Introduction
Thank you for choosing the NARWAL S10 Pro Lightweight Cordless Vacuum Mop. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new floor cleaner. Please read it thoroughly before first use and keep it for future reference.
The NARWAL S10 Pro Cordless Vacuum Mop, shown alongside an additional microfiber roller brush.
Key Features:
- Heavy Messes, One Pass Perfection: Features 14,000Pa suction power and 17N mopping pressure for thorough cleaning of spills, stains, and crumbs.
- Self-Cleaning & Drying: One-click automatic cleaning of brushes and pipes, followed by hot air drying to maintain hygiene and freshness.
- Low Reach, High Coverage: Designed with 180° fold-flat flexibility and 0.23-inch precise edge cleaning for comprehensive coverage.
- Superior Cleaning Efficiency: Equipped with dense microfibers to effectively capture and hold spills, oil, and debris.
- Anti-Tangle Design: Roller brush constructed to minimize tangles, ensuring smooth and fast cleaning.
Setup
Unpacking and Assembly:
Carefully remove all components from the packaging. Ensure all parts are present before assembly. The main unit, handle, clean water tank, dirty water tank, charging base, and roller brush are typically included.
The NARWAL S10 Pro main unit, charging base, roller brush, cleaning brush, and filter are shown as included accessories.
- Attach the Handle: Insert the handle into the main body of the vacuum mop until it clicks securely into place.
- Install Water Tanks: Ensure the clean water tank and dirty water tank are correctly seated in their respective compartments.
- Install Roller Brush: Align the roller brush with its slot at the bottom of the cleaning head and push it in until it locks.
Initial Charging:
Before first use, fully charge the device. Place the vacuum mop on its charging base. The indicator lights on the device will show charging status. A full charge typically takes approximately 4-5 hours.
Filling the Clean Water Tank:
Open the cap of the clean water tank and fill it with clean tap water. For optimal cleaning, you may add a small amount of NARWAL-approved cleaning solution, following the solution's instructions. Do not overfill.
Operating Instructions
Powering On/Off:
Press the power button located on the handle to turn the device on. Press and hold the power button to turn it off.
Cleaning Modes:
The NARWAL S10 Pro offers multiple cleaning modes to suit various needs:
- Auto Mode (AI DirtSense™): Intelligently measures dirt level and automatically adjusts suction and water levels for efficient cleaning.
- Max Mode: Provides maximum suction and water flow for heavily soiled areas. Activate with one-click enhancement.
- Suction Mode: For dry vacuuming or picking up liquid spills without mopping.
- Stain Buster Mode: Optimized for tackling stubborn stains.
- Whisper Clean Mode: Operates at a lower noise level for quieter cleaning.
The handle display of the NARWAL S10 Pro, illustrating the five available cleaning modes: One-Click Max, Dirt Detect (Auto), Water Suction, Whisper Clean, and Stain Buster.
Cleaning Performance:
The S10 Pro delivers 14,000Pa suction power and 17N mopping pressure, ensuring effective cleaning of various messes, from large particles and pet food to pet hair, egg, ketchup, and yogurt. It is designed for hard floor compatibility only.
The NARWAL S10 Pro is capable of cleaning a wide range of messes including large particles, pet food, pet hair, egg, ketchup, and yogurt on hard floors.
Maneuverability:
The device features 180° fold-flat flexibility, allowing it to easily reach under furniture and into tight spaces. Its precise edge cleaning capability (0.23 inches) ensures thorough coverage along walls and corners.
The NARWAL S10 Pro demonstrating its 180-degree fold-flat flexibility, allowing it to reach under low furniture.
Maintenance
Self-Cleaning and Drying:
After each use, place the vacuum mop on its charging base and initiate the self-cleaning cycle. This function automatically cleans the roller brush and internal pipes. Following the wash, hot air drying ensures the brush remains clean and fresh, preventing odors and bacterial growth.
The NARWAL S10 Pro's self-cleaning process, showing water flowing through the brush, and the hot air drying process, ensuring the brush remains clean and dry.
Manual Roller Brush Cleaning:
For optimal performance, occasional manual cleaning of the roller brush is recommended, especially if excessive hair or debris accumulates.
- Remove the Roller Brush: Pull up the roller brush handle from the left end to easily remove it from the cleaning head.
- Clean the Brush: Use clean water and the included cleaning brush to remove any residual hair or debris from the roller.
Step-by-step guide on removing the roller brush and cleaning it with water and the provided brush tool.
Emptying the Dirty Water Tank:
After each cleaning session or when the dirty water tank is full, remove it from the device and empty its contents. Rinse the tank with clean water to prevent odors and buildup.
A detailed view of the dirty water tank (left) and clean water tank (right) on the NARWAL S10 Pro.
Filter Maintenance:
Regularly check and clean the filter to maintain optimal suction performance. Rinse the filter under running water and allow it to air dry completely before reinserting. Do not use the device with a wet filter.
Troubleshooting
Common Issues and Solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on | Low battery; improper assembly | Charge the device; ensure handle is securely attached. |
| Poor suction/cleaning performance | Dirty water tank full; clogged filter; roller brush tangled | Empty dirty water tank; clean filter; remove debris from roller brush. |
| Unpleasant odor | Dirty water tank not cleaned; roller brush not dried properly | Empty and rinse dirty water tank; ensure roller brush is fully dried after self-cleaning or manual wash. |
| Water leakage | Water tanks not properly installed; tank caps not sealed | Reinstall water tanks securely; ensure all caps are tightly closed. |
Frequently Asked Questions (Q&A):
Q: Can the roller brush be placed under direct sunlight to dry after cleaning?
A: The device has a self-cleaning and drying function. If manual maintenance is needed, place it in a well-ventilated, cool place to dry before next use. Avoid direct sunlight as much as possible to extend the product's lifespan.
A question and answer section addressing the proper drying method for the roller brush.
Specifications
| Feature | Detail |
|---|---|
| Brand | NARWAL |
| Model Number | S10 Pro |
| Special Feature | Bagless |
| Filter Type | Cloth |
| Included Components | Mop |
| Cordless | Yes |
| Runtime | 50 minutes |
| Maximum Suction | 14,000 Pa (1.4E+4 Millimeters) |
| Mopping Pressure | 17N |
| Controller Type | Push Button |
| Portable | Yes |
| Number of Power Levels | 1 |
| Number of Wheels | 2 |
| Indoor/Outdoor Usage | Indoor |
| Finish Type | Glossy |
| ASIN | B0D73LFKQQ |
Warranty and Support
Limited Warranty:
The NARWAL S10 Pro comes with a standard limited warranty covering manufacturing defects from the date of purchase. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
Customer Support:
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact NARWAL customer support. Visit the official NARWAL website for the most up-to-date contact information or refer to the support details provided in your product packaging.
For more information, visit the NARWAL Store on Amazon.
