Introduction
Thank you for purchasing the CCHKFEI Rechargeable Cordless Table Lamp. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new lamp. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
Key Features
- Cordless & Rechargeable: Equipped with a 4000mAh battery and USB-C charging for portable use.
- 3 Color Modes: Offers Warm (3000K), Warm White (4500K), and White (6000K) light options.
- Stepless Dimming: Adjustable brightness from 10% to 100% with a long touch.
- Touch Control: Simple touch interface for power, color, and brightness adjustments.
- Durable Design: Constructed from high-quality metal and acrylic, featuring an IP54 waterproof rating for outdoor use.
- Eye Protection: 63 bright LED lamp beads provide soft, flicker-free light, reducing eye fatigue.
- Long Battery Life: Provides 8-20 hours of illumination on a single 4.5-hour charge.
Package Contents
- 1x CCHKFEI Cordless Table Lamp
- 1x USB-C Charging Cable
- 1x User Manual (this document)
Image: The CCHKFEI Rechargeable Cordless Table Lamp, showcasing its sleek design and included USB-C charging cable.
Setup
- Initial Charge: Before first use, fully charge the lamp. Connect the provided USB-C cable to the charging port located underneath the lampshade (protected by a waterproof dust plug) and plug the other end into a compatible USB power adapter (not included). The charging indicator will show the charging status. A full charge takes approximately 4.5 hours.
- Placement: Place the lamp on a stable, flat surface. Its cordless design allows for flexible placement in living rooms, bedrooms, kitchens, or outdoor areas.
Image: The lamp demonstrating its IP54 waterproof rating in a light rain setting, highlighting the hidden USB-C charging port with its protective dust plug.
Operating Instructions
Power On/Off and Color Mode Selection
- To Turn On/Off: Lightly touch the top surface of the lamp once.
- To Change Color Mode: After turning on, tap the top surface of the lamp repeatedly to cycle through the three color modes: Warm (3000K), Warm White (4500K), and White (6000K).
Image: The lamp displaying its three distinct light color temperatures: Warm (3000K), Warm White (4500K), and White (6000K).
Adjusting Brightness (Stepless Dimming)
- To Adjust Brightness: While the lamp is on, press and hold your finger on the top surface of the lamp. The brightness will gradually increase or decrease. Release your finger when the desired brightness level (10%-100%) is reached.
- The lamp features a memory function, retaining the last brightness setting when turned off and on again.
Image: A visual representation of the lamp's stepless dimming capability, illustrating brightness levels from 10% to 100% via touch control.
Charging the Lamp
- When the battery is low, the light may dim or turn off.
- Locate the USB-C charging port under the lampshade. Remove the waterproof dust plug.
- Connect the provided USB-C cable to the lamp and a USB power source.
- The charging indicator will illuminate during charging and change color or turn off when fully charged.
- Ensure the dust plug is reinserted after charging to maintain IP54 water resistance.
Maintenance
- Cleaning: Wipe the lamp with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, ensuring no water enters the charging port or internal components. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place. It is recommended to charge the lamp fully every 3 months to preserve battery health.
- Water Resistance: The lamp is IP54 waterproof, meaning it is protected from dust and splashing water from any direction. It is suitable for outdoor use in light rain but should not be submerged in water. Always ensure the charging port dust plug is securely in place when not charging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp fully using the provided USB-C cable. |
| Lamp does not respond to touch. | Low battery; surface is wet or dirty. | Ensure the lamp is charged. Clean the touch surface with a dry cloth. |
| Brightness adjustment is not working. | Not holding touch long enough; low battery. | Press and hold the touch surface for a continuous adjustment. Ensure the lamp is charged. |
| Lamp is not charging. | Cable or adapter issue; charging port obstructed. | Check the USB-C cable and power adapter. Ensure the charging port is clear and the cable is fully inserted. |
Specifications
| Brand | CCHKFEI |
| Model Name | Table Lamp |
| Dimensions (D x W x H) | 5.9" x 5.9" x 14.6" (15cm x 15cm x 37cm) |
| Item Weight | 16 ounces (approx. 453g) |
| Material | Metal, Acrylic |
| Light Source Type | LED (63 lamp beads) |
| Color Temperatures | 3000K (Warm), 4500K (Warm White), 6000K (White) |
| Brightness Adjustment | 10% - 100% Stepless Dimming |
| Control Method | Touch |
| Power Source | Battery Powered (4000mAh Lithium Ion) |
| Charging Port | USB-C |
| Charging Time | Approx. 4.5 hours |
| Battery Life | 8-20 hours (depending on brightness setting) |
| Water Resistance | IP54 |
| Voltage | 5 Volts |
| UPC | 707630634857 |
Warranty and Support
This CCHKFEI product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please contact CCHKFEI customer support through the retailer's platform or the official brand website.
For further assistance, please visit the CCHKFEI Store on Amazon.