DNYN Upholstered Full Size Platform Bed with Trundle Instruction Manual

Important Safety Information

• Do not load more than 400 pounds on the main bed or trundle.
• Always follow the assembly instructions carefully to prevent instability or collapse.
• Be careful around sharp edges during assembly and use.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
• Keep small parts away from children during assembly to prevent choking hazards.

Package Contents

Before beginning assembly, please ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Upholstered Headboard
• Upholstered Side Rails (2)
• Upholstered Footboard
• Trundle Frame with Slats
• Main Bed Slats (Set)
• Support Legs (for main bed and trundle)
• Hardware Pack (screws, bolts, washers, Allen wrench)

Setup and Assembly Instructions

Please read all instructions carefully before assembly. Two adults are recommended for assembly. Clear a spacious area for assembly and place all components on a soft, clean surface to prevent scratches.

1. Step 1: Attach Side Rails to Headboard and Footboard

   Connect the upholstered side rails to the headboard and footboard using the provided bolts and washers. Ensure the pre-drilled holes align correctly. Do not fully tighten bolts until all major components are connected.

   

   Image description: A view of the bed frame partially assembled, showing the upholstered headboard, footboard, and side rails connected. The wooden slats are not yet installed.

2. Step 2: Install Main Bed Slats

   Place the wooden slats across the bed frame, fitting them into the designated slots or attaching them with screws if required. Ensure even spacing and secure attachment for proper mattress support.

   

   Image description: The main bed frame with wooden slats laid across the support beams, ready for mattress placement. The headboard and footboard are visible.

3. Step 3: Assemble the Trundle Bed

   Assemble the trundle frame according to the separate instructions for the trundle unit. Attach the wheels to the bottom of the trundle frame. Install the trundle slats, ensuring they are securely fastened.

   

   Image description: A grey upholstered bed frame with the trundle unit partially extended from underneath. Both the main bed and the trundle show their respective wooden slat supports.

4. Step 4: Final Tightening and Placement

   Once all components are assembled, fully tighten all bolts and screws. Place the assembled bed in its desired location. Ensure the trundle slides smoothly in and out.

   

   Image description: A complete DNYN upholstered full size platform bed with the trundle extended, featuring a grey fabric finish and a tufted headboard, situated in a modern bedroom.

Operating Instructions

Using the Trundle Bed

The trundle bed is designed for convenient extra sleeping space. To use, gently pull the trundle frame from underneath the main bed. The wheels allow for smooth extension. To store, push the trundle back underneath the main bed until it is fully concealed.

Mattress Placement

For the main platform bed, a mattress thickness of 8-10 inches is recommended. For the trundle bed, a mattress thickness of 6 inches is recommended to ensure it fits properly underneath the main bed when stored.

Maintenance

Cleaning

• Fabric Upholstery: Spot clean with a damp cloth and mild detergent. Blot dry immediately. Do not use harsh chemicals or abrasive cleaners.
• Wood Components: Wipe with a soft, dry cloth. Avoid excessive moisture.

General Care

• Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Avoid dragging the bed when moving it; lift it to prevent damage to the frame and flooring.
• Do not jump on the bed or trundle, as this can compromise the structural integrity.

Troubleshooting

• Squeaking Noises: Check all connections and tighten any loose bolts or screws. Ensure slats are properly seated.
• Trundle Not Sliding Smoothly: Check for obstructions underneath the main bed. Ensure trundle wheels are clean and free of debris. Verify that the trundle frame is assembled correctly and not warped.
• Instability: Re-check all assembly steps. Ensure all hardware is fully tightened. Verify that the bed is placed on a flat, even surface.

Specifications

Image description: A technical diagram illustrating the key dimensions of the DNYN Full Size Platform Bed with Trundle, including length, width, and height measurements for both the main bed and the trundle unit.

Warranty Information

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact DNYN customer support.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact DNYN customer support. Please have your model number (Upholstered Full Size) and purchase information ready when contacting support.

• Online Support: Visit the official DNYN website for FAQs and contact options.
• Email: Refer to your purchase documentation for direct email support.