FREDEES Tall Nightstand with Charging Station and LED Lights

1. Introduction

Thank you for choosing the FREDEES Tall Nightstand. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new furniture. Please read this manual thoroughly before assembly and retain it for future reference.

2. Important Safety Information

• Assembly: Assembly requires two people. Do not attempt to lift or move the table alone due to its weight.
• Concealed Gun Drawer: Keep the gun drawer locked and out of reach of children. Always follow local laws and regulations regarding gun storage.
• Electrical Safety: Ensure the charging station is connected to a properly grounded power outlet. Do not overload the power strip. Keep liquids away from electrical components.
• Stability: Place the nightstand on a flat, stable surface. Do not climb on or lean heavily on the unit.
• Weight Capacity: Do not exceed the recommended weight capacity for shelves and drawers.

3. Package Contents

Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• All Plates (MDF board components)
• Instruction Manuals
• Toolkit (includes necessary hardware)
• Electric Drill (recommended, not included)

Figure 3.1: Overview of components, dimensions, and weight capacities.

4. Specifications

5. Assembly Instructions

Please follow the step-by-step instructions provided in the included manual. Lay out all parts on a clean, soft surface to prevent scratches. A power drill is recommended for faster assembly, but a manual toolkit is provided.

1. Identify all components and hardware using the parts list in the separate instruction manual.
2. Attach the drawer slides to the side panels as indicated. Note that drawer slides often come pre-assembled and need to be separated before installation.
3. Assemble the main frame of the nightstand, ensuring all connections are secure.
4. Install the back panel.
5. Assemble the drawers and insert them into the slides.
6. Attach the top and bottom sections of the nightstand.
7. Install the adjustable shelf within the storage cabinet.
8. Connect the LED lighting and charging station power cables.
9. Perform a final check to ensure all screws are tightened and the unit is stable.

Figure 5.1: Overview of storage features including the adjustable shelf and concealed drawer.

6. Operating Instructions

6.1. Using the Charging Station

The nightstand is equipped with a convenient charging station on its top surface.

• Wireless Charging: Place your compatible device directly on the wireless charging pad. Ensure the device is centered for optimal charging.
• USB Ports: Use the standard USB-A port to charge devices requiring a USB connection.
• Type-C Port: Use the Type-C port for devices compatible with USB-C charging.

Figure 6.1: The integrated charging station with wireless, USB, and Type-C options.

6.2. LED Light Operation

The nightstand features LED lighting with adjustable settings.

• Light Modes: The LED lights offer three distinct color modes: White light, Blue light, and Warm light. Short press the light switch to cycle through these modes.
• Brightness Adjustment: To adjust the brightness (0-100%), long press the light switch. Release when the desired brightness is achieved.
• Motion Sensing: The smart human body induction feature automatically turns on the light when motion is detected within approximately 1 meter, eliminating the need to search for a switch in the dark.

Figure 6.2: LED light modes and brightness adjustment.

Figure 6.3: Smart human body induction for automatic light activation.

6.3. Concealed Gun Drawer

The nightstand includes a concealed drawer designed for secure storage.

• Access: This drawer is secured by a magnetic lock. To open, place the provided magnetic key over the designated area on the top surface of the nightstand. The drawer will then unlock and can be pulled open.
• Security: Always ensure the drawer is properly closed and locked after use. Keep the magnetic key in a secure location, out of reach of unauthorized individuals, especially children.

Figure 6.4: Operation of the concealed gun drawer with magnetic key.

6.4. Adjustable Shelf

The upper storage cabinet features an adjustable shelf to accommodate items of various heights.

• Adjustment: To adjust the shelf height, carefully remove any items from the shelf. Lift the shelf slightly and slide it out of its current support pegs. Reinsert the support pegs into the desired holes on the cabinet sides, then place the shelf back onto the pegs.

7. Maintenance

• Cleaning: Wipe the nightstand surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
• Drawer Slides: Periodically check drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied.
• Electrical Components: Keep the charging station and LED lights free from dust. Do not attempt to disassemble or repair electrical components yourself.

8. Troubleshooting

9. Customer Support

If you encounter any issues not covered in this manual, or require further assistance, please do not hesitate to contact FREDEES customer support. We are available to help with any questions before or after your purchase.

For support, please visit the FREDEES Store on Amazon or refer to your purchase documentation for direct contact information.