1. Product Overview
The HTC Hair Clippers for Men is an all-in-one grooming solution designed for precision beard trimming and hair cutting. This cordless device features durable, rust-resistant stainless steel blades and is engineered for user-friendly operation with low-frequency vibrations, making it suitable for various users. Its lightweight and ergonomic design ensures comfortable handling during extended use.
Image 1.1: The HTC Hair Clippers shown with its included guide combs (1mm, 3mm, 5mm, 7mm).
2. Safety Information
Please read all safety instructions carefully before using the device. Failure to follow these instructions may result in injury or damage to the product.
- Avoid contact with eyes, skin, and water.
- Do not use on infants.
- Follow proper cleaning and maintenance procedures as outlined in this manual.
- Keep the device away from heat sources and open flames.
- Unplug the trimmer when not in use or during cleaning.
- Always supervise children when the trimmer is in use or accessible.
- Do not attempt to repair or modify the device yourself. Contact customer support for assistance.
3. Package Contents
Verify that all items are present in the package:
- HTC Hair Clippers Unit
- 4 Guide Combs (1mm, 3mm, 5mm, 7mm)
- USB Charging Cable
- Cleaning Brush
- Lubricating Oil
- Instruction Manual (this document)
4. Setup and Initial Use
4.1 Charging the Device
Before first use, fully charge the hair clippers. The device features a powerful rechargeable lithium battery.
- Connect the provided USB charging cable to the charging port on the clippers.
- Plug the other end of the USB cable into a DC adapter, power bank, or laptop USB port.
- Allow the device to charge for approximately 2 hours for a full charge. The charging indicator will typically show charging status and full charge.
- A full charge provides up to 110 minutes of cordless use.
Image 4.1: The hair clippers being charged via a USB cable.
4.2 Attaching and Removing Guide Combs
The clippers come with 4 guide combs (1mm, 3mm, 5mm, 7mm) for various hair lengths.
- To Attach: Align the guide comb with the blade and slide it onto the blade teeth until it clicks securely into place. Ensure it is firmly attached before use.
- To Remove: Gently push the guide comb upwards from the back, away from the blade, until it detaches.
Image 4.2: Visual guide for attaching and removing the trimmer head and guide combs.
5. Operating Instructions
5.1 Powering On/Off
The clippers feature a simple one-button design for ease of use.
- To turn on the device, press the power button located on the handle.
- To turn off the device, press the power button again.
5.2 Hair Cutting and Trimming
Ensure hair is clean and dry before trimming for best results.
- Select the desired guide comb length (1mm, 3mm, 5mm, or 7mm) and attach it securely. For very short trims or detailing, the clippers can be used without a comb.
- Hold the clippers with the blade flat against the skin or at a slight angle, moving against the direction of hair growth.
- Use slow, even strokes for a consistent cut.
- For beard trimming, start with a longer comb length and gradually reduce it until the desired length is achieved.
- The ergonomic design allows for comfortable handling and precise control.
Image 5.1: Using the clippers for hair cutting.
Image 5.2: Using the clippers for beard trimming.
5.3 Cordless and Corded Use
The clippers can be used cordlessly for up to 110 minutes on a full charge. If the battery is low or depleted, you can plug in the charging cable and continue to use the device while it charges.
6. Maintenance and Cleaning
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your clippers.
6.1 Cleaning the Blades
- Turn off the clippers and unplug it if connected to power.
- Remove the guide comb.
- Carefully detach the trimmer head by pushing it upwards from the backside (refer to Image 4.2).
- Use the provided cleaning brush to remove any trapped hair from the blades and inside the trimmer head.
- Reattach the trimmer head by inserting the lug into the guiding slot and pushing it towards the device until it clicks.
6.2 Oiling the Blades
To maintain blade sharpness and smooth operation, oil the blades regularly (after every few uses or as needed).
- Ensure the blades are clean and dry.
- Apply one or two drops of the provided lubricating oil evenly across the top of the blades.
- Turn on the clippers for a few seconds to allow the oil to distribute.
- Wipe off any excess oil with a soft cloth.
7. Troubleshooting
If you encounter issues with your HTC Hair Clippers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Clippers not turning on | Battery is depleted | Charge the device fully (refer to Section 4.1). |
| Poor cutting performance / pulling hair | Blades are dirty or not oiled | Clean and oil the blades (refer to Section 6). |
| Poor cutting performance / pulling hair | Guide comb not properly attached | Ensure the guide comb is securely clicked into place. |
| Device making unusual noise | Blades require lubrication | Apply lubricating oil to the blades (refer to Section 6.2). |
If the problem persists after trying these solutions, please contact customer support.
8. Product Specifications
- Model: B0D873DY45
- Brand: HTC
- Power Source: Battery Powered (1 Lithium Ion battery included)
- Battery Life: Up to 110 minutes cordless use
- Charging Time: Approximately 2 hours
- Product Dimensions: 1.54 x 1.38 x 6.3 inches
- Item Weight: 0.21 Kilograms (7.37 ounces)
- Blade Material: Stainless Steel
- Included Guide Combs: 1mm, 3mm, 5mm, 7mm
- Recommended Uses: Head, Beard
9. Warranty and Customer Support
HTC offers a 365-day replacement service from the date of purchase for this product. This warranty covers manufacturing defects and issues arising from normal use.
For any product-related questions, technical assistance, or to claim warranty service, please contact HTC customer support through the retailer's platform or the official HTC website. Please have your purchase receipt and product model number (B0D873DY45) ready when contacting support.
