Lamshaw Magnetic Smart Watch Charger User Manual

1. Introduction

Thank you for choosing the Lamshaw Magnetic Smart Watch Charger. This charger is specifically designed to provide a safe and convenient charging solution for your NONGAMX KT71, KLOGIPOW KT71, or PAKRYS KT71 Smart Watch. This manual provides essential information on how to set up, operate, and maintain your charger, along with important safety guidelines.

Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Product Overview

The Lamshaw Magnetic Smart Watch Charger features a magnetic connection for easy and secure attachment to your compatible smartwatch. It includes built-in short-circuit protection to safeguard your device against overvoltage and overcurrent conditions.

Key Features:

• Magnetic Connection: Ensures a stable and reliable charge.
• Safety Protection: Integrated IC for short-circuit, overvoltage, and overcurrent protection.
• Portability: Compact and lightweight design for easy transport.
• Compatibility: Specifically designed for NONGAMX KT71, KLOGIPOW KT71, and PAKRYS KT71 Smart Watches.

Image: The Lamshaw magnetic smart watch charger cable, white color, showing the USB-A connector and the magnetic charging puck with two gold pins.

3. Setup and Charging Instructions

3.1 Connecting the Charger

1. Connect the USB-A end of the charging cable to a compatible power source, such as a computer USB port, a laptop, a power bank, or a wall charger (5V/1A recommended).
2. Ensure the power source is active.

Image: Illustration showing the charger connected to a computer, laptop, power bank, and wall charger, demonstrating various compatible power sources.

3.2 Charging Your Smart Watch

1. Align the magnetic charging puck with the charging contacts on the back of your NONGAMX KT71 series smart watch. The magnets will automatically snap into place.
2. Ensure the charging magnets attract correctly. If the magnets repel, the device will not charge. Adjust the orientation of the charging puck until a secure magnetic connection is established.
3. Once connected, your smart watch display will show a charging indicator, typically a battery icon with a charging animation or percentage.
4. Charging time may vary depending on the watch's battery level and the power source.

Image: Diagram illustrating the magnetic charging interface, showing correct and incorrect magnetic alignment for charging, and the charging status display on the smartwatch.

4. Safety Information

• Do not expose the charger to water or excessive moisture.
• Avoid extreme temperatures. Do not use or store the charger in very hot or cold environments.
• Do not attempt to disassemble or modify the charger. This may cause damage and void any warranty.
• Keep out of reach of children.
• Unplug the charger from the power source when not in use or during electrical storms.
• The built-in short-circuit protection IC will automatically cut off the circuit in case of a short-circuit or if the charger is left plugged in after the device is fully charged, ensuring safety.

5. Troubleshooting

Smart Watch is Not Charging:

• Check Magnetic Connection: Ensure the magnetic charging puck is correctly aligned and securely attached to the smartwatch's charging contacts. If the magnets repel, reverse the orientation of the charging puck.
• Verify Power Source: Make sure the USB-A end of the cable is firmly plugged into a working USB port or power adapter. Try a different USB port or power adapter if available.
• Inspect Cable: Check the charging cable for any visible damage or kinks.
• Clean Contacts: Ensure the charging contacts on both the charger and the smartwatch are clean and free of dust or debris.

6. Specifications

7. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.

If you encounter any issues not covered in this manual, please reach out to customer service for assistance.