ASHATA X6 Video Doorbell Camera User Manual

1. Introduction

Thank you for choosing the ASHATA X6 Video Doorbell Camera. This manual provides essential information for the proper installation, operation, and maintenance of your new video doorbell. Please read this manual thoroughly before use and retain it for future reference.

Product Features:

• 1080P HD Video: Clear video resolution for monitoring your doorstep.
• Two-Way Audio: Communicate with visitors remotely via your smartphone.
• Night Vision: Equipped with 850n infrared lamps for clear visibility in low-light conditions.
• Motion Detection: Receive instant alerts and photos on your phone when motion is detected.
• Real-Time Notifications: Get push notifications when the doorbell is pressed or motion is detected.
• Wireless Chime: Includes a slave unit with 38 selectable tones and 4 adjustable volume levels.
• Rechargeable Battery: Built-in 800mAh lithium battery for extended standby time.
• APP Sharing: Share doorbell access with multiple family members.

2. Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or moisture.
• Use only the provided charging cable and power adapter (if applicable) to charge the device.
• Keep the device away from children and pets.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Ensure proper installation to prevent the device from falling.

3. Product Overview and Package Contents

Package Contents:

Before installation, please verify that all items listed below are present in your package:

• 1 x Video Doorbell Host (Camera Unit)
• 1 x Video Doorbell Slave (Wireless Chime)
• 1 x Charging Cable (USB)
• 1 x Double-Sided Tape
• 1 x Hole Installation Panel
• 1 x User Manual (This document)
• 1 x Ejector Pin
• 2 x Screws
• 2 x Wall Plugs

Image: All components included in the ASHATA X6 Video Doorbell Camera package, including the doorbell unit, wireless chime, charging cable, mounting hardware, and ejector pin.

Key Components:

Image: Diagram highlighting key features of the ASHATA X6 Video Doorbell Camera, including HD pixel camera, rechargeable lithium battery, 850 infrared night vision lamp, doorbell press to capture image, doorbell call response, APP video call, 3M strong adhesive, WiFi connection, and multiple security guarantees.

4. Setup and Installation

4.1 Charging the Doorbell Host

Before initial use, fully charge the Video Doorbell Host using the provided USB charging cable. Connect the cable to the doorbell's charging port and a standard USB power adapter (not included). The LED indicator will show charging status.

4.2 App Download and Pairing

1. Download the dedicated mobile application (APP) from your smartphone's app store. Search for "ASHATA Smart" or refer to the QR code in the quick start guide (if provided separately).
2. Register for an account and log in.
3. Follow the in-app instructions to add your ASHATA X6 Video Doorbell. This typically involves powering on the doorbell, resetting it if necessary, and connecting it to your 2.4GHz Wi-Fi network.
4. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network during the pairing process.

4.3 Chime Setup

Plug the Video Doorbell Slave (chime unit) into a standard wall outlet within range of your doorbell host. The chime will automatically pair with the doorbell. You can select from 38 different tones and adjust the volume using the buttons on the chime unit.

Image: The wireless chime unit, highlighting its 38 stereo chimes, 4 adjustable volume levels, and LED indicator.

Image: A visual representation of the ASHATA X6 wireless chime's 4 volume levels, ranging from 0dB (mute) to 110dB, suitable for various environments.

4.4 Doorbell Installation

The doorbell can be installed using either double-sided tape or screws for a more secure mounting.

Option 1: Double-Sided Tape Installation

1. Clean the desired installation surface thoroughly to ensure it is dry and free of dust or grease.
2. Apply the provided double-sided tape to the back of the doorbell host.
3. Press the doorbell firmly onto the chosen surface for at least 30 seconds.

Option 2: Screw Installation (Recommended for long-term security)

1. Position the Hole Installation Panel on the wall at the desired height.
2. Mark the screw holes through the panel.
3. Drill pilot holes at the marked locations. Insert the wall plugs into the drilled holes.
4. Secure the Hole Installation Panel to the wall using the provided screws.
5. Attach the doorbell host to the installed panel, ensuring it clicks securely into place.

Image: Diagram illustrating the ultra-long wireless range of the ASHATA X6 Video Doorbell Camera and its chime, showing signal penetration through walls for reliable connection within a home environment.

Image: Comparison of wireless transmission range, indicating the ASHATA X6 offers an upgraded transmission module with a range of up to 328ft (100m), significantly longer than typical devices (100ft / 30-50m).

5. Operating Instructions

5.1 Receiving Notifications and Video Calls

When a visitor presses the doorbell, your smartphone will receive a push notification. Tap the notification to enter the video call interface and view the live feed from the doorbell camera. You can then choose to answer or ignore the call.

5.2 Two-Way Audio Communication

During a video call, use the microphone and speaker icons within the app to enable two-way communication with the visitor at your door.

Image: A user interacting with the ASHATA X6 Video Doorbell via the mobile app, demonstrating the video playback and the option to change voice during a call for privacy or security.

5.3 Motion Detection and Alerts

The doorbell's infrared sensors detect movement within their range. When motion is detected, the doorbell will capture photos and send an intelligent alarm push notification to your mobile phone, even if the doorbell is not pressed.

5.4 Doorbell Sharing

You can share access to your ASHATA X6 Video Doorbell with family members or trusted individuals through the mobile application. This allows multiple users to receive notifications and interact with the doorbell.

Image: Illustration of the group sharing feature, showing how multiple family members can connect to and receive alerts from the ASHATA X6 Video Doorbell via their smartphones.

6. Maintenance

6.1 Battery Charging

The ASHATA X6 Video Doorbell Host is equipped with an 800mAh rechargeable lithium battery. When the battery level is low, the mobile application will send a low battery reminder. Recharge the doorbell promptly using the provided USB charging cable.

6.2 Cleaning

To clean the doorbell camera lens and body, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the device.

7. Troubleshooting

• No Power/Not Turning On: Ensure the doorbell host is fully charged. Connect it to the charging cable and allow it to charge for several hours.
• Cannot Connect to Wi-Fi:
  • Ensure your Wi-Fi network is 2.4GHz. The doorbell does not support 5GHz networks.
  • Check your Wi-Fi password for accuracy.
  • Move the doorbell closer to your Wi-Fi router during the initial setup.
  • Reset the doorbell (refer to app instructions for reset procedure) and try pairing again.
• No Notifications:
  • Check your phone's app notification settings to ensure they are enabled for the ASHATA Smart app.
  • Ensure your phone has an active internet connection.
  • Verify that motion detection is enabled in the app settings.
• Poor Video Quality:
  • Ensure the camera lens is clean and free from obstructions.
  • Check your Wi-Fi signal strength at the doorbell's location. A weak signal can affect video streaming quality.
• Chime Not Ringing:
  • Ensure the chime unit is plugged into a working power outlet.
  • Verify that the chime's volume is not set to mute (0dB).
  • If the chime loses connection, unplug it and plug it back in to re-establish pairing.

8. Specifications

9. Warranty and Support

ASHATA products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or the official ASHATA website. Please have your model number (X6 or ASHATAki8ry0odxa) and purchase details ready when contacting support.