components: Ensure the charging stations and LED lights are free from dust and debris. Do not spray liquids directly onto electrical parts.
- Tightening: Periodically check and tighten all screws and bolts to maintain structural integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charging station not working | Power cord unplugged; Wall outlet not active; Device not properly connected; Overload. | Ensure power cord is securely plugged into a working outlet. Test the outlet with another device. Reconnect your device. Reduce the number of devices plugged in. |
| LED lights not turning on | Power cord unplugged; Remote control battery dead; LED strip connection loose. | Check power cord connection. Replace remote control battery. Ensure LED strip is properly connected to its power source. |
| Remote control not responding | Battery dead; Obstruction between remote and receiver; Remote too far. | Replace remote battery. Ensure clear line of sight to the LED receiver. Move closer to the LED strip. |
| Furniture feels wobbly | Loose screws/bolts; Uneven floor. | Check and tighten all assembly screws and bolts. Place on a level surface or use furniture pads to stabilize. |
Specifications
HOOBRO Queen Size Headboard (BB55UDBH01)
- Dimensions: 60.2" (W) x 44.1" (H) x 5.9" (D) (153cm x 112cm x 15cm)
- Material: Metal Frame, Engineered Wood
- Charging Station: 2 AC Outlets (125V/12A), 2 USB Ports (5V/2A)
- Power Cord Length: 4.9 ft
- LED Light: 16 Colors, 6 Brightness Levels, 4 Modes (Remote Controlled)
- Storage: 2 open shelves
HOOBRO LED Nightstands (BF112IDBZP201)
- Dimensions: 15" (W) x 21.7" (H) x 11" (D) (38cm x 55cm x 28cm)
- Material: Metal Frame, Engineered Wood
- Charging Station: 2 AC Outlets (120V/12A), 2 USB Ports (5V/2A)
- Power Cord Length: 4.9 ft
- LED Light: 16 Colors, 6 Brightness Levels, 4 Modes (Remote Controlled)
- Weight Capacity (Top Shelf): 44 lbs (20 kg)
- Weight Capacity (Middle Shelf): 22 lbs (10 kg)
- Weight Capacity (Bottom Shelf): 11 lbs (5 kg)
Warranty and Support
HOOBRO products are manufactured with quality and durability in mind. For specific warranty information, please refer to the warranty card included with your purchase or visit the official HOOBRO website. If you encounter any issues or have questions regarding your product, please contact HOOBRO customer support for assistance. Please have your model number (BB55UDBH01-BF112IDBZP201) ready when contacting support.
Contact Information: Please refer to your purchase documentation or the HOOBRO official website for the most current customer support contact details.