Introduction
This manual provides instructions for the safe and effective use of your FITE ON USB Charger Cable Cord. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Instructions
- Do not expose the cable to water or excessive moisture.
- Do not attempt to disassemble or modify the cable.
- Keep out of reach of children.
- Use only with compatible devices as specified in this manual.
- Disconnect the cable from the power source when not in use.
- If the cable is damaged, discontinue use immediately.
Product Overview
The FITE ON USB Charger Cable Cord consists of a standard USB-A connector on one end and a two-prong charging connector on the other, designed for specific water flossers.
Key Features
- Robust Casing: Designed for durability.
- Fastener Tape: For organized storage.
- Longer Wire: Provides extended reach.
- High Quality Wire: Durable construction with internal protection against over-temperature, over-voltage, over-current, and over-circuit conditions.
Setup
Connecting the Charger Cable
- Identify the charging port on your compatible water flosser. This is typically a two-hole port.
- Insert the two-prong connector of the FITE ON USB Charger Cable into the charging port of your water flosser. Ensure a secure fit.
- Connect the USB-A end of the cable to a suitable 5V USB power source. This can be a USB wall adapter, power bank, car charger, or computer USB port.
Operating Instructions
Charging Your Device
Once connected to a power source, your water flosser should begin charging. Refer to your water flosser's instruction manual for specific charging indicators (e.g., LED lights).
The cable is designed for efficient power transfer to ensure your device charges reliably.
Compatibility
Compatible Devices
This FITE ON USB Charger Cable Cord is compatible with the following cordless water flosser models:
- MOSPRO Water Flosser
- Nicefeel Water Flosser
- Zerhunt Water Flosser
- McNaval Water Flosser
- Cremax Water Flosser
- Specific models: FC159, FC1591, FC2630, FC2631, FC156, FC152
Please verify your device's charging port and model number before use to ensure compatibility.
Maintenance and Care
Care and Storage
- Clean the cable with a dry, soft cloth. Do not use liquid cleaners.
- Avoid bending the cable sharply or placing heavy objects on it.
- Store the cable in a cool, dry place when not in use. Use the fastener tape to keep it neatly coiled.
- Regularly inspect the cable for any signs of damage, such as frayed wires or bent connectors.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging | Cable not fully connected | Ensure both ends of the cable are securely plugged in. |
| Device not charging | Power source issue | Try a different USB power adapter or port. |
| Device not charging | Incompatible device | Verify your water flosser model is listed as compatible. |
| Cable appears damaged | Physical stress or wear | Discontinue use immediately and replace the cable. |
If issues persist, contact customer support.
Specifications
Technical Specifications
- Input Voltage: 100-240VAC, 50/60Hz (from power source)
- Output: 5V (standard USB output)
- Color: Black
- Connector Type: USB-A to 2-prong charging connector
- Protection Features: Over-Voltage Protection (OVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP), Over-Temperature Protection
Warranty and Support
Warranty Information
FITE ON products are designed for reliability. For warranty details or technical support, please refer to the FITE ON official website or contact your retailer.
For further assistance, please visit: FITE ON Store on Amazon.