Wiwreenm ZQ02360 150W Moving Head DJ Light User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your Wiwreenm ZQ02360 150W Moving Head DJ Light. Please read this manual thoroughly before installation and use. This device is designed to produce dynamic lighting effects for various events and venues.

2. Safety Information

• Electrical Safety: Ensure the power supply matches the device's requirements (AC 100-240V, 50/60Hz). Always disconnect power before cleaning or servicing.
• Mounting: Securely mount the fixture using appropriate clamps and safety cables. Ensure the mounting surface can support the device's weight (approximately 9.92 lbs / 4.5 kg).
• Eye Protection: Do not look directly into the light source. The intense light can cause eye damage.
• Ventilation: Ensure adequate ventilation around the fixture to prevent overheating. Do not block ventilation openings.
• Environment: This device is intended for indoor use only. Avoid exposure to moisture, extreme temperatures, or dusty environments.

3. Package Contents

Verify that all items are present in the package:

• Wiwreenm ZQ02360 Moving Head Light (x1)
• Power Cord (x1)
• Hook Accessory (x1)
• Instruction Manual (x1)

4. Setup

4.1 Mounting the Light

The moving head light can be mounted in various positions (e.g., truss, floor). Use the provided hook accessory to securely attach the light to a truss or other suitable structure. Always use a safety cable in addition to the primary mounting method.

4.2 Connecting Power

Connect the provided power cord to the 'POWER IN' port on the rear of the fixture and then to a suitable power outlet.

4.3 DMX Connection

For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port on the light. If linking multiple lights, connect from the 'DMX OUT' of the first light to the 'DMX IN' of the next, and so on.

Figure 1: Rear panel connections and control buttons.

5. Operating Modes

The Wiwreenm ZQ02360 offers several operating modes, selectable via the onboard LED display and buttons (MENU, UP, DOWN, ENTER).

Figure 2: Front view of the light with control panel.

5.1 Automatic Mode

In Automatic mode, the light cycles through pre-programmed effects without external input. This is ideal for quick setup and continuous operation.

5.2 Sound Activated Mode

The Sound Activated mode allows the light to react to ambient sound or music, creating dynamic effects synchronized with the audio. Use the control panel to adjust sensitivity if available.

5.3 Master-Slave Mode

Connect multiple ZQ02360 units via DMX cables. Set one unit as 'Master' and others as 'Slave'. The slave units will then mirror the master's effects, creating synchronized lighting displays.

5.4 DMX512 Control

For advanced control, connect the light to a DMX512 controller. The ZQ02360 supports 13 or 15 DMX channels, allowing precise control over various parameters such as pan, tilt, color, gobo, prism, dimmer, and strobe. Refer to the DMX channel chart in the included mini-manual for specific channel functions.

5.5 Key Features and Effects

• Light Source: 150W LED main light with a 24x12W 3-in-1 LED halo for ring effects.
• Color Temperature: 8000K for clear, bright beams.
• Dimming: 0-100% linear dimming for smooth intensity control.
• Colors: 7 colors plus white, with a 2-way rainbow effect.
• Gobos (Patterns): 7 fixed patterns.
• Prism: 3-facet prism for splitting the beam into multiple patterns, with adjustable rotation speed.
• Electronic Focus: Adjust focus to stack patterns or deform pattern pieces.
• Movement: Pan (X-axis) 540°, Tilt (Y-axis) 270° with adjustable speed.
• Strobe: Adjustable strobe speed from 1-25Hz.

Figure 3: Dynamic lighting effects from multiple units.

Figure 4: Dimensions and internal components of the light.

6. Maintenance

• Cleaning: Regularly clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners.
• Fan Maintenance: Ensure the cooling fan is free from dust and debris to maintain optimal performance and prevent overheating.
• Inspection: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage.

7. Troubleshooting

• No Power: Check power cable connection, power outlet, and ensure the power switch is on.
• No DMX Control: Verify DMX cable connections, DMX address settings on the light, and DMX controller output. Ensure the DMX mode is selected on the light.
• Light Not Moving/Responding: Check the selected operating mode. In DMX mode, ensure the DMX controller is sending appropriate commands.
• Overheating: Ensure proper ventilation. Clean any dust from the cooling fan and vents.

8. Specifications

9. Warranty & Support

This product comes with a 90-day manufacturer's warranty. For technical support, troubleshooting assistance, or warranty claims, please contact Wiwreenm customer service through your retailer or the official brand channels.