1. Introduction
Thank you for choosing the KINGSMITH 55x24 Inch Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new height-adjustable workstation. Please read this manual thoroughly before use and retain it for future reference.
This electric standing desk is designed to promote a healthier work environment by allowing seamless transitions between sitting and standing positions, enhancing comfort and productivity in your home or office.
2. Safety Instructions
- Ensure all components are securely fastened before use.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not overload the desk. The maximum weight capacity is 165 lbs (75 kg).
- Avoid placing liquids directly on the control panel or motor components.
- Disconnect power before cleaning or performing any maintenance.
- Do not attempt to modify the desk's structure or electrical system. Contact customer support for assistance.
- Ensure there are no obstructions in the desk's path during height adjustment.
3. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact KINGSMITH customer support.
- Desktop (55x24 inches)
- Desk Legs (2)
- Crossbar/Support Beam
- Control Panel
- Motor
- Power Adapter and Cable
- Hardware Kit (screws, bolts, Allen wrenches)
- Instruction Manual
4. Setup and Assembly
The KINGSMITH Electric Standing Desk is designed for straightforward assembly. Follow these steps carefully. An installation guide and assembly tools are included in the package.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Desk Legs: Secure the desk legs to the desktop using the provided screws. Ensure they are aligned correctly.
- Install Crossbar: Connect the crossbar between the two desk legs for stability.
- Mount Motor and Control Panel: Attach the motor and control panel to the designated areas under the desktop. Connect all necessary cables according to the wiring diagram in the included installation guide.
- Connect Power: Plug the power adapter into the motor and then into a wall outlet.
- Initial Calibration: Follow the specific calibration steps in your included installation guide to ensure proper height adjustment functionality. This usually involves lowering the desk to its lowest point and holding the down button for a few seconds.
Visual Aid: Assembled KINGSMITH Electric Standing Desk.
Image: The fully assembled KINGSMITH electric standing desk, showcasing its wooden top, white legs, and a typical office setup including a monitor and accessories.
5. Operating Instructions
5.1 Height Adjustment
The desk features an electric lifting system for smooth height adjustments. The height can be adjusted between 28.3 inches and 47.2 inches.
- Raise Desk: Press and hold the "Up" button on the control panel until the desired height is reached.
- Lower Desk: Press and hold the "Down" button on the control panel until the desired height is reached.
- The motor operates with low noise (less than 55 dB) and a lifting speed of 25mm/s.
Visual Aid: People using the standing desk in various positions.
Image: This image shows three different users interacting with the KINGSMITH standing desk at various heights, from a seated position to a full standing position, highlighting its ergonomic flexibility.
5.2 Using the Storage Drawer
The integrated pull-out drawer provides convenient storage for your office supplies, keeping your workspace tidy.
- To open the drawer, gently pull the front panel outwards.
- To close, push the drawer inwards until it is flush with the desk surface.
Visual Aid: Desk with its integrated drawer open.
Image: The KINGSMITH standing desk is shown with its discreet, integrated drawer pulled out, demonstrating its storage capability for small office items.
5.3 Operational Video Guide
For a visual demonstration of the desk's operation, including height adjustment and drawer usage, please refer to the video below.
Video: A demonstration of the KINGSMITH Electric Standing Desk's height adjustment mechanism and the functionality of its integrated drawer. This video is provided by the seller to guide users through the desk's features.
6. Maintenance
- Cleaning: Wipe the desk surface and legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
- Cable Management: Ensure all cables are neatly organized and not pinched or tangled, especially during height adjustments.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; motor error; overload. | Check power connection. Unplug and replug the desk. Reduce weight on the desk. Perform a reset (refer to calibration steps in section 4). |
| Uneven height adjustment. | Obstruction; uneven weight distribution. | Clear any obstructions. Redistribute weight evenly on the desktop. Perform a reset. |
| Unusual noise during operation. | Loose components; motor issue. | Check and tighten all screws. If noise persists, contact customer support. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact KINGSMITH customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | KINGSMITH |
| Model | B0D8QBJKY7 |
| Product Dimensions | 24"D x 55"W x 28.3"H |
| Adjustable Height Range | 28.3" - 47.2" |
| Maximum Weight Capacity | 165 Pounds (75 kg) |
| Motor Noise Level | < 55 dB |
| Lifting Speed | 25mm/s |
| Top Material Type | Engineered Wood |
| Base Material | Carbon Steel Frame |
| Assembly Required | Yes |
9. Warranty and Support
KINGSMITH provides a standard warranty for this product. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, missing parts, or warranty claims, please contact KINGSMITH customer service through the following channels:
- Website: Visit the official KINGSMITH website for support resources.
- Email: Refer to your warranty card for the customer support email address.
- Online Store: You can also reach out via the seller's contact information on the platform where you purchased the product.
Please have your purchase receipt and product model number (B0D8QBJKY7) ready when contacting support.
