Introduction
This manual provides essential information for the safe and effective use of your GT POWER AC Adapter, designed specifically for the Proform Cadence R3.9 Recumbent Exercise Bike. Please read these instructions carefully before use and retain them for future reference.
Safety Information
- Do not expose the adapter to water or excessive moisture.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to open or modify the adapter.
- Ensure the adapter is used with the specified voltage and current requirements of your exercise bike.
- Unplug the adapter during lightning storms or when unused for long periods.
Product Overview
The GT POWER AC Adapter is a reliable power supply unit featuring built-in protection mechanisms to ensure the safety of your Proform Cadence R3.9 Recumbent Exercise Bike. It provides stable power for consistent performance.
Image: The GT POWER AC Adapter, showing the main unit and standard US plug.
Image: Close-up of the barrel plug connector, which connects to the exercise bike's power input.
Setup Instructions
- Identify Power Port: Locate the power input port on your Proform Cadence R3.9 Recumbent Exercise Bike. This is typically found near the base or console.
- Connect Adapter to Bike: Carefully insert the barrel plug of the GT POWER AC Adapter into the exercise bike's power input port. Ensure it is fully seated and secure.
- Connect Adapter to Wall Outlet: Plug the AC adapter's main unit into a standard 110V AC wall outlet. Ensure the outlet is functional and easily accessible.
- Verify Connection: Confirm that both ends of the adapter are securely connected.
Image: A Proform Cadence R3.9 Recumbent Exercise Bike, illustrating the typical location of the power input port.
Operating Instructions
Once the GT POWER AC Adapter is correctly connected to both the exercise bike and a power outlet, the exercise bike should receive power. Refer to your Proform Cadence R3.9 exercise bike's specific user manual for instructions on how to power on and operate the bike's console and features. The adapter provides continuous and stable power for the bike's electronic components.
Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid cleaners or aerosols.
- Cable Care: Avoid sharp bends, kinks, or excessive pulling on the power cable. Do not place heavy objects on the cable.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.
Image: The heavy-duty power cable of the GT POWER AC Adapter, designed for durability.
Troubleshooting
If you encounter issues with your GT POWER AC Adapter, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to the exercise bike. | Adapter not fully plugged in. Wall outlet is not functional. Bike's power switch is off. | Ensure the adapter is securely connected to both the bike and the wall outlet. Test the wall outlet with another device. Check the exercise bike's power switch. |
| Adapter feels hot. | Lack of ventilation. Overload or internal issue. | Ensure the adapter has adequate airflow. Unplug immediately if excessively hot. If overheating persists, discontinue use and contact support. |
| Bike powers off unexpectedly. | Activation of protection features (OVP, OCP, SCP). | The adapter's built-in Over Voltage, Over Current, or Short Circuit Protection may have activated. Disconnect the adapter from the wall and bike, wait a few moments, then reconnect. If the issue persists, contact support. |
Specifications
- Model Number: 108
- Input Voltage: 110 Volts (AC)
- Output Current: 3 Amps
- Connector Type: Barrel Plug
- Cable Length: Approximately 79 inches
- Compatible Devices: Proform Cadence R3.9 Recumbent Exercise Bike (PFEX61719 and All R3.9 Series)
- Special Features: Over Voltage Protection (OVP), Over Current Protection (OCP), Short Circuit Protection (SCP)
- Manufacturer: PowerTech (Brand: GT POWER)
Image: The product label on the AC adapter, detailing input/output specifications and model information.
Warranty Information
This GT POWER AC Adapter is covered by a one-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use. For warranty claims or service, please contact the seller or manufacturer with your proof of purchase.
Customer Support
For any questions, technical assistance, or support regarding your GT POWER AC Adapter, please reach out to your retailer or the manufacturer directly. You can often find contact information on the product packaging or the online product listing where you made your purchase.
