French Connection FCN093NBL

French Connection Cedric FCN093NBL Multi-Function Watch User Manual

Model: FCN093NBL

1. Introduction

This user manual provides comprehensive instructions for the French Connection Cedric FCN093NBL Multi-Function Watch. Please read this manual carefully to understand the proper operation, care, and maintenance of your timepiece. Retain this manual for future reference.

2. Product Overview

The French Connection Cedric FCN093NBL is an analog multi-function watch designed for daily wear. It features a round green dial, a gold-tone case, and a brown leather strap. The dial includes three sub-dials for day, date, and 24-hour display, along with a timer function.

French Connection Cedric FCN093NBL Multi-Function Watch, front view

Figure 2.1: Front view of the French Connection Cedric FCN093NBL Multi-Function Watch, showcasing its green dial, gold-tone case, and brown leather strap.

Side view of French Connection Cedric FCN093NBL watch showing crown and pushers

Figure 2.2: Side view of the watch, highlighting the crown and two pushers used for setting and operating the multi-function features.

Back view of French Connection Cedric FCN093NBL watch showing case back details

Figure 2.3: Rear view of the watch, displaying the stainless steel case back with model number FCN093NBL and water resistance rating.

3. Setup

3.1 Setting the Time

  1. Pull the crown (middle knob) out to position 2.
  2. Rotate the crown to move the hour and minute hands to the desired time. Ensure the 24-hour sub-dial is correctly aligned if setting AM/PM.
  3. Push the crown back into position 1 to start the watch.

3.2 Setting the Date and Day

The date and day sub-dials are typically adjusted using the crown in position 1 or specific pushers.

  1. Pull the crown out to position 1 (first click).
  2. Rotate the crown clockwise or counter-clockwise to adjust the date.
  3. Use the upper or lower pusher (refer to specific watch movement instructions if available, as this varies) to adjust the day of the week.
  4. Once set, push the crown fully back into its original position.

Note: Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.

3.3 Battery Installation

This watch is powered by a Lithium Ion battery (Silver Oxide cell). The battery is pre-installed. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.

4. Operating Multi-Function Features

4.1 Reading Sub-Dials

  • Day Sub-Dial: Indicates the current day of the week (e.g., SUN, MON, TUE).
  • Date Sub-Dial: Displays the current day of the month.
  • 24-Hour Sub-Dial: Shows the time in a 24-hour format, useful for distinguishing AM/PM.

4.2 Using the Timer (Chronograph)

The watch features a timer function, typically operated by the two pushers on the side of the case.

  1. Start: Press the upper pusher to start the timer. The chronograph second hand will begin to move.
  2. Stop: Press the upper pusher again to stop the timer. The elapsed time will be indicated by the chronograph hands.
  3. Reset: Press the lower pusher to reset the chronograph hands to their zero positions. This can only be done when the timer is stopped.

5. Maintenance

5.1 Cleaning

To maintain the appearance of your watch, wipe the case and strap regularly with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals.

5.2 Water Resistance

This watch has a water resistance rating of 3 ATM (30 meters). This means it is suitable for daily use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Ensure the crown is fully pushed in before any contact with water.

Diagram showing watch specifications including 30mm water resistance

Figure 5.1: Diagram illustrating key specifications, including the 30mm water resistance rating.

5.3 Battery Care

The included Silver Oxide battery typically lasts for several years. When the watch stops or the second hand begins to jump in irregular intervals (indicating low battery), have the battery replaced promptly by a professional to prevent leakage and damage to the movement.

6. Troubleshooting

  • Watch not running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
  • Incorrect time/date: Refer to Section 3 for instructions on setting the time and date.
  • Chronograph hands not resetting to zero: If the chronograph hands do not reset to the 12 o'clock position, they may need calibration. Consult a professional watch repair service.

7. Specifications

FeatureSpecification
BrandFrench Connection
Model NameCedric
Model NumberFCN093NBL
Display TypeAnalog
MovementQuartz (Battery Powered)
Battery TypeLithium Ion (Silver Oxide cell)
Special FeaturesMulti-Function (Day, Date, 24-Hour), Timer (Chronograph)
Water Resistance3 ATM (30 meters)
Dial Size44 mm
Case Thickness10 mm
Clasp TypeBuckle
Item Weight200 g
Product Dimensions20 x 20 x 8 cm
Country of OriginHong Kong

8. Warranty and Support

Your French Connection Cedric FCN093NBL Multi-Function Watch comes with a 1-year International warranty. This warranty covers manufacturing defects under normal use. Please refer to the warranty card included with your purchase for full terms and conditions.

ILG International Luxury Group Online Dealer Certificate for French Connection watches

Figure 8.1: Online Dealer Certificate confirming authenticity and warranty for French Connection watches sold via authorized channels.

For warranty claims, service, or technical support, please contact the authorized dealer or the manufacturer's service center. The manufacturer is ILG ASIA LIMITED, and the importer/packer in India is ILG INDIA FASHION LLP.

Importer/Packer Contact:
ILG INDIA FASHION LLP
Pinnacle Business Park, S7-9 7th floor,
Next to Ahura Center, Mahakali caves Road,
Andheri East, Mumbai - 400093

© 2024 French Connection. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.